dmesg [ 98.835868] usb 2-1.6: Product: HUAWEI Mobile [ 98.835869] usb 2-1.6: Manufacturer: HUAWEI Technology [ 99.140571] Initializing USB Mass Storage driver... [ 99.140571] scsi5 : SCSI emulation for USB Mass Storage devices [ 99.148277] usb-storage: device found at 4 [ 99.148277] usb-storage: waiting for device to settle before scanning [ 99.140571] scsi6 : SCSI emulation for USB Mass Storage devices [ 99.148277] usb-storage: device found at 4 [ 99.148277] usb-storage: waiting for device to settle before scanning [ 99.140571] usbcore: registered new interface driver usb-storage [ 99.140571] USB Mass Storage support registered. [ 106.973777] usb-storage: device scan complete [ 106.973777] usb-storage: device scan complete [ 106.973777] scsi 6:0:0:0: Direct-Access HUAWEI MMC Storage 2.31 PQ: 0 ANSI: 2 [ 106.975959] scsi 5:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2 [ 106.981741] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 106.981764] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 107.003399] sr1: scsi-1 drive [ 107.003437] sr 5:0:0:0: Attached scsi CD-ROM sr1 [ 107.003460] sr 5:0:0:0: Attached scsi generic sg3 type 5
wvdialconf wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S2 S3 Sorry, no modem was detected! Is it in use by another program? Did you configure it properly with setserial? Please read the FAQ at http://open.nit.ca/wiki/?WvDial If you still have problems, send mail to <wvdial-l...@lists.nit.ca> Se tiver alguma dica te agradeço. att Em 28 de outubro de 2010 23:43, Frederico Martins <fred...@gmail.com>escreveu: > Qual é o resultado do *dmesg* ? > > > -- > Frederico Martins P Junior > Eng.Computação - Inatel ( Instituto Nacional de Telecomunicações ) > > Blog: http://fredim.wordpress.com > Skype: fredericompjr > > > >