Ei tive este problema há um tempo atrás e solucionei da seguinte forma: #update-fonts-dir /usr/lib/X11/fonts/misc
[]'s Em Qui, 2001-11-29 às 15:41, Fabiano Manoel de Andrade escreveu: > > > Olá Pessoal. > > Uso a testing e depois do último upgrade neste final de semana > não estou conseguindo inicializar a interface gráfica. Ai esta a saída > do > comando X > /tmp/x.out 2>&1 > > XFree86 Version 3.3.6a / X Window System > (protocol Version 11, revision 0, vendor release 6300) > Release Date: xx November 2000 > If the server is older than 6-12 months, or if your card is newer > than the above date, look for a newer version before reporting > problems. (see http://www.XFree86.Org/FAQ) > Operating System: Linux 2.4.13 i686 [ELF] > Configured drivers: > S3: accelerated server for S3 graphics adaptors (Patchlevel 0) > newmmio, mmio_928, s3_generic > (using VT number 7) > > XF86Config: /etc/X11/XF86Config > (**) stands for supplied, (--) stands for probed/default values > (--) no ModulePath specified using default: /usr/X11R6/lib/modules > pex5.so: Unknown error loading module > xie.so: Unknown error loading module > (**) XKB: rules: "xfree86" > (**) XKB: model: "abnt2" > (**) XKB: layout: "br" > (**) Mouse: type: PS/2, device: /dev/mouse, buttons: 3 > (**) Mouse: 3 button emulation (timeout: 50ms) > (**) S3: Graphics device ID: "Generic Video Card" > (**) S3: Monitor ID: "Generic Monitor" > (--) S3: Mode "800x600" needs hsync freq of 48.08 kHz. Deleted. > (--) S3: Mode "800x600" needs hsync freq of 53.72 kHz. Deleted. > (--) S3: Mode "1024x768" needs hsync freq of 48.36 kHz. Deleted. > (--) S3: Mode "1024x768" needs hsync freq of 56.48 kHz. Deleted. > (--) S3: Mode "1024x768" needs hsync freq of 60.06 kHz. Deleted. > (--) S3: Mode "1024x768" needs hsync freq of 68.68 kHz. Deleted. > (--) S3: Mode "1152x864" needs hsync freq of 67.50 kHz. Deleted. > (--) S3: Mode "1280x960" needs hsync freq of 60.00 kHz. Deleted. > (--) S3: Mode "1280x960" needs hsync freq of 85.94 kHz. Deleted. > (--) S3: Mode "1280x1024" needs hsync freq of 63.98 kHz. Deleted. > (--) S3: Mode "1280x1024" needs hsync freq of 79.98 kHz. Deleted. > (--) S3: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. > (--) S3: Mode "1600x1200" needs hsync freq of 75.00 kHz. Deleted. > (--) S3: Mode "1600x1200" needs hsync freq of 81.25 kHz. Deleted. > (--) S3: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. > (--) S3: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. > (--) S3: Mode "1600x1200" needs hsync freq of 106.25 kHz. Deleted. > (--) S3: Mode "1792x1344" needs hsync freq of 83.66 kHz. Deleted. > (--) S3: Mode "1792x1344" needs hsync freq of 106.27 kHz. Deleted. > (--) S3: Mode "1856x1392" needs hsync freq of 86.35 kHz. Deleted. > (--) S3: Mode "1856x1392" needs hsync freq of 112.50 kHz. Deleted. > (--) S3: Mode "1920x1440" needs hsync freq of 90.00 kHz. Deleted. > (--) S3: Mode "1920x1440" needs hsync freq of 112.50 kHz. Deleted. > Warning: The directory "/usr/lib/X11/fonts/CID" does not exist. > Entry deleted from font path. > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11 > /fonts/75dpi/:unscaled,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/font > s/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/75dpi,/usr/lib/X11/font > s/100dpi" > (--) S3: PCI: Trio64V2 rev 14, Linear FB @ 0xe0000000 > (--) S3: chipset: Trio64V2/DX rev. 14 > (--) S3: chipset driver: newmmio > (**) S3: Option "power_saver" > (--) S3: card type: PCI > (--) S3: videoram: 2048k > (--) S3: Ramdac type: s3_trio64v2 > (--) S3: Ramdac speed: 170 MHz > (--) S3: Using Trio64V2 programmable clock (MCLK 50.114 MHz) > (--) S3: Maximum allowed dot-clock: 170.000 MHz > (**) S3: Mode "1024x768": mode clock = 44.900 > (**) S3: Mode "800x600": mode clock = 49.500 > (**) S3: Mode "640x480": mode clock = 36.000 > (**) S3: Using 16 bpp. Color weight: 565 > (--) S3: Virtual resolution set to 1024x768 > (--) S3: Local bus LAW is 0xE0000000 > (--) S3: Using a banksize of 2048k, line width of 1024 > (--) S3: Using a single 64x64 area at (960,769) for expanding pixmaps > (--) S3: Using 16 planes of 960x255 at (0,769) aligned 8 as font cache > > Fatal server error: > could not open default font 'fixed' > > When reporting a problem related to a server crash, please send > the full server output, not just the last messages > > Sei que o servidor gráfico não esta encontrando as fontes 'fixed', > mas estou com o pacote xfonts-misc instalado. Alguém pode me ajudar? > > Valeu. > Fabiano. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- /========================================================================\ .''`. | Lucianno Albuquerque Ramalho | : :' : | [EMAIL PROTECTED] - [EMAIL PROTECTED] | dot\/ `. `'` | Linux User #197232 - ICQ #45967059 | /\ `- | Live Free or Die !!! - Powered by Debian GNU/Linux | \========================================================================/
