On Thu, Jan 20, 2011 at 7:15 PM, Marcelo Laia <marcelol...@gmail.com> wrote:
> Bom, to quase lá .... > > Consegui fazer os dois monitores funcionar com as duas cabeças. Mas, > antes, eu tive que reverter para o gdm, pois eu estava usando o gdm3. > Pergunta: quando o gdm3 substituir o gdm, como fazer? Mas, isso é pra > depois. > > No primeiro terminal, onde estou neste momento, esta funcionando > (quase)tudo! O problema está no teclado. Eu já configurei para usar o > evdev, mas o teclado numerico nao funciona. A seta para cima abre o > printscreen e o printscreen nao abre nada. Alem disso, as setas so > andam com o toque, ou seja, se eu segurar uma seta pressionada por 10 > minutos, ela so anda um passo. Assim, como o teclado numerico nao esta > funcionando, eu uso as setas do teclado numerico. Mas, a cada seta, > tiro 10 printscreen da tela! Sem contar que minha filha quase me > bateu, pois nao aguenta mais tirar print da tela! Quanto ao teclado, > minha suposicao é de que a tecla NumLock é que nao esta funcionado. > Assim, tenho 3 teclas nao funcionando adequadamente: seta para cima > (tira print da tela), printscreen (nao acontece nada) e NumLock (nao > acontece nada ao pressiona-la). > > No segundo terminal, eu consigo ver a tela do GDM para login, o mouse > funciona perfeitamente, mas nao acontece nada quando tento digitar > algo. Ou seja, o teclado nao esta funcionando. > > Eu já testei as configurações desse site > http://en.wikibooks.org/wiki/Multiterminal_with_evdev#xorg.conf > > O meu Xorg.0.log esta assim: > > X.Org X Server 1.7.7 > Release Date: 2010-05-04 > X Protocol Version 11, Revision 0 > Build Operating System: Linux 2.6.32-5-686 i686 Debian > Current Operating System: Linux inael 2.6.32-5-686-bigmem #1 SMP Wed > Jan 12 04:40:25 UTC 2011 i686 > Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686-bigmem > root=UUID=c0183d2f-d659-44cf-a313-615848ec00e2 ro quiet > Build Date: 02 December 2010 01:08:37AM > xorg-server 2:1.7.7-10 (Julien Cristau <jcris...@debian.org>) > Current version of pixman: 0.16.4 > Before reporting problems, check http://wiki.x.org > to make sure that you have the latest version. > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jan 20 19:09:20 2011 > (==) Using config file: "/etc/X11/xorg.conf" > (==) Using system config directory "/usr/share/X11/xorg.conf.d" > (==) ServerLayout "Default Layout" > (**) |-->Screen "Screen0" (0) > (**) | |-->Monitor "Monitor0" > (**) | |-->Device "Device0" > (**) |-->Screen "Screen1" (1) > (**) | |-->Monitor "Monitor1" > (**) | |-->Device "Device1" > (**) |-->Input Device "Keyboard0" > (**) |-->Input Device "Keyboard1" > (**) |-->Input Device "Mouse0" > (**) Option "BlankTime" "0" > (**) Option "StandbyTime" "0" > (**) Option "SuspendTime" "0" > (**) Option "OffTime" "0" > (**) Option "Xinerama" "0" > (**) Option "AllowEmptyInput" "off" > (==) Automatically adding devices > (==) Automatically enabling devices > (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist. > Entry deleted from font path. > (==) FontPath set to: > /usr/share/fonts/X11/misc, > /usr/share/fonts/X11/100dpi/:unscaled, > /usr/share/fonts/X11/75dpi/:unscaled, > /usr/share/fonts/X11/Type1, > /usr/share/fonts/X11/100dpi, > /usr/share/fonts/X11/75dpi, > /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, > built-ins > (==) ModulePath set to "/usr/lib/xorg/modules" > (WW) Duplicate core keyboard devices. Removing core keyboard > attribute from "Keyboard1" > (II) Loader magic: 0x81ec060 > (II) Module ABI versions: > X.Org ANSI C Emulation: 0.4 > X.Org Video Driver: 6.0 > X.Org XInput driver : 7.0 > X.Org Server Extension : 2.0 > (++) using VT number 7 > > (--) PCI:*(0:1:0:0) 10de:0421:0000:0000 nVidia Corporation G86 > [GeForce 8500 GT] rev 161, Mem @ 0xfa000000/16777216, > 0xc0000000/536870912, 0xf8000000/33554432, I/O @ 0x0000bf00/128, BIOS > @ 0x????????