Le lundi 13 septembre 2021 à 17:20 -0300, Gilberto F da Silva a écrit : > On Sep 10, 2021 12:34:30PM −3, Leandro Guimarães Faria Corcete DUTRA: > 10 set 2021 9:40 −3, Gilberto F da Silva: > > No Slackware o halt desliga a máquina. > > man halt: > > ‘Note that on many SysV systems halt used to be synonymous > to poweroff, i.e. both commands would equally result in > powering the machine off. systemd is more accurate here, > and halt results in halting the machine only (leaving > power on)
Isso fala que *era* o caso em alguns SysV, mas que não é o caso no systemd, e nada fala sobre o Slackware. >> ¿Que diz o man do Slackware? > > NOTES > > Under older sysvinit releases, reboot and halt should never be > called directly. From release 2.74 on halt and reboot invoke > shutdown(8) if the system is not in runlevel 0 or 6. This means > that if halt or reboot cannot find out the current runlevel (for > example, when /var/run/utmp hasn't been initialized correctly and > /var/run/runlevel does not exist) shutdown will be called, which > might not be what you want. Use the -f flag if you want to do a > hard halt or reboot. > > The -h flag puts all hard disks in standby mode just before halt > or power-off. Right now this is only implemented for IDE drives. A > side effect of putting the drive in stand-by mode is that the > write cache on the disk is flushed. This is important for IDE > drives, since the kernel doesn't flush the write cache itself > before power-off. Ainda não está claro. Se isso é parte do man halt do Slackware, diz apenas que chama o shutdown em algumas circunstâncias, mas não diz com que parâmetros exatamente. De qualquer modo, é irrelevante aqui nesta lista de Debian… -- /¯\ \ / +55 (61) 3546 7191 xmpp:leand...@jabber.org X +55 (61) 99302 2691 / \ BRAZIL GMT−3 https://useplaintext.email/#why-plaintext
