Olá,
a saída do dmesg está em anexo ... na parte do agpgart aparece: agpgart: Maximum main memory to use for agp memory: 93M agpgart: Detected an Intel i810 E Chipset. agpgart: AGP aperture is 64M @ 0xf8000000 Edson, está bem parecido com o seu ... exceto a quantidade de memória ... e aí ?? Fernando, com isto imagino que módulo esteja instalado, certo ?? Um abraço, Nivaldo "Edson Y. Fugio" wrote: > Nivaldo Antônio Portela de Vasconcelos wrote: > > logo quando comecei usar linux (Debian) usava o wvdial como programa de > > conexão > > ppp ... eu só conseguia usar como root por conta das permissões de > > dispositivos, > > arquivos e programas... aí, tentei como root mudar as permissões ... > > funcionava > > ... quando eu rebootava a máquina ... as permissões tinham sido repostas ... > > parece que existe um processo de inicialização de permissões pradrão de > > pocote > > ou coisa parecida no momento de boot ... > > > > Considerando que consegui usar o X uma vez ... e quando rebootei nãi mais > > ... > > imagino algo parecido com aquela inicialização .... não de permissões pq. > > estou > > tentando como root .... é só uma idéia de desesperado !! > > Aquele erro é do driver agpgart, veja se o dmesg retorna isto: > agpgart: Maximum main memory to use for agp memory: 93M > agpgart: Detected an Intel i810 DC100 Chipset. > agpgart: detected 4MB dedicated video ram. > agpgart: AGP aperture is 64M @ 0xf8000000 > > Se não tiver nada parecido use "modprobe agpgart". > Quanto ao seu problema de permissões o correto é vc incluir seu login > nos grupos corretos, eu incluo o meu no dialout, lp, audio, dip; e > consigo usar o pon sem ser root. > > []'s > Edson
Linux version 2.2.18 ([EMAIL PROTECTED]) (gcc version 2.7.2.3) #1 Thu Dec 21 21:13:10 EST 2000 Detected 735014 kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1468.00 BogoMIPS Memory: 125996k/129920k available (1728k kernel code, 412k reserved, 1632k data, 152k init) Dentry hash table entries: 16384 (order 5, 128k) Buffer cache hash table entries: 131072 (order 7, 512k) Page cache hash table entries: 32768 (order 5, 128k) VFS: Diskquotas version dquot_6.4.0 initialized Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. 256K L2 cache (8 way) CPU: L2 Cache: 256K CPU: Intel Pentium III (Coppermine) stepping 06 Checking 386/387 coupling... OK, FPU using exception 16 error reporting. Checking 'hlt' instruction... OK. Checking for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS revision 2.10 entry at 0xfd7ec PCI: Using configuration type 1 PCI: Probing PCI hardware Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP TCP: Hash tables configured (ehash 131072 bhash 65536) Starting kswapd v 1.5 Detected PS/2 Mouse Port. pty: 256 Unix98 ptys configured Real Time Clock Driver v1.09 RAM disk driver initialized: 16 RAM disks of 4096K size loop: registered device at major 7 PCI_IDE: unknown IDE controller on PCI bus 00 device f9, VID=8086, DID=2411 PCI_IDE: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:pio hda: Maxtor 31024H1, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: Maxtor 31024H1, 9641MB w/2048kB Cache, CHS=1229/255/63 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8 scsi: <fdomain> Detection failed (no card) NCR53c406a: no available ports found sym53c416.c: Version 1.0.0 Failed initialization of WD-7000 SCSI card! IBM MCA SCSI: Version 3.2 IBM MCA SCSI: No Microchannel-bus present --> Aborting. This machine does not have any IBM MCA-bus or the MCA-Kernel-support is not enabled! megaraid: v1.11 (Aug 23, 2000) aec671x_detect: 3w-xxxx: tw_findcards(): No cards found. scsi : 0 hosts. scsi : detected total. Partition check: hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 > apm: BIOS version 1.2 Flags 0x03 (Driver version 1.13) apm: disabled on user request. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 152k freed NET4: Unix domain sockets 1.0 for Linux NET4.0. Adding Swap: 130748k swap-space (priority -1) IPv4 over IPv4 tunneling driver parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2] parport0: detected irq 7; use procfs to enable interrupt-driven operation. parport_probe: failed parport0: no IEEE-1284 device present. lp0: using parport0 (polling). NET4: Linux IPX 0.38 for NET4.0 IPX Portions Copyright (c) 1995 Caldera, Inc. eepro100.c:v1.09j-t 9/29/99 Donald Becker http://cesdis.gsfc.nasa.gov/linux/drivers/eepro100.html eepro100.c: $Revision: 1.20.2.10 $ 2000/05/31 Modified by Andrey V. Savochkin <[EMAIL PROTECTED]> and others eepro100.c: VA Linux custom, Dragan Stancevic <[EMAIL PROTECTED]> 2000/11/15 eth0: OEM i82557/i82558 10/100 Ethernet, 00:06:29:F7:9B:4F, IRQ 5. Receiver lock-up bug exists -- enabling work-around. Board assembly 729857-005, Physical connectors present: RJ45 Primary interface chip i82555 PHY #1. General self-test: passed. Serial sub-system self-test: passed. Internal registers self-test: passed. ROM checksum self-test: passed (0x04f4518b). Serial driver version 4.27 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 93M agpgart: Detected an Intel i810 E Chipset. agpgart: AGP aperture is 64M @ 0xf8000000