Opa Hoje eu atualizei o kernel para a versão 2.6.37.1, pois saiu o primeiro patch de correções. Dei uma olhada rápida no changelog e não encontrei nenhum problema referente ao que estou tendo. Vou ver se o problema foi resolvido e se voltar a ocorrer, aplico a alteração que vc sugeriu.
Valeu a força! Abraço On Fri, 18 Feb 2011 14:55:41 -0400 Rodolfo <rof20...@gmail.com> wrote: > Vamo tentar...... > > > no arquivo /etc/init.d/halt (como root) e coloca assim NO INICIO do arquivo: > > > rmmod snd_hda_intel > > > Da retorno. > > Em 18 de fevereiro de 2011 00:17, André Luiz Fraga Moreira < > andre4deb...@gmail.com> escreveu: > > > # lsmod | grep snd_hda_intel > > snd_hda_intel 18596 4 > > snd_hda_codec 52214 3 > > snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel > > snd_pcm 60511 3 snd_hda_intel,snd_hda_codec > > snd 46670 14 > > snd_hda_codec_idt,snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device > > snd_page_alloc 6081 2 snd_hda_intel,snd_pcm > > > > É, eu tenho o módulo ativo. Mas será que é por causa desse módulo? Porque o > > problema só ocorre no kernel 2.6.37 e desde o 2.6.33 a máquina nunca tinha > > congelado no desligamento mesmo com o módulo ativo. > > > > Abraço > > > > On Thu, 17 Feb 2011 21:56:13 -0400 > > Rodolfo <rof20...@gmail.com> wrote: > > > > > SO mais um pedido, digite como root: > > > > > > lsmod | grep snd_hda_intel > > > > > > > > > quero saber se você usa esse modulo como driver de som. Algumas pessoas > > tem > > > este tipo de problema ao usar o módulo acima citado. > > > > > > > > > Abraços > > > > > > Em 17 de fevereiro de 2011 21:43, André Luiz Fraga Moreira < > > > andre4deb...@gmail.com> escreveu: > > > > > > > # dmesg | grep acpi > > > > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > > > [ 2.950953] ACPI: acpi_idle registered with cpuidle > > > > [ 26.675955] acpi device:30: registered as cooling_device2 > > > > > > > > > > > > Estou mandando também a saída usando a opção -i do grep, para mostrar > > mais > > > > saídas referentes a acpi tanto em letras maiúsculas quanto em > > minúsculas de > > > > forma a ficar mais detalhado. > > > > > > > > # dmesg | grep -i acpi > > > > [ 0.000000] ACPI: RSDP 00000000000fbc60 00024 (v02 DELL ) > > > > [ 0.000000] ACPI: XSDT 00000000bf66f200 00064 (v01 DELL M08 > > > > 27D80A10 ASL 00000061) > > > > [ 0.000000] ACPI: FACP 00000000bf66f09c 000F4 (v04 DELL M08 > > > > 27D80A10 ASL 00000061) > > > > [ 0.000000] ACPI: DSDT 00000000bf66f800 05477 (v02 INT430 SYSFexxx > > > > 00001001 INTL 20050624) > > > > [ 0.000000] ACPI: FACS 00000000bf67e000 00040 > > > > [ 0.000000] ACPI: HPET 00000000bf66f300 00038 (v01 DELL M08 > > > > 00000001 ASL 00000061) > > > > [ 0.000000] ACPI: APIC 00000000bf66f400 00068 (v01 DELL M08 > > > > 27D80A10 ASL 00000047) > > > > [ 0.000000] ACPI: MCFG 00000000bf66f3c0 0003E (v16 DELL M08 > > > > 27D80A10 ASL 00000061) > > > > [ 0.000000] ACPI: SLIC 00000000bf66f49c 00176 (v01 DELL M08 > > > > 27D80A10 ASL 00000061) > > > > [ 0.000000] ACPI: OSFR 00000000bf66ea00 0002C (v01 DELL M08 > > > > 27D80A10 ASL 00000061) > > > > [ 0.000000] ACPI: BOOT 00000000bf66efc0 00028 (v01 DELL M08 > > > > 27D80A10 ASL 00000061) > > > > [ 0.000000] ACPI: SSDT 00000000bf66da44 004CC (v01 PmRef CpuPm > > > > 00003000 INTL 20050624) > > > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > > > [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 > > > > [ 0.000000] ACPI: Local APIC address 0xfee00000 > > > > [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) > > > > [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) > > > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) > > > > [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) > > > > [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > > > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > > > > [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high > > level) > > > > [ 