Pois é, estou fazendo teste com o debian "etch" já por algumas semanas e resolví nesse final de semana colocar um servidor de arquivos (samba) em produção.
A única coisa que eu não havia testado ainda era adcionar mais de uma placa de rede, porque isso nunca havia me dado problema antes, no maximo acrescentar um modulo em /etc/modules. Pois então, não importa o que eu faça o debian "etch" só reconhece uma placa de rede. Se deixo a NIC onboard + 1 NIC VIA, só a ONBOARD é reconhecida. Se deixo a NIC onboard + 1 NIC Reaktek (2 modelos diferentes) novamente sempre a onboard é reconhecida e a outra não. Se desabilito a NIC onboard e mistura duas NICs diferentes ou iguais VIA+RHINE+RTL8139 ou qualquer outras (foram varias diferentes), somente uma é reconhecida. E não é problema de driver já que sozinha todas elas são reconhecidas e configuradas automatica. Alguem já passou por algum problema assim ? Por enquanto criei um alias para a placa de rede para enganar o sistema DNS e deixar que algumas aplicacoes via terminal ssh funcionem, porém não pode ser uma solução definitiva porque o trafego de rede ficará bem intenso e só uma NIC extra para aliviar. Eis o meu sistema : PLACA MAE ASUS P5PE-VM (pentium D dualcore) + 512RAM Linux 2.6.18-3-686 #1 SMP Mon Dec 4 16:41:14 UTC 2006 i686 e minha configuração de rede, depois de várias combinações diferentes está assim : $cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 allow-hotplug eth0 iface eth0 inet static address 192.168.1.3 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.254 #auto eth0:0 # iface eth0:0 inet static # address 192.168.1.2 # netmask 255.255.255.0 # network 192.168.1.0 # broadcast 192.168.1.255 #auto eth1 allow-hotplug eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 o dmesg não tem nada de especial : Linux version 2.6.18-3-686 (Debian 2.6.18-7) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001f7b0000 (usable) BIOS-e820: 000000001f7b0000 - 000000001f7c0000 (ACPI data) BIOS-e820: 000000001f7c0000 - 000000001f7f0000 (ACPI NVS) BIOS-e820: 000000001f7f0000 - 000000001f800000 (reserved) BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 503MB LOWMEM available. found SMP MP-table at 000ff780 On node 0 totalpages: 128944 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 124848 pages, LIFO batch:31 DMI 2.3 present. ACPI: RSDP (v002 ACPIAM ) @ 0x000faf80 ACPI: XSDT (v001 A M I OEMXSDT 0x07000613 MSFT 0x00000097) @ 0x1f7b0100 ACPI: FADT (v003 A M I OEMFACP 0x07000613 MSFT 0x00000097) @ 0x1f7b0290 ACPI: MADT (v001 A M I OEMAPIC 0x07000613 MSFT 0x00000097) @ 0x1f7b0390 ACPI: OEMB (v001 A M I OEMBIOS 0x07000613 MSFT 0x00000097) @ 0x1f7c0040 ACPI: DSDT (v001 A0551 A0551036 0x00000036 INTL 0x02002026) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:4 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 1f800000:e0380000) Detected 2793.136 MHz processor. Built 1 zonelists. Total pages: 128944 Kernel command line: root=/dev/sda2 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 503608k/515776k available (1543k kernel code, 11504k reserved, 574k data, 196k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 5590.31 BogoMIPS (lpj=11180633) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000641d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5586.48 BogoMIPS (lpj=11172965) CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000641d 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20000000 00000000 00000180 0000641d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07 Total of 2 processors activated (11176.79 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=788 checking if image is initramfs... it is Freeing initrd memory: 4364k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:00:02.0 PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO PCI quirk: region 0480-04bf claimed by ICH4 GPIO PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:0c: ioport range 0x290-0x297 has been reserved PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0 PCI: Bridge: 0000:00:1e.0 IO window: e000-efff MEM window: fbf00000-fbffffff PREFETCH window: 20000000-200fffff PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 8192 (order: 4, 65536 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered audit: initializing netlink socket (disabled) audit(1172379250.020:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. input: AT Translated Set 2 keyboard as /class/input/input0 ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c147d89c), AE_BAD_HEADER ACPI: Processor [CPU1] (supports 8 throttling states) ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node c147d7fc), AE_BAD_HEADER ACPI: Processor [CPU2] (supports 8 throttling states) ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x4 usbcore: registered new driver usbfs usbcore: registered new driver hub SCSI subsystem initialized libata version 2.00 loaded. USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000c400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000c800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000d000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000d400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfbe7bc00 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ata_piix 0000:00:1f.2: version 2.00 ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:1f.2 to 64 ata1: SATA max UDMA/133 cmd 0xC000 ctl 0xB802 bmdma 0xA800 irq 185 ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 185 scsi0 : ata_piix ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata1.00: ata1: dev 0 multi count 16 ata1.00: configured for UDMA/133 scsi1 : ata_piix ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32) ata2.00: ata2: dev 0 multi count 16 ata2.00: configured for UDMA/133 Vendor: ATA Model: WDC WD2500JS-22N Rev: 10.0 Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: ST3250823AS Rev: 3.03 Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI Interrupt 0000:01:0d.0[A] -> GSI 23 (level, low) -> IRQ 193 skge 1.6 addr 0xfbff8000 irq 193 chip Yukon-Lite rev 9 skge eth0: addr 00:17:31:64:ab:77 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:01:0b.0[A] -> GSI 22 (level, low) -> IRQ 201 eth1: RTL8169s/8110s at 0xe001ec00, 00:08:54:13:dc:c5, IRQ 201 ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185 ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... Probing IDE interface ide1... hdc: GCR-8523B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) sda: Write Protect is off sda: Mode Sense: 00 3a 00 00 SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) sdb: Write Protect is off sdb: Mode Sense: 00 3a 00 00 SCSI device sdb: drive cache: write back sdb:<6>hdc: ATAPI 52X CD-ROM drive, 128kB Cache, DMA Uniform CD-ROM driver Revision: 3.20 sdb1 sdb2 sdb3 sdb4 sd 1:0:0:0: Attached scsi disk sdb Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected an Intel 865 Chipset. agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xf0000000 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 input: PC Speaker as /class/input/input1 Floppy drive(s): fd0 is 1.44M intel_rng: FWH not detected FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] Real Time Clock Driver v1.12ac input: ImPS/2 Generic Wheel Mouse as /class/input/input2 ts: Compaq touchscreen protocol output Adding 979924k swap on /dev/sda1. Priority:-1 extents:1 across:979924k EXT3 FS on sda2, internal journal loop: loaded (max 8 devices) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on sda3, internal journal EXT3-fs: mounted filesystem with ordered data mode. skge eth0: enabling interface ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver NET: Registered protocol family 10 lo: Disabled Privacy Extensions ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period skge eth0: Link is up at 100 Mbps, full duplex, flow control tx and rx ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present