W dniu 10 listopada 2010 16:38 użytkownik Stanisław Findeisen <s...@eisenbits.com> napisał: > Ja właśnie mam Huawei E1820 który ma ZeroCD, i o ile dobrze to rozumiem > to to działa tak że się na USB bus pojawia raz jako storage device a raz > jako GSM modem (czy jakoś tak).
U mnie pojawiają się wszystkie trzy urządzenia (dwa porty szeregowe i CD-ROM) od razu i bez konieczności jakiegokolwiek przełączania. Wygląda to tak: kernel: [81288.544272] pcmcia_socket pcmcia_socket0: pccard: CardBus card inserted into slot 0 kernel: [81288.544417] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot kernel: [81288.544428] pci 0000:02:00.0: PME# disabled kernel: [81288.544556] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot kernel: [81288.544566] pci 0000:02:00.1: PME# disabled kernel: [81289.105154] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver kernel: [81289.105162] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after kernel: [81289.105241] ehci_hcd 0000:02:00.1: enabling device (0000 -> 0002) kernel: [81289.105266] ehci_hcd 0000:02:00.1: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 kernel: [81289.105345] ehci_hcd 0000:02:00.1: EHCI Host Controller kernel: [81289.105384] ehci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 4 kernel: [81289.118912] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver kernel: [81289.128217] ehci_hcd 0000:02:00.1: irq 11, io mem 0xd4001000 kernel: [81289.140166] ehci_hcd 0000:02:00.1: USB 2.0 started, EHCI 1.00 kernel: [81289.140241] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 kernel: [81289.140247] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kernel: [81289.140253] usb usb4: Product: EHCI Host Controller kernel: [81289.140257] usb usb4: Manufacturer: Linux 2.6.32-bpo.3-686 ehci_hcd kernel: [81289.140262] usb usb4: SerialNumber: 0000:02:00.1 kernel: [81289.140493] usb usb4: configuration #1 chosen from 1 choice kernel: [81289.140568] hub 4-0:1.0: USB hub found kernel: [81289.140591] hub 4-0:1.0: 3 ports detected kernel: [81289.145512] ohci_hcd 0000:02:00.0: enabling device (0000 -> 0002) kernel: [81289.145535] ohci_hcd 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11 kernel: [81289.145769] ohci_hcd 0000:02:00.0: OHCI Host Controller kernel: [81289.145802] ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 5 kernel: [81289.145851] ohci_hcd 0000:02:00.0: irq 11, io mem 0xd4000000 kernel: [81289.202241] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 kernel: [81289.202252] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 kernel: [81289.202257] usb usb5: Product: OHCI Host Controller kernel: [81289.202262] usb usb5: Manufacturer: Linux 2.6.32-bpo.3-686 ohci_hcd kernel: [81289.202267] usb usb5: SerialNumber: 0000:02:00.0 kernel: [81289.203865] usb usb5: configuration #1 chosen from 1 choice kernel: [81289.205843] hub 5-0:1.0: USB hub found kernel: [81289.205882] hub 5-0:1.0: 3 ports detected kernel: [81293.032258] usb 5-1: new full speed USB device using ohci_hcd and address 2 kernel: [81293.244575] usb 5-1: New USB device found, idVendor=12d1, idProduct=1003 kernel: [81293.244586] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 kernel: [81293.244595] usb 5-1: Product: HUAWEI Mobile kernel: [81293.244601] usb 5-1: Manufacturer: HUAWEI Technologies kernel: [81293.246643] usb 5-1: configuration #1 chosen from 1 choice kernel: [81293.264243] scsi2 : SCSI emulation for USB Mass Storage devices kernel: [81293.267047] usb 5-1: USB disconnect, address 2 kernel: [81294.808261] usb 5-1: new full speed USB device using ohci_hcd and address 3 kernel: [81295.020417] usb 5-1: New USB device found, idVendor=12d1, idProduct=1003 kernel: [81295.020427] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 kernel: [81295.020436] usb 5-1: Product: HUAWEI Mobile kernel: [81295.020442] usb 5-1: Manufacturer: HUAWEI Technologies kernel: [81295.022470] usb 5-1: configuration #1 chosen from 1 choice kernel: [81295.052254] scsi5 : SCSI emulation for USB Mass Storage devices kernel: [81295.674371] usbcore: registered new interface driver usbserial kernel: [81295.675545] USB Serial support registered for generic kernel: [81295.679202] usbcore: registered new interface driver usbserial_generic kernel: [81295.679211] usbserial: USB Serial Driver core kernel: [81295.709884] USB Serial support registered for GSM modem (1-port) kernel: [81295.711135] option 5-1:1.0: GSM modem (1-port) converter detected kernel: [81295.713873] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB0 kernel: [81295.713919] option 5-1:1.1: GSM modem (1-port) converter detected kernel: [81295.715447] usb 5-1: GSM modem (1-port) converter now attached to ttyUSB1 kernel: [81295.715499] usbcore: registered new interface driver option kernel: [81295.715504] option: v0.7.2:USB Driver for GSM modems kernel: [81300.060893] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 kernel: [81300.354948] sr0: scsi-1 drive kernel: [81300.354957] Uniform CD-ROM driver Revision: 3.20 kernel: [81300.534552] sr 5:0:0:0: Attached scsi generic sg0 type 5 > Używasz usb-modeswitch? Nie wiedziałem nawet, że takie coś istnieje. Sprawdziłem. Nie mam tego zainstalowanego. Zresztą paczka usb-modeswitch nie istnieje w Lennym. Aktualnie jest dostępna tylko dla Squeeze i Sid. -- Krzysztof Burghardt <krzysz...@burghardt.pl> http://www.burghardt.pl/ -- To UNSUBSCRIBE, email to debian-user-polish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/aanlkti=xn4fx3icxqjsar=bp2gc+ttjafuiqnqede...@mail.gmail.com
