To co teraz piszę to z mojego debianka 3.1 na jajku 2.6.8 pod kde i firefox.Uzyskałem połączenie ale nie wiem czy przy następnym restarcie kompa zestawie net przez tego zasranego thomsona. Zabiłem już załadowanego pppd i uruchomiłem skrypt speedtouchconf-2.0-beta2_16-May-2005.tar.gz ze strony http://sourceforge.net/project/showfiles.php?group_id=68502 wraz z firmwarem rev4fw.zip i w końcu zaskoczył po ładnych kilku dniach przestoju. Na dowód dorzucam mój log z tego połączenia
Starting speedtouchconf.sh script Version 2.0-beta2_16-May-2005 śro cze 29 17:57:46 CEST 2005 Called as ./speedtouchconf.sh from /usr/src/sc330/speedtouchconf-2.0-beta2_16-May-2005 Linux chieftec 2.6.8-2-686 #1 Thu May 19 17:53:30 JST 2005 i686 GNU/Linux VPI: 0 VCI: 35 No further user interaction is required. Configuring SpeedTouch Driver... Software Configuration - SUCCESS Building SpeedTouch Driver... Software Build - SUCCESS Installing SpeedTouch Driver... Software Installation - SUCCESS Creating ppp files in /etc/ppp -rw------- 1 root root 170 2005-06-29 17:58 /etc/ppp/chap-secrets -rw-r--r-- 1 root root 156 2005-06-29 17:58 /etc/ppp/options -rw------- 1 root root 169 2005-06-29 17:58 /etc/ppp/pap-secrets -rw-r--r-- 1 root dip 329 2005-06-29 17:58 /etc/ppp/peers/adsl Modprobe found the following: LOAD_NHDLC=1 LOAD_PPP_GENERIC=1 LOAD_PPP_SYNCTTY=1 LOAD_USBCORE=1 LOAD_USBINTERFACE=0 LOAD_PPP_GENERIC=0; modprobe -q ppp_generic && LOAD_PPP_GENERIC=1; LOAD_PPP_SYNCTTY=0; modprobe -q ppp_synctty && LOAD_PPP_SYNCTTY=1; LOAD_NHDLC=0; modprobe -q n_hdlc && LOAD_NHDLC=1; LOAD_USBCORE=0; modprobe -q usbcore && LOAD_USBCORE=1; LOAD_USBINTERFACE="0"; LOAD_USBINTERFACE=1; set | grep LOAD >>$LOGFILE; echo "# LOAD_ directives should be 1 for modules, 0 if built into the kernel" >>$CONF; echo "LOAD_PPP_GENERIC=${LOAD_PPP_GENERIC}" >>$CONF; echo "LOAD_PPP_SYNCTTY=${LOAD_PPP_SYNCTTY}" >>$CONF; echo "LOAD_USBCORE=${LOAD_USBCORE}" >>$CONF; echo "LOAD_USBINTERFACE=${LOAD_USBINTERFACE}" >>$CONF; echo "LOAD_NHDLC=${LOAD_NHDLC}" >>$CONF; LOAD_USBCORE=1 LOAD_USBINTERFACE=0 USB_INTERFACE= USB_TYPE=UHCI USB_TYPE=`get_usb`; if [ -z "${USB_TYPE}" ]; then echo "No USB Bus found or no Speed Touch modem found" | tee -a $LOGFILE; LOAD_USBCORE=0; modprobe -q usbcore && LOAD_USBCORE=1; USB_INTERFACE=""; LOAD_USBINTERFACE="0"; if [ "$USB_TYPE" == "UHCI" ]; then modprobe -q usb-uhci 2>/dev/null && USB_INTERFACE=usb-uhci; modprobe -q uhci-hdc 2>/dev/null && USB_INTERFACE=uhci-hdc; modprobe -q uhci 2>/dev/null && USB_INTERFACE=uhci; if [ "$USB_TYPE" == "EHCI" ]; then modprobe -q usb-ehci 2>/dev/null && USB_INTERFACE=usb-ehci; modprobe -q ehci-hdc 2>/dev/null && USB_INTERFACE=ehci-hdc; modprobe -q ehci 2>/dev/null && USB_INTERFACE=ehci; if [ "$USB_TYPE" == "OHCI" ]; then modprobe -q usb-ohci 2>/dev/null && USB_INTERFACE=usb-ohci; modprobe -q ohci-hdc 2>/dev/null && USB_INTERFACE=ohci-hdc; modprobe -q ohci 2>/dev/null && USB_INTERFACE=ohci; if [ ! -z "$USB_INTERFACE" ]; then LOAD_USBINTERFACE=1; set | grep USB >>$LOGFILE; add_line "usb-interface" "alias usb-interface $USB_INTERFACE" $MODCONF $MODCONFLOCAL USB_TYPE=$bus; echo $USB_TYPE; echo "LOAD_USBCORE=${LOAD_USBCORE}" >>$CONF; echo "LOAD_USBINTERFACE=${LOAD_USBINTERFACE}" >>$CONF; echo "# USB Interface - UHCI / OHCI / EHCI" >>$CONF; echo "DEFAULT_USBINTERFACE=\"${USB_INTERFACE}\"" >>$CONF; End of Modprobe info śro cze 29 17:58:40 CEST 2005 The modem lights should start flashing for approx. 