Bom dia, Tenho um desktop e minha placa wireless é uma D-Link DWL-G510 eu estou usando o Madwifi só que estou em dúvida se foi instalado com sucesso. Eu executei o comando dmesg e salvei em um txt.
Desde de já obrigado pela ajuda. -- Alberto Guimarães Viana msn: [EMAIL PROTECTED] e-mail: [EMAIL PROTECTED] "Mais importante que aprender é nunca perder a capacidade de aprender" (Leonardo Boff – Teólogo)
Linux version 2.6.18-5-686 (Debian 2.6.18.dfsg.1-13etch3) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Wed Sep 26 17:54:59 UTC 2007 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f000 (usable) BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007fee0000 (usable) BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS) BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data) BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 1150MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f5b40 On node 0 totalpages: 524000 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 294624 pages, LIFO batch:31 DMI 2.4 present. ACPI: RSDP (v002 AWARD ) @ 0x000f75e0 ACPI: XSDT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7fee30c0 ACPI: FADT (v003 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7feeb080 ACPI: HPET (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000098) @ 0x7feeb2c0 ACPI: MCFG (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7feeb340 ACPI: MADT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7feeb1c0 ACPI: SSDT (v001 AWARD ASUSACPI 0x42302e31 AWRD 0x00000000) @ 0x7feeb8a0 ACPI: DSDT (v001 AWARD ASUSACPI 0x00001000 MSFT 0x03000000) @ 0x00000000 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:6 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 4, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x05] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 5, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x11068201 base: 0xfe800000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000) Detected 3199.932 MHz processor. Built 1 zonelists. Total pages: 524000 Kernel command line: root=/dev/hda3 ro irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) mapped IOAPIC to ffffb000 (fecc0000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 16384 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 2070096k/2096000k available (1541k kernel code, 24692k reserved, 576k data, 196k init, 1178496k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. hpet0: at MMIO 0xfe800000 (virtual 0xf8800000), IRQs 2, 8, 0 hpet0: 3 32-bit timers, 14318180 Hz Using HPET for base-timer Calibrating delay using timer specific routine.. 6430.64 BogoMIPS (lpj=12861296) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e49d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20060707 CPU0: Intel(R) Pentium(R) D CPU 3.20GHz stepping 05 SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 Initializing CPU#1 Calibrating delay using timer specific routine.. 6399.55 BogoMIPS (lpj=12799118) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 CPU: After vendor identify, caps: bfebfbff 20100000 00000000 00000000 0000e49d 00000000 00000001 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00000180 0000e49d 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (24) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) D CPU 3.20GHz stepping 05 Total of 2 processors activated (12830.20 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs migration_cost=1575 checking if image is initramfs... it is Freeing initrd memory: 4783k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:02:00.0 PCI: Transparent bridge - 0000:00:13.1 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEXG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Root Bridge [PCI1] (0000:80) PCI: Probing PCI hardware (bus 80) ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 16 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:01: ioport range 0x400-0x47f could not be reserved pnp: 00:01: ioport range 0x500-0x50f has been reserved PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: dc000000-deffffff PREFETCH window: c0000000-cfffffff PCI: Bridge: 0000:00:03.0 IO window: b000-cfff MEM window: dfe00000-dfefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:13.1 IO window: a000-afff MEM window: dfd00000-dfdfffff PREFETCH window: 80000000-800fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:02.0 to 64 ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 31 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:13.1 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered audit: initializing netlink socket (disabled) audit(1191312001.176:1): initialized highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] Allocate Port Service[0000:00:02.0:pcie02] Allocate Port Service[0000:00:02.0:pcie03] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] Allocate Port Service[0000:00:03.0:pcie02] Allocate Port Service[0000:00:03.0:pcie03] isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfe800000 is busy Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Starting balanced_irq Using IPI No-Shortcut mode ACPI: (supports S0 S1 S3 S4 S5) Freeing unused kernel memory: 196k freed Time: tsc clocksource has been installed. ACPI: Fan [FAN] (on) ACPI (exconfig-0455): Dynamic SSDT Load - OemId [AWARD ] OemTableId [ASUSACPI] [20060707] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [AWARD ] OemTableId [ASUSACPI] [20060707] ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x2 ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707] ACPI: Getting cpuindex for acpiid 0x3 ACPI: Thermal Zone [THRM] (40 C) input: AT Translated Set 2 keyboard