Hallo Liste,

bin grad von 2.4 auf 2.6 umgestiegen und hab ein Problem mit meinem
Brenner. 

brw-rw----    1 root     cdrom     22,  64 2002-03-14 22:51 /dev/hdd

groups ergibt:
mlunter disk mail dialout cdrom floppy audio dip src video staff
games lpadmin

Brennen als root ist mÃglich, als user nicht.

mkisofs -J -R Projects | cdrecord -dao dev=ATAPI:0,1,0 -

scsidev: 'ATAPI:0,1,0'
devname: 'ATAPI'
scsibus: 0 target: 1 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be
unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-1300A '
Revision       : '1.0B'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
cdrecord: This version of cdrecord does not include DVD-R/DVD-RW
support code.
cdrecord: See /usr/share/doc/cdrecord/README.DVD.Debian for details
on DVD support.
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes:
                ^^^^^^^^^^^^^^^^^
                                Hier mÃsste etwa TAO PACKET SAO SAO/R96R RAW/R96R 
stehen.
cdrecord: Drive does not support TAO recording.
cdrecord: Illegal write mode for this drive.


Wenn ich eine CD-RW lÃschen will, meldet er dies:

<--schnipp-->
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes:
cdrecord: Operation not permitted. prevent/allow medium removal:
scsi sendcmd: no error
CDB:  1E 00 00 00 01 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 40s
cdrecord: Cannot init drive.
<--schnapp-->

Irgendwo liegt ein Rechteproblem vor, ich kanns nur nicht entdecken.
Weià jemand Rat?

Mfg,
Michael


-- 
Liebe Zivildienstleistende. TruppenÃbungsplatz. Kennt Ihr! Genau. HeiÃt
bei Euch ÅSchwesternwohnheimÅ.
                                -- Harald Schmidt


-- 
Haeufig gestellte Fragen und Antworten (FAQ): 
http://www.de.debian.org/debian-user-german-FAQ/

Zum AUSTRAGEN schicken Sie eine Mail an [EMAIL PROTECTED]
mit dem Subject "unsubscribe". Probleme? Mail an [EMAIL PROTECTED] (engl)

Antwort per Email an