czesc
$findchip Found NSC PC87338 Controller at 0x398, DevID=0x0b, Rev. 2 SIR Base 0x2f8, FIR Base 0x2f8 IRQ = 3, DMA = 0 Enabled: yes, Suspended: no UART compatible: yes Half duplex delay = 0 us #modprobe nsc-ircc io=0x398 odpowiedz z dmesg: localhost kernel: nsc-ircc, Found chip at base=0x398 localhost kernel: nsc-ircc, Wrong chip version 08 #modprobe nsc-ircc io=2f8 odpowiedz dmesg: localhost kernel: nsc-ircc, Found chip at base=0x398 localhost kernel: nsc-ircc, driver loaded (Dag Brattli) localhost kernel: nsc_ircc_open(), can't get iobase of 0x2f8 najgorze jest to ze ok pol roku temu bez problemu calosc skonfigurowalem (ifconfig pokazywal mi urzadzenie irda0) tylko ze wowoczas irdy nie potrzebowalem i od tamtej pory nie wkompilowywalem jej obslugi do jadra no a teraz mam problemy... jakies sugestie? michal