/131072 > (II) Open ACPI successful (/var/run/acpid.socket) > (II) "extmod" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dbe" will be loaded by default. > (II) "glx" will be loaded. This was enabled by default and also > specified in the config file. > (II) "record" will be loaded by default. > (II) "dri" will be loaded. This was enabled by default and also > specified in the config file. > (II) "dri2" will be loaded by default. > (II) LoadModule: "glx" > (II) Loading /usr/lib/xorg/modules/extensions/libglx.so > (II) Module glx: vendor="NVIDIA Corporation" > compiled for 4.0.2, module version = 1.0.0 > Module class: X.Org Server Extension > (II) NVIDIA GLX Module 195.36.31 Tue Jun 1 23:22:44 PDT 2010 > (II) Loading extension GLX > (II) LoadModule: "i2c" > (II) Module "i2c" already built-in > (II) LoadModule: "ddc" > (II) Module "ddc" already built-in > (II) LoadModule: "dri" > (II) Loading /usr/lib/xorg/modules/extensions/libdri.so > (II) Module dri: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so > (II) Module extmod: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension SELinux > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "int10" > (II) Loading /usr/lib/xorg/modules/libint10.so > (II) Module int10: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org Video Driver, version 6.0 > (II) LoadModule: "vbe" > (II) Loading /usr/lib/xorg/modules/libvbe.so > (II) Module vbe: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.1.0 > ABI class: X.Org Video Driver, version 6.0 > (II) LoadModule: "evdev" > (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so > (II) Module evdev: vendor="X.Org Foundation" > compiled for 1.7.6.901, module version = 2.3.2 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (II) LoadModule: "dbe" > (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so > (II) Module dbe: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "record" > (II) Loading /usr/lib/xorg/modules/extensions/librecord.so > (II) Module record: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.13.0 > Module class: X.Org Server Extension > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension RECORD > (II) LoadModule: "dri2" > (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so > (II) Module dri2: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.1.0 > ABI class: X.Org Server Extension, version 2.0 > (II) Loading extension DRI2 > (II) LoadModule: "nvidia" > (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so > (II) Module nvidia: vendor="NVIDIA Corporation" > compiled for 4.0.2, module version = 1.0.0 > Module class: X.Org Video Driver > (II) LoadModule: "kbd" > (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so > (II) Module kbd: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.4.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (II) LoadModule: "mouse" > (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so > (II) Module mouse: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.5.0 > Module class: X.Org XInput Driver > ABI class: X.Org XInput driver, version 7.0 > (II) NVIDIA dlloader X Driver 195.36.31 Tue Jun 1 22:21:58 PDT 2010 > (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs > (II) Primary Device is: PCI 01@00:00:0 > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/lib/xorg/modules/libfb.so > (II) Module fb: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "wfb" > (II) LoadModule: "wfb" > (II) Loading /usr/lib/xorg/modules/libwfb.so > (II) Module wfb: vendor="X.Org Foundation" > compiled for 1.7.7, module version = 1.0.0 > ABI class: X.Org ANSI C Emulation, version 0.4 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Module "ramdac" already built-in > (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 > (==) NVIDIA(0): RGB weight 888 > (==) NVIDIA(0): Default visual is TrueColor > (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) > (**) NVIDIA(0): Option "MetaModes" "1280x800_60.00 +0+0; CRT-0: > nvidia-auto-select +0+0" > (**) Jan 20 19:09:22 NVIDIA(0): Enabling RENDER acceleration > (II) Jan 20 19:09:22 NVIDIA(0): Support for GLX with the Damage and > Composite X extensions is > (II) Jan 20 19:09:22 NVIDIA(0): enabled. > (WW) Jan 20 19:09:23 NVIDIA(GPU-0): Unable to read EDID for display device > CRT-1 > (II) Jan 20 19:09:23 NVIDIA(0): NVIDIA GPU GeForce 8500 GT (G86) at > PCI:1:0:0 (GPU-0) > (--) Jan 20 19:09:23 NVIDIA(0): Memory: 