Seu X carrega uma pancada de extenções, vai tirando elas aos poucos e testando pra ver se resolve.
miguel On Fri, 10 Sep 2004 09:29:52 -0300, Maurício <[EMAIL PROTECTED]> wrote: > > > > > Pessoal, > > > > > > Estou usando o sarge. Depois de um recente apt-get update, > apt-get upgrade o X passou a dar pau logo que é iniciado. Onde posso > procurar por mensagens de erro? > > > > > > Obrigado, > > > Maurício > > > > > > > > > > Provavelmente no arquivo /var/log/XFree86.8.log. Boa sorte :) > > > > Não consegui encontrar nada lá que se parecesse com uma mensagem de > erro. Estou copiando aqui o XFree86.0.log e o XF86Config-4. Será que eu > deixei passar alguma coisa? > > ################################################################ > ################################################################ > ########### Aqui inicia o meu /var/log/XFree86.0.log ########### > ################################################################ > ################################################################ > > This is a pre-release version of XFree86, and is not supported in any > way. Bugs may be reported to XFree86@XFree86.Org and patches submitted > to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, > please check the latest version in the XFree86 CVS repository > (http://www.XFree86.Org/cvs). > > XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-4 20040529113443 > [EMAIL PROTECTED]) > Release Date: 15 August 2003 > X Protocol Version 11, Revision 0, Release 6.6 > Build Operating System: Linux 2.6.6-rc3-bk9 i686 [ELF] > Build Date: 29 May 2004 > Before reporting problems, check http://www.XFree86.Org/ > to make sure that you have the latest version. > Module Loader present > OS Kernel: Linux version 2.6.6-1-686 ([EMAIL PROTECTED]) (gcc version > 3.3.3 (Debian 20040401)) #1 Wed May 12 14:57:57 EST 2004 > Markers: (--) probed, (**) from config file, (==) default setting, > (++) from command line, (!!) notice, (II) informational, > (WW) warning, (EE) error, (NI) not implemented, (??) unknown. > (==) Log file: "/var/log/XFree86.0.log", Time: Thu Sep 9 21:25:25 2004 > (==) Using config file: "/etc/X11/XF86Config-4" > (==) ServerLayout "Default Layout" > (**) |-->Screen "Default Screen" (0) > (**) | |-->Monitor "Generic Monitor" > (**) | |-->Device "S3 Inc. 86c988 [ViRGE/VX]" > (**) |-->Input Device "Generic Keyboard" > (**) Option "XkbRules" "xfree86" > (**) XKB: rules: "xfree86" > (**) Option "XkbModel" "pc104" > (**) XKB: model: "pc104" > (**) Option "XkbLayout" "us_intl" > (**) XKB: layout: "us_intl" > (==) Keyboard: CustomKeycode disabled > (**) |-->Input Device "Configured Mouse" > (WW) The directory "/usr/lib/X11/fonts/cyrillic" does not exist. > Entry deleted from font path. > (WW) The directory "/usr/lib/X11/fonts/CID" does not exist. > Entry deleted from font path. > (**) FontPath set to > "unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi" > (==) RgbPath set to "/usr/X11R6/lib/X11/rgb" > (==) ModulePath set to "/usr/X11R6/lib/modules" > (--) using VT number 7 > > (II) Open APM successful > (II) Module ABI versions: > XFree86 ANSI C Emulation: 0.2 > XFree86 Video Driver: 0.6 > XFree86 XInput driver : 0.4 > XFree86 Server Extension : 0.2 > XFree86 Font Renderer : 0.4 > (II) Loader running on linux > (II) LoadModule: "bitmap" > (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Module bitmap: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Bitmap > (II) LoadModule: "pcidata" > (II) Loading /usr/X11R6/lib/modules/libpcidata.a > (II) Module pcidata: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) PCI: Probing config type using method 1 > (II) PCI: Config type is 1 > (II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000 > (II) PCI: PCI scan (all values are in hex) > (II) PCI: 00:00:0: chip 1106,0605 card 1043,802c rev 81 class 06,00,00 > hdr 00 > (II) PCI: 00:01:0: chip 1106,8605 card 0000,0000 rev 00 class 06,04,00 > hdr 01 > (II) PCI: 00:04:0: chip 1106,0686 card 1043,802c rev 22 class 06,01,00 > hdr 80 > (II) PCI: 00:04:1: chip 1106,0571 card 0000,0000 rev 10 class 01,01,8a > hdr 00 > (II) PCI: 00:04:2: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 > hdr 00 > (II) PCI: 00:04:3: chip 1106,3038 card 0925,1234 rev 10 class 0c,03,00 > hdr 00 > (II) PCI: 00:04:4: chip 1106,3057 card 0000,0000 rev 30 class 06,00,00 > hdr 00 > (II) PCI: 00:04:5: chip 1106,3058 card 1043,11d4 rev 20 class 04,01,00 > hdr 00 > (II) PCI: 00:0f:0: chip 5333,883d card 0000,0000 rev 02 class 03,00,00 > hdr 00 > (II) PCI: 00:10:0: chip 10ec,8029 card 0000,0000 rev 00 class 02,00,00 > hdr 00 > (II) PCI: End of PCI scan > (II) Host-to-PCI bridge: > (II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus 0 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus 0 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus 