hallo,

du kannst versuchen, dass du die option in
Section "Device"
Option "UseFBDev" "true"
nicht verwendest.
Oder probier mal, dass du nur eine DefaultDepth von 8 verwendest und als letzte hilfe, probier es mit vesa.


Gruss,
Harald



Matthias wrote:
Hallo,

vielen Dank für die erste schnelle Antwort.


ich probiere jetzt schon eine Weile rum. Aber nur mit den gegoogleten
Tips, habe ich es nicht geschafft. Heute will ich es nun endlich
schaffen. Folgende Meldungen werden generiert. Ich hoffe mir kann
jemand sagen, was an meinem screen nicht brauchbar konfiguriert ist

...


das ist bei X oft so, dass man da rumprobiert ;)

Btw. ich würde dir vorschlagen erstmal deine XF86config zu posten und
vielleicht noch was du für ein system hast, + Kernel usw.

Ich hänge unten an Mail den Inhalt meiner XF86Config-4 an.
Ich verwende Kernel 2.2.20


Matthias



### BEGIN DEBCONF SECTION
# XF86Config-4 (XFree86 server configuration file) generated by dexconf,
the
# Debian X Configuration tool, using values from the debconf database.
#
# Edit this file with caution, and see the XF86Config-4 manual page.
# (Type "man XF86Config-4" at the shell prompt.)
#
# If you want your changes to this file preserved by dexconf, only make
changes
# before the "### BEGIN DEBCONF SECTION" line above, and/or after the
# "### END DEBCONF SECTION" line below.
#
# To change things within the debconf section, run the command:
#   dpkg-reconfigure xserver-xfree86
# as root.  Also see "How do I add custom sections to a
dexconf-generated
# XF86Config or XF86Config-4 file?" in
/usr/share/doc/xfree86-common/FAQ.gz.

Section "Files"
        FontPath        "unix/:7100"                  # local font
server
        # if the local font server has problems, we can fall back on
these
        FontPath        "/usr/lib/X11/fonts/misc"
        FontPath        "/usr/lib/X11/fonts/cyrillic"
        FontPath        "/usr/lib/X11/fonts/100dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/75dpi/:unscaled"
        FontPath        "/usr/lib/X11/fonts/Type1"
        FontPath        "/usr/lib/X11/fonts/Speedo"
        FontPath        "/usr/lib/X11/fonts/100dpi"
        FontPath        "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
        Load    "GLcore"
        Load    "bitmap"
        Load    "dbe"
        Load    "ddc"
        Load    "dri"
        Load    "extmod"
        Load    "freetype"
        Load    "glx"
        Load    "int10"
        Load    "pex5"
        Load    "record"
        Load    "speedo"
        Load    "type1"
        Load    "vbe"
        Load    "xie"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "keyboard"
        Option          "CoreKeyboard"
        Option          "XkbRules"    "xfree86"
        Option          "XkbModel"    "pc104"
        Option          "XkbLayout"   "de"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"              "/dev/psaux"
        Option          "Protocol"            "PS/2"
        Option          "Emulate3Buttons"     "true"
        Option          "ZAxisMapping"                "4 5"
EndSection

Section "InputDevice"
        Identifier      "Generic Mouse"
        Driver          "mouse"
        Option          "SendCoreEvents"      "true"
        Option          "Device"              "/dev/input/mice"
        Option          "Protocol"            "ImPS/2"
        Option          "Emulate3Buttons"     "true"
        Option          "ZAxisMapping"                "4 5"
EndSection

Section "Device"
        Identifier      "Generic Video Card"
        Driver          "ati"
        Option          "UseFBDev"            "true"
EndSection

Section "Monitor"
        Identifier      "NEC MultiSync FE700"
        HorizSync       30-60
        VertRefresh     50-75
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "Generic Video Card"
        Monitor         "NEC MultiSync FE700"
        DefaultDepth    24
        SubSection "Display"
                Depth           1
                Modes           "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           4
                Modes           "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           8
                Modes           "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           15
                Modes           "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           16
                Modes           "800x600" "640x480"
        EndSubSection
        SubSection "Display"
                Depth           24
                Modes           "800x600" "640x480"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"
        InputDevice     "Generic Mouse"
EndSection

Section "DRI"
        Mode    0666
EndSection

### END DEBCONF SECTION


--


Harald Krammer
Brucknerstrasse 33
A - 4020  Linz
AUSTRIA

Mobil +43.(0) 664. 130 59 58
Mail: [EMAIL PROTECTED]

Please avoid sending me Word or PowerPoint attachments.
See
http://www.fsf.org/philosophy/no-word-attachments.html


--
Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/


Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)



Antwort per Email an