Witam wszystkich, mam problem z odczytem zawartoÅci karty SD podÅÄczanej do czytnika kart SD. Niby wszystko ok, ale nie widzi partycji (ktÃra jest, bo czyta jÄ pod windowsem oraz na pocket pc).
Przydatne info: ----------------------------- linux:/home/bart # fdisk -l /dev/sda Disk /dev/sda: 255 MB, 255066112 bytes 8 heads, 61 sectors/track, 1020 cylinders Units = cylinders of 488 * 512 = 249856 bytes Device Boot Start End Blocks Id System linux:/home/bart # ------------------------------- linux:/home/bart # lsmod|grep scsi scsi_mod 110284 7 osst,usb_storage,sg,st,sr_mod,libata,sd_mod ------------------------------- linux:/home/bart # lsmod|grep usb usb_storage 60352 0 usbserial 29168 0 eagle_usb 121152 0 usbcore 103644 8 usb_storage,usbserial,hid,eagle_usb,ehci_hcd,uhci_hcd scsi_mod 110284 7 osst,usb_storage,sg,st,sr_mod,libata,sd_mod ------------------------------- linux:/home/bart # cat /proc/scsi/scsi Attached devices: Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: Generic Model: USB SD Reader Rev: 2.00 Type: Direct-Access ANSI SCSI revision: 02 ------------------------------- linux:/home/bart # lsusb Bus 004 Device 001: ID 0000:0000 Bus 003 Device 002: ID 04b4:6370 Cypress Semiconductor Corp. Bus 003 Device 001: ID 0000:0000 Bus 002 Device 004: ID 058f:9330 Alcor Micro Corp. Bus 002 Device 002: ID 1110:9021 Analog Devices Canada, Ltd (Allied Telesyn) Bus 002 Device 001: ID 0000:0000 Bus 001 Device 002: ID 099a:800c Bus 001 Device 001: ID 0000:0000 ------------------------------- linux:/home/bart # hwinfo --usb 03: SCSI 100.0: 10600 Disk [Created at block.190] Unique ID: FKGF.CDReZSCiluF SysFS ID: /block/sda SysFS BusID: 1:0:0:0 SysFS Device Link: /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0/host1/1:0:0:0 Hardware Class: disk Model: "Generic USB SD Reader" Vendor: "Generic" Device: "USB SD Reader" Revision: "2.00" Driver: "usb-storage", "sd" Device File: /dev/sda (/dev/sg0) Device Files: /dev/sda, /dev/disk/by-path/usb-AlcorMicro-MassStorageDevice:0:0:0, /dev/disk/by-id/Generic-USB_SD_Reader Device Number: block 8:0-8:15 (char 21:0) Geometry (Logical): CHS 1020/8/61 Size: 498176 sectors a 512 bytes Speed: 1.5 Mbps Config Status: cfg=no, avail=yes, need=no, active=unknown ------------------------------ Na karcie jest FAT16 wiÄc powinien go "mount -t vfat" odczytaÄ. PoniewaÅ nie ma partycji prÃbowaÅem (wg. wskazÃwek z netu) montowaÄ dysk: mount -t vfat /dev/sda /mnt/sd PrÃbowaÅem rÃwnieÅ (w akcie desperacji) -t msdos. RÃwnieÅ leciaÅem po kolei /dev/sda1, /dev/sda2, /dev/sda3, itd. KtoÅ ma pomysÅ jak siÄ zabraÄ do tego? Bartek