eth0 Encapsulamento do Link: Ethernet Endereço de HW
00:0D:88:6F:28:14
inet end.: 10.1.0.100 Bcast:10.1.255.255 Masc:255.255.0.0
endereço inet6: fe80::20d:88ff:fe6f:2814/64 Escopo:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 MÃ(c)trica:1
pacotes RX:793 erros:0 descartados:0 excesso:0 quadro:0
Pacotes TX:131 erros:0 descartados:0 excesso:0 portadora:0
colisões:0 txqueuelen:1000
RX bytes:171214 (167.2 KiB) TX bytes:21341 (20.8 KiB)
IRQ:21
Ta ai o ifconfig
O dhcp.conf é o mesmo que funcionava no debian sarg.
Agora jogando ele no etch e ubuntum ta dando isso.
Att
Gustavo
Em 09/07/07, Alex Bruno <[EMAIL PROTECTED]> escreveu:
Cola o ifconfig aqui para nós te explicarmos melhor. Por padrão vem
configurado a eh0. Coloca a eth1 e vê se funfa.
2007/7/9, Gustavo Carvalho < [EMAIL PROTECTED]>:
>
> Galera,
>
> to com esse problema quando dou start no dhcp.
>
> Internet Systems Consortium DHCP Server V3.0.4
> Jul 9 07:33:22 dhcpd: Copyright 2004-2006 Internet Systems Consortium.
> Jul 9 07:33:22 dhcpd: All rights reserved.
> Jul 9 07:33:22 dhcpd: For info, please visit
> http://www.isc.org/sw/dhcp/
> Jul 9 07:33:24 dhcpd: Internet Systems Consortium DHCP Server V3.0.4
> Jul 9 07:33:24 dhcpd: Copyright 2004-2006 Internet Systems Consortium.
> Jul 9 07:33:24 dhcpd: All rights reserved.
> Jul 9 07:33:24 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/
>
> Jul 9 07:33:24 dhcpd: Wrote 0 leases to leases file.
> Jul 9 07:33:24 dhcpd:
> Jul 9 07:33:24 dhcpd: No subnet declaration for eth0 (10.1.0.100).
> Jul 9 07:33:24 dhcpd: ** Ignoring requests on eth0. If this is not
> what
> Jul 9 07:33:24 dhcpd: you want, please write a subnet declaration
> Jul 9 07:33:24 dhcpd: in your dhcpd.conf file for the network
> segment
> Jul 9 07:33:24 dhcpd: to which interface eth0 is attached. **
> Jul 9 07:33:24 dhcpd:
> Jul 9 07:33:24 dhcpd:
> Jul 9 07:33:24 dhcpd: Not configured to listen on any interfaces
>
> Alguem pode me ajudar?
>
> Att
> Gustavo
>