0.000000] ACPI: IRQ0 used by override. > > > > [ 0.000000] ACPI: IRQ2 used by override. > > > > [ 0.000000] ACPI: IRQ9 used by override. > > > > [ 0.000000] Using ACPI (MADT) for SMP configuration information > > > > [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 > > > > [ 0.008585] ACPI: Core revision 20101013 > > > > [ 0.148662] ACPI: bus type pci registered > > > > [ 0.153294] ACPI: EC: Look up EC in DSDT > > > > [ 0.166448] ACPI: SSDT 00000000bf66e57a 00202 (v01 PmRef Cpu0Ist > > > > 00003000 INTL 20050624) > > > > [ 0.166832] ACPI: Dynamic OEM Table Load: > > > > [ 0.166974] ACPI: SSDT (null) 00202 (v01 PmRef Cpu0Ist > > > > 00003000 INTL 20050624) > > > > [ 0.167407] ACPI: SSDT 00000000bf66df10 005E5 (v01 PmRef Cpu0Cst > > > > 00003001 INTL 20050624) > > > > [ 0.167778] ACPI: Dynamic OEM Table Load: > > > > [ 0.167920] ACPI: SSDT (null) 005E5 (v01 PmRef Cpu0Cst > > > > 00003001 INTL 20050624) > > > > [ 0.168374] ACPI: SSDT 00000000bf66e77c 000C4 (v01 PmRef Cpu1Ist > > > > 00003000 INTL 20050624) > > > > [ 0.168748] ACPI: Dynamic OEM Table Load: > > > > [ 0.168890] ACPI: SSDT (null) 000C4 (v01 PmRef Cpu1Ist > > > > 00003000 INTL 20050624) > > > > [ 0.169170] ACPI: SSDT 00000000bf66e4f5 00085 (v01 PmRef Cpu1Cst > > > > 00003000 INTL 20050624) > > > > [ 0.169535] ACPI: Dynamic OEM Table Load: > > > > [ 0.169677] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst > > > > 00003000 INTL 20050624) > > > > [ 0.170011] ACPI: Interpreter enabled > > > > [ 0.170069] ACPI: (supports S0 S3 S4 S5) > > > > [ 0.170309] ACPI: Using IOAPIC for interrupt routing > > > > [ 0.205488] PCI: Using host bridge windows from ACPI; if necessary, > > use > > > > "pci=nocrs" and report a bug > > > > [ 0.218138] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) > > > > [ 0.245781] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by > > ICH6 > > > > ACPI/GPIO/TCO > > > > [ 0.255791] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > > > > [ 0.256056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] > > > > [ 0.256161] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] > > > > [ 0.256215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] > > > > [ 0.256272] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] > > > > [ 0.266097] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11) > > > > [ 0.266450] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 > > > > [ 0.266800] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *5 > > > > [ 0.267182] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *0, > > > > disabled. > > > > [ 0.267702] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 > > 12 > > > > 14 15) > > > > [ 0.268398] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 > > 12 > > > > 14 15) > > > > [ 0.269097] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 > > 12 > > > > 14 15) > > > > [ 0.269782] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 > > 12 > > > > 14 15) *0, disabled. > > > > [ 0.270948] PCI: Using ACPI for IRQ routing > > > > [ 0.277738] pnp: PnP ACPI init > > > > [ 0.277812] ACPI: bus type pnp registered > > > > [ 0.290206] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 > > (active) > > > > [ 0.290275] pnp 00:01: Plug and Play ACPI device, IDs PNP0c02 > > (active) > > > > [ 0.290329] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 > > (active) > > > > [ 0.290384] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 > > (active) > > > > [ 0.290435] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 > > (active) > > > > [ 0.290485] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 > > (active) > > > > [ 0.290547] pnp 00:06: Plug and Play ACPI device, IDs PNP0c01 > > (active) > > > > [ 0.290608] pnp 00:07: Plug and Play ACPI device, IDs PNP0200 > > (active) > > > > [ 0.290659] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 > > (active) > > > > [ 