0 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) PCI-to-PCI bridge: > (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0000 (VGA_EN is cleared) > (II) PCI-to-ISA bridge: > (II) Bus -1: bridge is at (0:4:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) > (II) Host-to-PCI bridge: > (II) Bus -1: bridge is at (0:4:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set) > (II) Bus -1 I/O range: > [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) Bus -1 non-prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (II) Bus -1 prefetchable memory range: > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > (--) PCI:*(0:15:0) S3 Inc. 86c988 [ViRGE/VX] rev 2, Mem @ 0xf0000000/26, > BIOS @ 0x000c0000/16 > (II) Addressable bus resource ranges are > [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] > [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] > (II) OS-reported resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to > 0xf7ffffff > (II) Active PCI resource ranges: > [0] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O > [1] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [2] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) > [3] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [4] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] > [5] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] > [6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] > [7] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] > [8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > [9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > (II) Active PCI resource ranges after removing overlaps: > [0] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O > [1] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [2] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) > [3] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [4] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] > [5] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] > [6] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] > [7] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] > [8] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > [9] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > (II) OS-reported resource ranges after removing overlaps with PCI: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > (II) All system resource ranges: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O > [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) > [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [10] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [11] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] > [12] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] > [13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] > [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] > [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > [16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > (II) LoadModule: "GLcore" > (II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a > Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": > No symbols found > Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o": > No symbols found > Skipping > "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o": No > symbols found > Skipping > "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o": No > symbols found > (II) Module GLcore: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) LoadModule: "bitmap" > (II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a > (II) Loading font Bitmap > (II) LoadModule: "dbe" > (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a > (II) Module dbe: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension DOUBLE-BUFFER > (II) LoadModule: "ddc" > (II) Loading /usr/X11R6/lib/modules/libddc.a > (II) Module ddc: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "dri" > (II) Loading /usr/X11R6/lib/modules/extensions/libdri.a > (II) Module dri: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "drm" > (II) LoadModule: "drm" > (II) Loading /usr/X11R6/lib/modules/linux/libdrm.a > (II) Module drm: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension XFree86-DRI > (II) LoadModule: "extmod" > (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a > (II) Module extmod: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension SHAPE > (II) Loading extension MIT-SUNDRY-NONSTANDARD > (II) Loading extension BIG-REQUESTS > (II) Loading extension SYNC > (II) Loading extension MIT-SCREEN-SAVER > (II) Loading extension XC-MISC > (II) Loading extension XFree86-VidModeExtension > (II) Loading extension XFree86-Misc > (II) Loading extension XFree86-DGA > (II) Loading extension DPMS > (II) Loading extension FontCache > (II) Loading extension TOG-CUP > (II) Loading extension Extended-Visual-Information > (II) Loading extension XVideo > (II) Loading extension XVideo-MotionCompensation > (II) Loading extension X-Resource > (II) LoadModule: "freetype" > (II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a > (II) Module freetype: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 2.