Betreff: Xsession nur für root? Von: Steffen Hey <[EMAIL PROTECTED]> Datum: Tue, 27 Jul 2004 11:58:41 +0200
Hallo, im Moment kann nur root eine xsession starten. Ich habe an meinen Einstellungen nichts geändert, allerdings heute morgen, dummerweise als superuser, ein Verzeichniss von einer anderen Festplatte ins /home/eines_anderen_Users kopiert, da dieser keinen Zugriff auf die Platte hatte. Zunächst dachte ich, das Problem gelöst zu haben, df zeigte nämlich 100% für /home das ist mittlerweile behoben aber dennoch kann ich nur als root eine Xsession starten. Ich benutze kdm. Hab mal von der Konsole als normaler_user "startx 2>xsession.err" gemacht, das Ergeniss: ########################################################################## This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to [EMAIL PROTECTED] and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present (==) Log file: "/var/log/XFree86.0.log", Time: Tue Jul 27 11:32:15 2004 (==) Using config file: "/etc/X11/XF86Config-4" Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) ServerLayout "Default Layout" (**) |-->Screen "Default Screen" (0) (**) | |-->Monitor "Medion 19 Zoll" (**) | |-->Device "Matrox G450" (**) |-->Input Device "Generic Keyboard" (**) XKB: rules: "xfree86" (**) XKB: model: "pc105" (**) XKB: layout: "de" (**) XKB: variant: "nodeadkeys" (**) |-->Input Device "Configured Mouse" (**) FontPath set to "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" (==) ModulePath set to "/usr/X11R6/lib/modules" (--) using VT number 7 (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (--) PCI: (0:11:0) BrookTree unknown chipset (0x036e) rev 17, Mem @ 0xeb002000/12 (--) PCI:*(1:0:0) Matrox MGA G400 AGP rev 130, Mem @ 0xe8000000/25, 0xe4000000/14, 0xe5000000/23 (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a (II) Module GLcore: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a (II) Module dbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libddc.a (II) Module ddc: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a (II) Module dri: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a (II) Module drm: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a (II) Module extmod: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a (II) Module freetype: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.1.9 (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a (II) Module glx: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/linux/libint10.a (II) Module int10: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libpex5.a (II) Module pex5: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a (II) Module record: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.13.0 (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a (II) Module speedo: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a (II) Module type1: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libvbe.a (II) Module vbe: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/extensions/libxie.a (II) Module xie: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/drivers/mga_drv.o (II) Module mga: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.1 (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o (II) Module mouse: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) MGA: driver for Matrox chipsets: mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag100, mgag100 PCI, mgag200, mgag200 PCI, mgag400 (--) Assigning device section with no busID to primary device (--) Chipset mgag400 found (II) Loading /usr/X11R6/lib/modules/libvgahw.a (II) Module vgahw: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (**) MGA(0): Depth 16, (--) framebuffer bpp 16 (==) MGA(0): RGB weight 565 (WW) Warning, couldn't open module mga_hal (EE) MGA: Failed to load module "mga_hal" (module does not exist, 0) (II) MGA(0): Matrox HAL module not found - using builtin mode setup instead (--) MGA(0): Chipset: "mgag400" (**) MGA(0): Using AGP 2x mode (--) MGA(0): Linear framebuffer at 0xE8000000 (--) MGA(0): MMIO registers at 0xE4000000 (--) MGA(0): Pseudo-DMA transfer window at 0xE5000000 (==) MGA(0): BIOS at 0xC0000 (--) MGA(0): Video BIOS info block at offset 0x07720 (WW) MGA(0): Video BIOS info block not detected! (**) MGA(0): VideoRAM: 16384 kByte (II) Loading /usr/X11R6/lib/modules/libi2c.a (II) Module i2c: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.2.0 (==) MGA(0): Write-combining range (0xe8000000,0x1000000) (II) MGA(0): I2C bus "DDC" initialized. (II) MGA(0): I2C device "DDC:ddc2" registered. (II) MGA(0): I2C device "DDC:ddc2" removed. (II) MGA(0): I2C Monitor info: (nil) (II) MGA(0): end of I2C Monitor info (--) MGA(0): No DDC