0.290748] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 > > PNP0c01 > > > > (active) > > > > [ 0.291108] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 > > (active) > > > > [ 0.291510] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 > > (active) > > > > [ 0.305393] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 > > (active) > > > > [ 0.305457] pnp: PnP ACPI: found 13 devices > > > > [ 0.305515] ACPI: ACPI bus type pnp unregistered > > > > [ 0.556731] ACPI: Thermal Zone [THM] (39 C) > > > > [ 2.906534] ACPI: Lid Switch [LID] > > > > [ 2.906802] ACPI: Power Button [PBTN] > > > > [ 2.907060] ACPI: Sleep Button [SBTN] > > > > [ 2.950953] ACPI: acpi_idle registered with cpuidle > > > > [ 2.971400] ACPI: AC Adapter [AC] (on-line) > > > > [ 3.037921] ACPI: Battery Slot [BAT0] (battery present) > > > > [ 26.675955] acpi device:30: registered as cooling_device2 > > > > [ 26.676541] ACPI: Video Device [VID] (multi-head: yes rom: no > > post: > > > > no) > > > > [ 26.676572] [Firmware Bug]: Duplicate ACPI video bus devices for the > > > > same VGA controller, please try module parameter > > > > "video.allow_duplicates=1"if the current driver doesn't work. > > > > > > > > On Thu, 17 Feb 2011 18:07:15 -0400 > > > > Rodolfo <rof20...@gmail.com> wrote: > > > > > > > > > digita dmesg | grep acpi e informe-nos a saida desse comando.. > > > > Ah...digite > > > > > como root > > > > > > > > > > > > > > > > > > > > Em 16 de fevereiro de 2011 22:35, André Luiz Fraga Moreira < > > > > > andre4deb...@gmail.com> escreveu: > > > > > > > > > > > Boa noite, amigos da lista > > > > > > > > > > > > Estou com o seguinte problema: > > > > > > > > > > > > Depois que compilei e instalei o kernel 2.6.37 no meu Debian, às > > vezes > > > > meu > > > > > > notebook trava durante o desligamento. O reboot é sempre normal, > > mas o > > > > > > desligamento de vez em quando agarra, ficando parado em uma > > mensagem > > > > > > "Disabling non-boot CPUs". > > > > > > > > > > > > Cheguei a suspeitar que era o BLK (Big Kernel Lock) que estava > > causando > > > > o > > > > > > problema, mas mesmo após desabilitá-lo, o erro ocorria. > > > > > > > > > > > > Pesquisando na Internet, vi que poderia ser problema na BIOS da > > > > máquina, > > > > > > mas fiz testes usando o kernel anterior (2.6.36.2) e não ocorreram > > > > problemas > > > > > > durante o desligamento, o que me fez suspeitar do kernel 2.6.37. > > > > > > > > > > > > Alguém sabe se é algum bug no kernel 2.6.37 ou algo do tipo que > > esteja > > > > > > causando isso? O estranho é que o problema não ocorre toda vez que > > eu > > > > > > desligo a máquina, só de vez em quando. Meu notebook é um Dell > > Inspiron > > > > > > 1525. > > > > > > > > > > > > Agradeço qualquer ajuda, valeu! > > > > > > > > > > > > -- > > > > > > André Luiz Fraga Moreira <andre4deb...@gmail.com> > > > > > > Matriculado no curso de Tecnologia em Redes de Computadores > > > > > > Linux Professional Institute Certified - LPIC 1 > > > > > > Debian user - www.debian.org > > > > > > twitter e identi.ca: @andreluizfm > > > > > > > > > > > > > > > > > > -- > > > > André Luiz Fraga Moreira <andre4deb...@gmail.com> > > > > Matriculado no curso de Tecnologia em Redes de Computadores > > > > Linux Professional Institute Certified - LPIC 1 > > > > Debian user - www.debian.org > > > > twitter e identi.ca: @andreluizfm > > > > > > > > > > -- > > André Luiz Fraga Moreira <andre4deb...@gmail.com> > > Matriculado no curso de Tecnologia em Redes de Computadores > > Linux Professional Institute Certified - LPIC 1 > > Debian user - www.debian.org > > twitter e identi.ca: @andreluizfm > > -- André Luiz Fraga Moreira <andre4deb...@gmail.com> Matriculado no curso de Tecnologia em Redes de Computadores Linux Professional Institute Certified - LPIC 1 Debian user - www.debian.org twitter e identi.ca: @andreluizfm
pgpwBsXIQIsWC.pgp
Description: PGP signature