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font FreeType > (II) LoadModule: "glx" > (II) Loading /usr/X11R6/lib/modules/extensions/libglx.a > (II) Module glx: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading sub module "GLcore" > (II) LoadModule: "GLcore" > (II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a > (II) Loading extension GLX > (II) LoadModule: "int10" > (II) Loading /usr/X11R6/lib/modules/linux/libint10.a > (II) Module int10: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "record" > (II) Loading /usr/X11R6/lib/modules/extensions/librecord.a > (II) Module record: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.13.0 > Module class: XFree86 Server Extension > ABI class: XFree86 Server Extension, version 0.2 > (II) Loading extension RECORD > (II) LoadModule: "speedo" > (II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a > Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o": No > symbols found > (II) Module speedo: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.1 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Speedo > (II) LoadModule: "type1" > (II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a > (II) Module type1: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.2 > Module class: XFree86 Font Renderer > ABI class: XFree86 Font Renderer, version 0.4 > (II) Loading font Type1 > (II) Loading font CID > (II) LoadModule: "vbe" > (II) Loading /usr/X11R6/lib/modules/libvbe.a > (II) Module vbe: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "s3virge" > (II) Loading /usr/X11R6/lib/modules/drivers/s3virge_drv.o > (II) Module s3virge: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.8.6 > Module class: XFree86 Video Driver > ABI class: XFree86 Video Driver, version 0.6 > (II) LoadModule: "mouse" > (II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o > (II) Module mouse: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > Module class: XFree86 XInput Driver > ABI class: XFree86 XInput driver, version 0.4 > (II) S3VIRGE: driver (version 1.8.6) for S3 ViRGE chipsets: virge, 86C325, > virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge gx2, > 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, > trio 3d/2x, 86C362, 86C368 > (II) Primary Device is: PCI 00:0f:0 > (--) Assigning device section with no busID to primary device > (--) Chipset virge vx found > (II) resource ranges after xf86ClaimFixedResources() call: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O > [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) > [8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [10] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [11] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] > [12] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] > [13] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] > [14] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] > [15] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > [16] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > (II) resource ranges after probing: > [0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [3] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [5] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O > [6] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [7] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) > [8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B] > [9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B] > [10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B] > [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [13] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [14] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] > [15] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] > [16] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] > [17] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] > [18] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > [19] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > [20] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B] > [21] 0 0 0x000003c0 - 0x000003df (0x20) IS[B] > (II) Setting vga for screen 0. > (II) Loading sub module "vgahw" > (II) LoadModule: "vgahw" > (II) Loading /usr/X11R6/lib/modules/libvgahw.a > (II) Module vgahw: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (**) S3VIRGE(0): Depth 24, (--) framebuffer bpp 24 > (==) S3VIRGE(0): RGB weight 888 > (==) S3VIRGE(0): Default