signal (II) MGA(0): DDC Monitor info: (nil) (II) MGA(0): end of DDC Monitor info (==) MGA(0): Using gamma correction (1.0, 1.0, 1.0) (==) MGA(0): Min pixel clock is 12 MHz (==) MGA(0): Max pixel clock is 360 MHz (II) MGA(0): Medion 19 Zoll: Using hsync range of 30.00-98.00 kHz (II) MGA(0): Medion 19 Zoll: Using vrefresh range of 50.00-160.00 Hz (II) MGA(0): Clock range: 12.00 to 360.00 MHz (II) MGA(0): Not using default mode "1600x1200" (hsync out of range) (II) MGA(0): Not using default mode "1792x1344" (hsync out of range) (II) MGA(0): Not using default mode "1856x1392" (hsync out of range) (II) MGA(0): Not using default mode "1920x1440" (hsync out of range) (--) MGA(0): Has SDRAM (--) MGA(0): Virtual size is 1600x1200 (pitch 1600) (**) MGA(0): Default mode "1600x1200": 202.5 MHz, 93.8 kHz, 75.0 Hz (**) MGA(0): Default mode "1280x960": 148.5 MHz, 85.9 kHz, 85.0 Hz (**) MGA(0): Default mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz (**) MGA(0): Default mode "1024x768": 94.5 MHz, 68.7 kHz, 85.0 Hz (**) MGA(0): Default mode "800x600": 56.3 MHz, 53.7 kHz, 85.1 Hz (++) MGA(0): DPI set to (100, 100) (II) Loading /usr/X11R6/lib/modules/libfb.a (II) Module fb: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libxaa.a (II) Module xaa: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 1.0.0 (II) Loading /usr/X11R6/lib/modules/libramdac.a (II) Module ramdac: vendor="The XFree86 Project" compiled for 4.1.0.1, module version = 0.1.0 (==) MGA(0): Write-combining range (0xe8000000,0x1000000) (--) MGA(0): 16 DWORD fifo (==) MGA(0): Default visual is TrueColor (II) MGA(0): [drm] bpp: 16 depth: 16 (II) MGA(0): [drm] Sarea 2200+664: 2864 (II) MGA(0): [drm] created "mga" driver at busid "PCI:1:0:0" (II) MGA(0): [drm] added 4096 byte SAREA at 0xe1974000 (II) MGA(0): [drm] mapped SAREA 0xe1974000 to 0x4001c000 (II) MGA(0): [drm] framebuffer handle = 0xe8000000 (II) MGA(0): [drm] added 1 reserved context for kernel (II) MGA(0): [agp] Mode 0x07000203 [AGP 0x1106/0x0691; Card 0x102b/0x0525] (II) MGA(0): [agp] 12288 kB allocated with handle 0xe2977000 (II) MGA(0): [agp] WARP microcode handle = 0xe0000000 (II) MGA(0): [agp] WARP microcode mapped at 0x419c0000 (II) MGA(0): [agp] Primary DMA handle = 0xe0008000 (II) MGA(0): [agp] Primary DMA mapped at 0x419c8000 (II) MGA(0): [agp] DMA buffers handle = 0xe0108000 (II) MGA(0): [agp] DMA buffers mapped at 0x41ac8000 (II) MGA(0): [drm] Added 128 65536 byte DMA buffers (II) MGA(0): [drm] Registers handle = 0xe4000000 (II) MGA(0): [drm] Status handle = 0xe2980000 (II) MGA(0): [agp] Status page mapped at 0x4001d000 (II) MGA(0): [dri] visual configs initialized (II) MGA(0): Memory manager initialized to (0,0) (1600,2400) (II) MGA(0): Largest offscreen area available: 1600 x 1200 (II) MGA(0): Reserved back buffer at offset 0x754000 (II) MGA(0): Reserved depth buffer at offset 0xafe000 (II) MGA(0): Reserved 1376 kb for textures at offset 0xea8000 (II) MGA(0): Using XFree86 Acceleration Architecture (XAA) Screen to screen bit blits Solid filled rectangles Solid filled trapezoids 8x8 mono pattern filled rectangles 8x8 mono pattern filled trapezoids Indirect CPU to Screen color expansion Screen to Screen color expansion Solid Lines Dashed Lines Scanline Image Writes Offscreen Pixmaps Setting up tile and stipple cache: 32 128x128 slots 19 256x256 slots (==) MGA(0): Backing store disabled (==) MGA(0): Silken mouse enabled (**) MGA(0): DPMS enabled (II) MGA(0): Using overlay video (II) MGA(0): X context handle = 0x00000003 (II) MGA(0): [drm] installed DRM signal handler (II) MGA(0): [DRI] installation complete (II) MGA(0): [drm] Mapped 128 DMA buffers (==) MGA(0): Direct rendering enabled PEXExtensionInit: Couldn't open default PEX font file Roman_M (II) Keyboard "Generic Keyboard" handled by legacy driver (**) Configured Mouse: Protocol: "ImPS/2" (**) Configured Mouse: Core Pointer (==) Configured Mouse: Buttons: 3 (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 (**) Configured Mouse: ZAxisMapping: buttons 4 and 5 (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) (II) MGA(0): [drm] removed 1 reserved context for kernel (II) MGA(0): [drm] unmapping 4096 bytes of SAREA 0xe1974000 at 0x4001c000 waiting for X server to shut down ######################################################################### Als root fehlen die beiden letzten Zeilen. Hat jemand eine Idee oder braucht's noch ein log. Gruß Steffen -- Vorsicht: Einige Klugscheißer haben Ideendurchfall. -- Haeufig gestellte Fragen und Antworten (FAQ): http://www.de.debian.org/debian-user-german-FAQ/ Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED] mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)