524288 kBytes > (--) Jan 20 19:09:23 NVIDIA(0): VideoBIOS: 60.86.34.00.21 > (II) Jan 20 19:09:23 NVIDIA(0): Detected PCI Express Link width: 16X > (--) Jan 20 19:09:23 NVIDIA(0): Interlaced video modes are supported on > this GPU > (--) Jan 20 19:09:23 NVIDIA(0): Connected display device(s) on GeForce > 8500 GT at PCI:1:0:0: > (--) Jan 20 19:09:23 NVIDIA(0): AOC 511Vw (CRT-0) > (--) Jan 20 19:09:23 NVIDIA(0): CRT-1 > (--) Jan 20 19:09:23 NVIDIA(0): AOC 511Vw (CRT-0): 400.0 MHz maximum pixel > clock > (--) Jan 20 19:09:23 NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock > (II) Jan 20 19:09:23 NVIDIA(0): Display Device found referenced in > MetaMode: CRT-0 > (II) Jan 20 19:09:23 NVIDIA(0): Assigned Display Device: CRT-0 > (WW) Jan 20 19:09:23 NVIDIA(0): No valid modes for > "1280x800_60.00+0+0"; removing. > (II) Jan 20 19:09:23 NVIDIA(0): Validated modes: > (II) Jan 20 19:09:23 NVIDIA(0): "CRT-0:nvidia-auto-select+0+0" > (II) Jan 20 19:09:23 NVIDIA(0): Virtual screen size determined to be 1280 x > 800 > (--) Jan 20 19:09:23 NVIDIA(0): DPI set to (95, 92); computed from > "UseEdidDpi" X config > (--) Jan 20 19:09:23 NVIDIA(0): option > (==) Jan 20 19:09:24 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. > (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32 > (==) NVIDIA(1): RGB weight 888 > (==) NVIDIA(1): Default visual is TrueColor > (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0) > (**) NVIDIA(1): Option "MetaModes" "1280x800_60.00 +0+0; CRT-1: > nvidia-auto-select +0+0" > (**) Jan 20 19:09:24 NVIDIA(1): Enabling RENDER acceleration > (II) Jan 20 19:09:24 NVIDIA(1): NVIDIA GPU GeForce 8500 GT (G86) at > PCI:1:0:0 (GPU-0) > (--) Jan 20 19:09:24 NVIDIA(1): Memory: 524288 kBytes > (--) Jan 20 19:09:24 NVIDIA(1): VideoBIOS: 60.86.34.00.21 > (II) Jan 20 19:09:24 NVIDIA(1): Detected PCI Express Link width: 16X > (--) Jan 20 19:09:24 NVIDIA(1): Interlaced video modes are supported on > this GPU > (--) Jan 20 19:09:24 NVIDIA(1): Connected display device(s) on GeForce > 8500 GT at PCI:1:0:0: > (--) Jan 20 19:09:24 NVIDIA(1): AOC 511Vw (CRT-0) > (--) Jan 20 19:09:24 NVIDIA(1): CRT-1 > (--) Jan 20 19:09:24 NVIDIA(1): AOC 511Vw (CRT-0): 400.0 MHz maximum pixel > clock > (--) Jan 20 19:09:24 NVIDIA(1): CRT-1: 400.0 MHz maximum pixel clock > (II) Jan 20 19:09:24 NVIDIA(1): Display Device found referenced in > MetaMode: CRT-1 > (II) Jan 20 19:09:24 NVIDIA(1): Assigned Display Device: CRT-1 > (WW) Jan 20 19:09:24 NVIDIA(1): No valid modes for > "1280x800_60.00+0+0"; removing. > (II) Jan 20 19:09:24 NVIDIA(1): Validated modes: > (II) Jan 20 19:09:24 NVIDIA(1): "CRT-1:nvidia-auto-select+0+0" > (II) Jan 20 19:09:24 NVIDIA(1): Virtual screen size determined to be 1024 x > 768 > (WW) Jan 20 19:09:24 NVIDIA(1): Unable to get display device CRT-1's > EDID; cannot compute DPI > (WW) Jan 20 19:09:24 NVIDIA(1): from CRT-1's EDID. > (==) Jan 20 19:09:24 NVIDIA(1): DPI set to (75, 75); computed from > built-in default > (==) Jan 20 19:09:24 NVIDIA(1): Enabling 32-bit ARGB GLX visuals. > (--) Depth 24 pixmap format is 32 bpp > (II) Jan 20 19:09:24 NVIDIA: Using 768.00 MB of virtual memory for > indirect memory access. > (II) Jan 20 19:09:24 NVIDIA(0): Initialized GPU GART. > (II) Jan 20 19:09:24 NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select+0+0" > (II) Loading extension NV-GLX > (II) Jan 20 19:09:25 NVIDIA(0): Initialized OpenGL Acceleration > (==) NVIDIA(0): Disabling shared memory pixmaps > (II) Jan 20 19:09:25 NVIDIA(0): Initialized X Rendering Acceleration > (==) NVIDIA(0): Backing store disabled > (==) NVIDIA(0): Silken mouse enabled > (**) NVIDIA(0): DPMS enabled > (II) Loading extension NV-CONTROL > (II) Loading extension XINERAMA > (==) RandR enabled > (II) Jan 20 19:09:25 NVIDIA(1): Initialized GPU GART. > (II) Jan 20 19:09:25 NVIDIA(1): Setting mode "CRT-1:nvidia-auto-select+0+0" > (II) Jan 20 19:09:25 NVIDIA(1): Initialized OpenGL Acceleration > (==) NVIDIA(1): Disabling shared memory pixmaps > (II) Jan 20 19:09:25 NVIDIA(1): Initialized X Rendering Acceleration > (==) NVIDIA(1): Backing store disabled > (==) NVIDIA(1): Silken mouse