60 seconds... śro cze 29 17:59:16 CEST 2005 The lights should both be solid green now. ... Checking /usr/share/speedtouch and /etc/speedtouch ... /usr/share/speedtouch: ls: /usr/share/speedtouch: Nie ma takiego pliku ani katalogu /etc/speedtouch: ... Done checking for kernel-driver microcodes Running : /usr/sbin/pppd call adsl pppd return code 0 Called pppd - you should see some messages about IP addresses now... Jun 29 17:59:26 localhost pppd[7237]: pppd 2.4.3 started by root, uid 0 Jun 29 17:59:26 localhost pppd[7237]: Using interface ppp0 Jun 29 17:59:26 localhost pppd[7237]: Connect: ppp0 <--> /dev/pts/1 Jun 29 17:59:33 localhost pppd[7237]: CHAP authentication succeeded Jun 29 17:59:33 localhost pppd[7237]: local IP address 83.22.135.223 Jun 29 17:59:33 localhost pppd[7237]: remote IP address 213.25.2.216 Jun 29 17:59:33 localhost pppd[7237]: primary DNS address 194.204.152.34 Jun 29 17:59:33 localhost pppd[7237]: secondary DNS address 217.98.63.164 --- ifconfig -a output --- eth0 Link encap:Ethernet HWaddr 00:C1:26:07:2B:CA inet addr:192.168.100.3 Bcast:192.168.100.255 Mask:255.255.255.0 inet6 addr: fe80::2c1:26ff:fe07:2bca/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:137 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:12005 (11.7 KiB) Interrupt:11 Base address:0xc000
lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:216 errors:0 dropped:0 overruns:0 frame:0 TX packets:216 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:25578 (24.9 KiB) TX bytes:25578 (24.9 KiB) ppp0 Link encap:Point-to-Point Protocol inet addr:83.22.135.223 P-t-P:213.25.2.216 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:29 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:2362 (2.3 KiB) TX bytes:1642 (1.6 KiB) sit0 Link encap:IPv6-in-IPv4 NOARP MTU:1480 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) --- netstat -rn output --- Kernel IP routing table Destination Gateway Genmask Flags MSS Window irtt Iface 213.25.2.216 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.100.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 213.25.2.216 0.0.0.0 UG 0 0 0 ppp0 Looks like we're online... Hey look, I can see the Net from here! --- dns --- -rw-r--r-- 1 root root 51 2005-06-29 17:59 /etc/ppp/resolv.conf lrwxrwxrwx 1 root root 20 2005-06-28 18:30 /etc/resolv.conf -> /etc/ppp/resolv.conf --- /etc/resolv.conf --- nameserver 194.204.152.34 nameserver 217.98.63.164 --- /etc/ppp/resolv.conf --- nameserver 194.204.152.34 nameserver 217.98.63.164 --- end of diags --- Configuration finished. To automatically dial-in when the PC boots up : update-rc.d speedtouch start 90 2 3 4 5 . stop 10 0 1 6 . init command succeeded