as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Unknown: IDE controller at PCI slot 0000:00:0f.0 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 209 Unknown: chipset revision 128 Unknown: 100% native mode on irq 209 ide0: BM-DMA at 0xec00-0xec07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xec08-0xec0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 hda: SAMSUNG HD160JJ, ATA DISK drive ide0 at 0xfc00-0xfc07,0xf802 on irq 209 Probing IDE interface ide1... Unknown: IDE controller at PCI slot 0000:00:0f.1 PCI: VIA IRQ fixup for 0000:00:0f.1, from 255 to 0 Unknown: chipset revision 7 Unknown: not 100% native mode: will probe irqs later ide2: BM-DMA at 0xe400-0xe407, BIOS settings: hde:DMA, hdf:pio ide3: BM-DMA at 0xe408-0xe40f, BIOS settings: hdg:pio, hdh:pio Probing IDE interface ide2... hde: TSSTcorpCD/DVDW SH-S182F, ATAPI CD/DVD-ROM drive ide2 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide3... Unknown: IDE controller at PCI slot 0000:03:00.1 PCI: Enabling device 0000:03:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 29 (level, low) -> IRQ 217 Unknown: chipset revision 3 Unknown: 100% native mode on irq 217 PCI: Setting latency timer of device 0000:03:00.1 to 64 ide4: BM-DMA at 0xbc00-0xbc07, BIOS settings: hdi:pio, hdj:pio ide5: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdk:pio, hdl:pio Probing IDE interface ide4... Probing IDE interface ide5... r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:04:07.0[A] -> GSI 20 (level, low) -> IRQ 225 eth0: RTL8169sc/8110sc at 0xf8888000, 00:1a:92:94:ad:bf, IRQ 225 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 225 PCI: VIA IRQ fixup for 0000:00:10.0, from 255 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 225, io base 0x0000e000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hda: max request size: 512KiB hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63 hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 hda7 > hda3 ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 233 PCI: VIA IRQ fixup for 0000:00:10.1, from 255 to 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 233, io base 0x0000dc00 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.2, from 255 to 1 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 209, io base 0x0000d800 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 50 PCI: VIA IRQ fixup for 0000:00:10.3, from 255 to 2 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 50, io base 0x0000d400 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 209 PCI: VIA IRQ fixup for 0000:00:10.4, from 255 to 1 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 209, io mem 0xdffff000 ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected JMB361: IDE controller at PCI slot 0000:03:00.0 ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 28 (level, low) -> IRQ 58 JMB361: chipset revision 3 JMB361: 100% native mode on irq 58 JMB361: port 0x01f0 already claimed by ide2 JMB361: port 0x0170 already claimed by ide3 JMB361: neither IDE port enabled (BIOS) SCSI subsystem initialized libata version 2.00 loaded. hde: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 Attempting manual resume ReiserFS: hda3: found reiserfs format "3.6" with standard journal ReiserFS: hda3: using ordered data mode ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda3: checking transaction log (hda3) ReiserFS: hda3: Using r5 hash to sort names usb 2-1: new low speed USB device using uhci_hcd and address 2 usb 2-1: configuration #1 chosen from 1 choice pci_hotplug: PCI Hot Plug PCI Core version: 0.5 usbcore: registered new driver hiddev input: USB Mouse as /class/input/input1 input: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:10.1-1 usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver input: PC Speaker as /class/input/input2 Real Time Clock Driver v1.12ac parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Floppy drive(s): fd0 is 1.44M ts: Compaq touchscreen protocol output FDC 0 is a post-1991 82077 ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 66 PCI: Setting latency timer of device 0000:80:01.0 to 64 hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... Adding 690752k swap on /dev/hda6. Priority:-1 extents:1 across:690752k loop: loaded (max 8 devices) ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) wlan: 0.8.4.2 (0.9.3) ath_rate_sample: 1.2 (0.9.3) ath_pci: 0.9.4.5 (0.9.3) device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: [EMAIL PROTECTED] ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names Linux agpgart interface v0.101 (c) Dave Jones r8169: eth0: link down ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] lp0: using parport0 (interrupt-driven). ppdev: user-space parallel port driver r8169: eth0: link up NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. r8169: eth0: link down r8169: eth0: link up ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: no IPv6 routers present hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. r8169: eth0: link up eth0: no IPv6 routers present r8169: eth0: link down r8169: eth0: link up eth0: no IPv6 routers present hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hda-intel: Invalid position buffer, using LPIB read method instead. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: status error: status=0x58 { DriveReady SeekComplete DataRequest } ide: failed opcode was: unknown hde: drive not ready for command hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. hde: cdrom_pc_intr: The drive appears confused (ireason = 0x01). Trying to recover by ending request. r8169: eth0: link up eth0: no IPv6 routers present