enabled > (**) NVIDIA(1): DPMS enabled > (==) RandR enabled > (II) Initializing built-in extension Generic Event Extension > (II) Initializing built-in extension SHAPE > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension BIG-REQUESTS > (II) Initializing built-in extension SYNC > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension XC-MISC > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFIXES > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Initializing built-in extension COMPOSITE > (II) Initializing built-in extension DAMAGE > (II) Initializing extension GLX > SELinux: Disabled on system, not enabling in X server > (**) Option "CoreKeyboard" > (**) Keyboard0: always reports core events > (**) Option "Protocol" "standard" > (**) Keyboard0: Protocol: standard > (**) Option "XkbRules" "evdev" > (**) Keyboard0: XkbRules: "evdev" > (**) Option "XkbModel" "abnt2" > (**) Keyboard0: XkbModel: "abnt2" > (**) Option "XkbLayout" "br-abnt2" > (**) Keyboard0: XkbLayout: "br-abnt2" > (**) Option "XkbVariant" "deadkeys" > (**) Keyboard0: XkbVariant: "deadkeys" > (**) Option "CustomKeycodes" "off" > (**) Keyboard0: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD) > (**) Option "CoreKeyboard" "False" > (**) Keyboard1: doesn't report core events > (**) Option "Protocol" "standard" > (**) Keyboard1: Protocol: standard > (**) Option "XkbRules" "evdev" > (**) Keyboard1: XkbRules: "evdev" > (**) Option "XkbModel" "abnt2" > (**) Keyboard1: XkbModel: "abnt2" > (**) Option "XkbLayout" "br-abnt2" > (**) Keyboard1: XkbLayout: "br-abnt2" > (**) Option "XkbVariant" "deadkeys" > (**) Keyboard1: XkbVariant: "deadkeys" > (**) Option "CustomKeycodes" "off" > (**) Keyboard1: CustomKeycodes disabled > (II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD) > [mi] miSpriteRealizeCursor called for floating device. > [mi] miSpriteRealizeCursor called for floating device. > [mi] miSpriteRealizeCursor called for floating device. > (**) Option "Protocol" "auto" > (**) Option "Device" "/dev/psaux" > (II) Mouse0: Setting mouse protocol to "ExplorerPS/2" > (**) Mouse0: Device: "/dev/psaux" > (**) Mouse0: Protocol: "auto" > (**) Option "CorePointer" > (**) Mouse0: always reports core events > (**) Option "Device" "/dev/psaux" > (**) Option "Emulate3Buttons" "no" > (**) Option "ZAxisMapping" "4 5" > (**) Mouse0: ZAxisMapping: buttons 4 and 5 > (**) Mouse0: Buttons: 9 > (**) Mouse0: Sensitivity: 1 > (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE) > (**) Mouse0: (accel) keeping acceleration scheme 1 > (**) Mouse0: (accel) acceleration profile 0 > (**) Mouse0: (accel) acceleration factor: 2.000 > (**) Mouse0: (accel) acceleration threshold: 4 > (II) Mouse0: Setting mouse protocol to "ExplorerPS/2" > (II) Mouse0: ps2EnableDataReporting: succeeded > (II) config/udev: Adding input device Power Button (/dev/input/event2) > (**) Power Button: Applying InputClass "evdev keyboard catchall" > (**) Power Button: always reports core events > (**) Power Button: Device: "/dev/input/event2" > (II) Power Button: Found keys > (II) Power Button: Configuring as keyboard > (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "br" > (II) config/udev: Adding input device Power Button (/dev/input/event1) > (**) Power Button: Applying InputClass "evdev keyboard catchall" > (**) Power Button: always reports core events > (**) Power Button: Device: "/dev/input/event1" > (II) Power Button: Found keys > (II) Power Button: Configuring as keyboard > (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "br" > (II) config/udev: Adding input device HDA Digital PCBeep > (/dev/input/event8) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE > (/dev/input/event4) > (**) PIXART USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall" > (**) PIXART USB OPTICAL MOUSE: always reports core events > (**) PIXART USB OPTICAL MOUSE: Device: "/dev/input/event4" > (II) PIXART USB OPTICAL MOUSE: Found 3 mouse buttons > (II) PIXART USB OPTICAL MOUSE: Found scroll wheel(s) > (II) PIXART USB OPTICAL MOUSE: Found relative axes > (II) PIXART USB OPTICAL MOUSE: Found x and y relative axes > (II) PIXART USB OPTICAL