Hallo Andreas, Am Sonntag 07 März 2004 14:36 schrieb Andreas Janssen: > Wenn Deine Brennprogramme neu genug sind, dann lass die > ide-scsi-Emulation weg.
ich habe in der lilo.conf jetzt mal aus der append zeile die scsi emulation herausgenommen. Jetzt startet k3b problemlos, allerdings wird jetzt cdrecord nicht mehr gefunden. Ich denke, dass das an der ATAPI Unterstützung liegt. cdrecord erkent die beiden Brenner aber # /usr/bin/cdrecord dev=ATAPI:/dev/hdd -atip Cdrecord-Clone 2.01a26 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling [...] scsidev: 'ATAPI:/dev/hdc' devname: 'ATAPI:/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related libscg interface code is in pre alpha. Using libscg version 'schily-0.8'. [...] Identifikation : 'DVDRAM GSA-4040B' [...] usw. $ whereis cdrecord cdrecord: /usr/bin/cdrecord $ ll /usr/bin/cdrecord -rwsr-xr-- 1 root cdrom 133 2004-03-04 21:21 /usr/bin/cdrecord $ groups cdrom cdrecording ll /dev/hd? [...] brw-rw---- 1 root cdrecording 22, 0 2004-03-05 11:52 /dev/hdc brw-rw---- 1 root cdrecording 22, 64 2004-03-05 11:52 /dev/hdd [...] Im k3b Setup lässt sich cdrecord einrichten, allerdings vergisst k3b das direkt wieder. Ole Bahlmann postete Heute Mittag ähnliche Probleme mit k3b... Zum Mausproblem: $ cat /proc/bus/input/devices I: Bus=0011 Vendor=0002 Product=0001 Version=0001 N: Name="PS/2 Logitech Mouse" P: Phys=isa0060/serio1/input0 H: Handlers=mouse0 event1 B: EV=7 B: KEY=30000 0 0 0 0 0 0 0 0 B: REL=3 Das ist wohl auch der Grund, weshalb ich /etc/init.d/gpm modifizierte. Zuerst muß isa0060/serio1/input0 über mdetect angesprochen werden, damit gpm sie über /dev/input/mouse0 einbinden kann (Handler). Ohne dies "Aktivierung" erkennt wiederum der xserver keine maus (/dev/input/mouse0 in XF86config-4), und startet nicht. Ich habe nun nochmals im kernel /dev/psaux eingestellt, was aber zum Einfrieren führt. Jedenfalls könnte ich damit leben, wenn auch die anderen Geräte unterstützt würden. Zum USB Problem: $ dmesg |grep usb drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub drivers/usb/core/usb.c: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver $ sudo /etc/init.d/hotplug restart Restarting hotplug subsystem:Stopping hotplug subsystem: input pci usb. Starting hotplug subsystem: inputkernel driver evdev already loaded kernel driver evdev already loaded pci** can't synthesize pci hotplug events usb. $ mount |grep usb nix gemountet außer: sysfs on /sys type sysfs (rw) $ lsmod |grep usb usbkbd 7552 0 usbcore 115676 2 ehci_hcd,usbkbd $ lsusb nix $ lspci |grep USB 00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 0e) 00:07.3 USB Controller: VIA Technologies, Inc. USB (rev 0e) $ grep USB /usr/src/linux/.config # CONFIG_USB_IRDA is not set CONFIG_VIDEO_CPIA_USB=m # Supported USB Adapters CONFIG_DVB_TTUSB_BUDGET=m # CONFIG_DVB_TTUSB_DEC is not set # ALSA USB devices CONFIG_SND_USB_AUDIO=m # USB support CONFIG_USB=m CONFIG_USB_DEBUG=y # Miscellaneous USB options CONFIG_USB_DEVICEFS=y CONFIG_USB_BANDWIDTH=y # CONFIG_USB_DYNAMIC_MINORS is not set # USB Host Controller Drivers CONFIG_USB_EHCI_HCD=m # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # USB Device Class drivers CONFIG_USB_AUDIO=m # CONFIG_USB_BLUETOOTH_TTY is not set CONFIG_USB_MIDI=m CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=m CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y CONFIG_USB_STORAGE_DPCM=y CONFIG_USB_STORAGE_HP8200e=y CONFIG_USB_STORAGE_SDDR09=y # CONFIG_USB_STORAGE_SDDR55 is not set CONFIG_USB_STORAGE_JUMPSHOT=y # USB Human Interface Devices (HID) CONFIG_USB_HID=m # CONFIG_USB_HIDINPUT is not set CONFIG_USB_HIDDEV=y # USB HID Boot Protocol drivers CONFIG_USB_KBD=m CONFIG_USB_MOUSE=m CONFIG_USB_AIPTEK=m CONFIG_USB_WACOM=m # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # USB Imaging devices CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # CONFIG_USB_HPUSBSCSI is not set # USB Multimedia devices # CONFIG_USB_VICAM is not set CONFIG_USB_DSBR=m CONFIG_USB_IBMCAM=m # CONFIG_USB_KONICAWC is not set CONFIG_USB_OV511=m # CONFIG_USB_PWC is not set # CONFIG_USB_SE401 is not set CONFIG_USB_STV680=m # CONFIG_USB_W9968CF is not set # USB Network adaptors CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m # CONFIG_USB_RTL8150 is not set CONFIG_USB_USBNET=m # USB Host-to-Host Cables CONFIG_USB_AN2720=y CONFIG_USB_BELKIN=y CONFIG_USB_GENESYS=y CONFIG_USB_NET1080=y CONFIG_USB_PL2301=y # Intelligent USB Devices/Gadgets CONFIG_USB_ARMLINUX=y CONFIG_USB_EPSON2888=y CONFIG_USB_ZAURUS=y CONFIG_USB_CDCETHER=y # USB Network Adapters # CONFIG_USB_AX8817X is not set # USB port drivers CONFIG_USB_USS720=m # USB Serial Converter support CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y CONFIG_USB_SERIAL_BELKIN=m CONFIG_USB_SERIAL_WHITEHEAT=m CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_EMPEG is not set CONFIG_USB_SERIAL_FTDI_SIO=m CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KLSI=m # CONFIG_USB_SERIAL_KOBIL_SCT is not set CONFIG_USB_SERIAL_MCT_U232=m CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_CYBERJACK is not set CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_OMNINET=m CONFIG_USB_EZUSB=y # USB Miscellaneous drivers # CONFIG_USB_EMI62 is not set CONFIG_USB_EMI26=m # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_LED is not set # CONFIG_USB_TEST is not set # USB Gadget Support CONFIG_USB_GADGET=m CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=m # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_SA1100 is not set CONFIG_USB_ZERO=m CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_FILE_STORAGE_TEST=y CONFIG_USB_G_SERIAL=m Es wäre schön, wenn mir jemand auf die Sprünge helfen könnte, zumal der 2.6.4-rc3 patch bei mir nicht kompiliert (ide-proc.c). ciao Gerhard -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)
