On 14/08/2004 Uwe Kerstan wrote: > Bei mir steht da: video=matroxfb:[EMAIL PROTECTED] > mit dem vesa habe ich das noch nie probiert.
ich weiß nicht, habe das gemacht, wie in kernel-source/Documentation/fb/matroxfb.txt beschrieben. denke, das :vesa: wird bei dir automatisch ergänzt. > $ echo $COLUMNS $LINES > 100 37 128 48 (sollte aber nichts zur sache tun) > > da ich des öfteren gelesen habe, das DRM/DRI support mit X irgendwie > > probleme zusammen mit matroxfb macht, > > Problematisch war IMHO lk 2.6.[0|1|2|3|4], ab 2.6.5 geht es eigentlich > wieder ganz gut. > Also ich habe dri und matroxfb zu laufen. Manchmal gibts Probleme > bei der Umschaltung X --> Console. Wenn man sich dann länger auf der > Console aufhält gibt es bunte Streifen. Kurze Abhilfe schafft eine > Umschaltung auf eine andere Console. genau dieses problem meine ich ;-( aus linux-2.6.8/Documentation/fb/matroxfb.txt: [ ...] Running XFree86 4.x accelerated mga driver is possible, but you must not enable DRI - if you do, resolution and color depth of your X desktop must match resolution and color depths of your virtual consoles, otherwise X will corrupt accelerator settings. ich habe in XF86Config-4: DefaultDepth 24 [...] Modes "1280x1024" "1152x864" "1024x768" also wird x per default mit der auflösung "1280x1024" und depth 24 gestartet. video=matroxfb:vesa:0x118 bedeutet: 1024x768 mit 32bpp in X kann ich aber kein '32' als depth angeben, 24 ist das höchste. ich werde nun den mode 0x1BB mal probieren, was bedeutet: 1280x1024 mit 24bpp vielleicht hilft das ... ;) > DRI läuft einwandfrei. Tuxracer und Konsorten plus alle Bildschirmschoner > null Problemo. X starte ich nur über startx, weil ich zu 90 Prozent > auf der Console arbeite. mh, ich wechsel sehr oft zwischen x und console, da irssi und mutt auf console laufen, und ich dort meißtens arbeite, mozilla etc. aber in x. bye jonas
signature.asc
Description: Digital signature