MOUSE: Configuring as mouse > (**) PIXART USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5 > (**) PIXART USB OPTICAL MOUSE: EmulateWheelButton: 4, > EmulateWheelInertia: 10, EmulateWheelTimeout: 200 > (II) XINPUT: Adding extended input device "PIXART USB OPTICAL MOUSE" > (type: MOUSE) > (II) PIXART USB OPTICAL MOUSE: initialized for relative axes. > (II) config/udev: Adding input device PIXART USB OPTICAL MOUSE > (/dev/input/mouse0) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device USB Keyboard (/dev/input/event5) > (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" > (**) USB Keyboard: always reports core events > (**) USB Keyboard: Device: "/dev/input/event5" > (II) USB Keyboard: Found keys > (II) USB Keyboard: Configuring as keyboard > (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "br" > (II) config/udev: Adding input device USB Keyboard (/dev/input/event6) > (**) USB Keyboard: Applying InputClass "evdev keyboard catchall" > (**) USB Keyboard: always reports core events > (**) USB Keyboard: Device: "/dev/input/event6" > (II) USB Keyboard: Found keys > (II) USB Keyboard: Configuring as keyboard > (II) XINPUT: Adding extended input device " USB Keyboard" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "br" > (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event7) > (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall" > (**) USB Optical Mouse: always reports core events > (**) USB Optical Mouse: Device: "/dev/input/event7" > (II) USB Optical Mouse: Found 3 mouse buttons > (II) USB Optical Mouse: Found scroll wheel(s) > (II) USB Optical Mouse: Found relative axes > (II) USB Optical Mouse: Found x and y relative axes > (II) USB Optical Mouse: Found absolute axes > (II) USB Optical Mouse: Configuring as mouse > (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5 > (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: > 10, EmulateWheelTimeout: 200 > (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE) > (II) USB Optical Mouse: initialized for relative axes. > (WW) USB Optical Mouse: ignoring absolute axes. > (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse1) > (II) No input driver/identifier specified (ignoring) > (II) config/udev: Adding input device AT Translated Set 2 keyboard > (/dev/input/event0) > (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard > catchall" > (**) AT Translated Set 2 keyboard: always reports core events > (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0" > (II) AT Translated Set 2 keyboard: Found keys > (II) AT Translated Set 2 keyboard: Configuring as keyboard > (II) XINPUT: Adding extended input device "AT Translated Set 2 > keyboard" (type: KEYBOARD) > (**) Option "xkb_rules" "evdev" > (**) Option "xkb_model" "pc105" > (**) Option "xkb_layout" "br" > (II) config/udev: Adding input device PC Speaker (/dev/input/event3) > (II) No input driver/identifier specified (ignoring) > > A principio, os dois teclados foram devidamente reconhecidos. > > No terminal 1 eu tenho: teclado e mouse usb > > No terminal 2 eu tenho: mouse usb e teclado ps/2 > > Alguma sugestao? > > Obrigado > > -- > O__ --- Marcelo Luiz de Laia Rodovia MGT 367, Km 583 > c/ /' _ -- Dep. de Engenharia Florestal nº 5000, Alto da Jacuba > (*) \ (*) - UFVJM, Diamantina, MG, Brasil Ph: (+55) 38 3532 1248 > ~~~~~~- (www.ufvjm.edu.br/floresta) FAX: (+55) 38 3532 1200 > ^^^^^^^^^^- Linux user number 487797 CEP: 39.100-000 - Brazil > > > -- > To UNSUBSCRIBE, email to debian-user-portuguese-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact > listmas...@lists.debian.org > Archive: > http://lists.debian.org/aanlktin54kes2mvrauz7cweboqn-kjs23pu6jx48q...@mail.gmail.com > > Marcelo, O que está ocorrendo com o seu teclado é um bug conhecido. Não tem a ver com o xorg.conf. Você deve configurar o teclado para "evdev-managed" no seu ambiente gráfico. No kde você vai em Configurações do sistema > Regional e Idioma > Leiaute do teclado > na aba Leiaute vá em "Modelo de teclado" escolha "evdev managed keyboard". No Gnome não sei, mas deve ter algo semelhante. Veja também o tópico original, com as dicas do polegato.