visual is TrueColor > (==) S3VIRGE(0): Using HW Cursor > (==) S3VIRGE(0): Using fb. > (==) S3VIRGE(0): mx_cr3a_fix. > (II) Loading sub module "vbe" > (II) LoadModule: "vbe" > (II) Reloading /usr/X11R6/lib/modules/libvbe.a > (II) Loading sub module "int10" > (II) LoadModule: "int10" > (II) Reloading /usr/X11R6/lib/modules/linux/libint10.a > (II) S3VIRGE(0): initializing int10 > (II) S3VIRGE(0): Primary V_BIOS segment is: 0xc000 > (II) S3VIRGE(0): VESA BIOS detected > (II) S3VIRGE(0): VESA VBE Version 1.2 > (II) S3VIRGE(0): VESA VBE Total Mem: 4096 kB > (II) S3VIRGE(0): VESA VBE OEM: Diamond Stealth 3D 3000 > (--) S3VIRGE(0): Chipset: "virge vx" > (==) S3VIRGE(0): XVideo not supported. > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (II) Loading sub module "ddc" > (II) LoadModule: "ddc" > (II) Reloading /usr/X11R6/lib/modules/libddc.a > (--) S3VIRGE(0): No DDC signal > (II) Loading sub module "i2c" > (II) LoadModule: "i2c" > (II) Loading /usr/X11R6/lib/modules/libi2c.a > (II) Module i2c: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.2.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) S3VIRGE(0): I2C bus "I2C bus" initialized. > (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0. > (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed. > (II) S3VIRGE(0): I2C device "I2C bus:ddc2" registered at address 0xA0. > (II) S3VIRGE(0): I2C device "I2C bus:ddc2" removed. > (II) S3VIRGE(0): Manufacturer: SAM Model: 9a Serial#: 1195847989 > (II) S3VIRGE(0): Year: 2003 Week: 35 > (II) S3VIRGE(0): EDID Version: 1.3 > (II) S3VIRGE(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V > (II) S3VIRGE(0): Sync: Separate > (II) S3VIRGE(0): Max H-Image Size [cm]: horiz.: 30 vert.: 23 > (II) S3VIRGE(0): Gamma: 2.78 > (II) S3VIRGE(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display > (II) S3VIRGE(0): First detailed timing is preferred mode > (II) S3VIRGE(0): redX: 0.601 redY: 0.335 greenX: 0.304 greenY: 0.593 > (II) S3VIRGE(0): blueX: 0.149 blueY: 0.106 whiteX: 0.295 whiteY: 0.310 > (II) S3VIRGE(0): Supported VESA Video Modes: > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): [EMAIL PROTECTED] > (II) S3VIRGE(0): Manufacturer's mask: 0 > (II) S3VIRGE(0): Supported Future Video Modes: > (II) S3VIRGE(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273 > (II) S3VIRGE(0): #1: hsize: 800 vsize 600 refresh: 75 vid: 20293 > (II) S3VIRGE(0): #2: hsize: 1024 vsize 768 refresh: 75 vid: 20321 > (II) S3VIRGE(0): #3: hsize: 640 vsize 480 refresh: 60 vid: 16433 > (II) S3VIRGE(0): Supported additional Video Mode: > (II) S3VIRGE(0): clock: 65.0 MHz Image Size: 304 x 228 mm > (II) S3VIRGE(0): h_active: 1024 h_sync: 1048 h_sync_end 1184 > h_blank_end 1344 h_border: 0 > (II) S3VIRGE(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: > 806 v_border: 0 > (II) S3VIRGE(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 61 > kHz, PixClock max 80 MHz > (II) S3VIRGE(0): Monitor name: SyncMaster > (II) S3VIRGE(0): Serial No: HXCW801803 > (==) S3VIRGE(0): Using gamma correction (1.0, 1.0, 1.0) > (--) S3VIRGE(0): videoram: 4096k > (--) S3VIRGE(0): Detected current MCLK value of 54.886 MHz > (WW) S3VIRGE(0): config file vrefresh range 50-75Hz not within DDC > vrefresh range 56-75Hz > (II) S3VIRGE(0): Generic Monitor: Using hsync range of 30.00-60.00 kHz > (II) S3VIRGE(0): Generic Monitor: Using vrefresh range of 50.00-75.00 Hz > (II) S3VIRGE(0): Clock range: 10.00 to 440.00 MHz > (II) S3VIRGE(0): Not using default mode "640x350" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "320x175" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "640x400" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "320x200" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "720x400" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "360x200" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "640x480" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "320x240" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "800x600" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "400x300" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "1024x768" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "512x384" (vrefresh out of range) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "512x384" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1152x864" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "576x432" (hsync out of range) > (WW) (1280x960,Generic Monitor) mode clock 108MHz exceeds DDC maximum 80MHz > (II) S3VIRGE(0): Not using default mode "1280x960" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x480" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x1024" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "640x512" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1200" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x600" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1792x1344" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "896x672" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1856x1392" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "928x696" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1400x1050" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "700x525" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1600x1024" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "800x512" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1920x1440" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "960x720" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "2048x1536" (insufficient memory > for mode) > (II) S3VIRGE(0): Not using default mode "1024x768" (hsync out of range) > (II) S3VIRGE(0): Not using default mode "1280x960" (width too large for > virtual size) > (II) S3VIRGE(0): Not using default mode "1152x768" (width too large for > virtual size) > (--) S3VIRGE(0): Virtual size is 1024x768 (pitch 1024) > (**) S3VIRGE(0): *Default mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz > (II) S3VIRGE(0): Modeline "1024x768" 78.80 1024 1040 1136 1312 768 > 769 772 800 +hsync +vsync > (**) S3VIRGE(0): *Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz > (II) S3VIRGE(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 > 604 625 +hsync +vsync > (**) S3VIRGE(0): *Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz > (II) S3VIRGE(0): Modeline "640x480" 31.50 640 656 720 840 480 481 > 484 500 -hsync -vsync > (**) S3VIRGE(0): Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz > (II) S3VIRGE(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 > 771 777 806 -hsync -vsync > (**) S3VIRGE(0): Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz > (II) S3VIRGE(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 > 771 777 806 -hsync -vsync > (**) S3VIRGE(0): Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz > (II) S3VIRGE(0): Modeline "832x624" 57.28 832 864 928 1152 624 625 > 628 667 -hsync -vsync > (**) S3VIRGE(0): Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz > (II) S3VIRGE(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 > 643 666 +hsync +vsync > (**) S3VIRGE(0): Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz > (II) S3VIRGE(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 > 605 628 +hsync +vsync > (**) S3VIRGE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz > (II) S3VIRGE(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 > 603 625 +hsync +vsync > (**) S3VIRGE(0): Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz > (II) S3VIRGE(0): Modeline "640x480" 31.50 640 664 704 832 480 489 > 491 520 -hsync -vsync > (**) S3VIRGE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz > (II) S3VIRGE(0): Modeline "640x480" 25.20 640 656 752 800 480 490 > 492 525 -hsync -vsync > (**) S3VIRGE(0): Default mode "640x480": 54.0 MHz, 60.0 kHz, 60.0 Hz (D) > (II) S3VIRGE(0): Modeline "640x480" 54.00 640 688 744 900 480 480 > 482 500 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "576x384": 32.5 MHz, 44.2 kHz, 54.8 Hz (D) > (II) S3VIRGE(0): Modeline "576x384" 32.50 576 589 657 736 384 385 > 388 403 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D) > (II) S3VIRGE(0): Modeline "512x384" 39.40 512 520 568 656 384 384 > 386 400 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D) > (II) S3VIRGE(0): Modeline "512x384" 37.50 512 524 592 664 384 385 > 388 403 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D) > (II) S3VIRGE(0): Modeline "512x384" 32.50 512 524 592 672 384 385 > 388 403 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D) > (II) S3VIRGE(0): Modeline "416x312" 28.64 416 432 464 576 312 312 > 314 333 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D) > (II) S3VIRGE(0): Modeline "400x300" 24.75 400 408 448 528 300 300 > 302 312 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D) > (II) S3VIRGE(0): Modeline "400x300" 25.00 400 428 488 520 300 318 > 321 333 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D) > (II) S3VIRGE(0): Modeline "400x300" 20.00 400 420 484 528 300 300 > 302 314 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D) > (II) S3VIRGE(0): Modeline "400x300" 18.00 400 412 448 512 300 300 > 301 312 doublescan +hsync +vsync > (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D) > (II) S3VIRGE(0): Modeline "320x240" 15.75 320 328 360 420 240 240 > 242 250 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D) > (II) S3VIRGE(0): Modeline "320x240" 15.75 320 332 352 416 240 244 > 245 260 doublescan -hsync -vsync > (**) S3VIRGE(0): Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D) > (II) S3VIRGE(0): Modeline "320x240" 12.60 320 328 376 400 240 245 > 246 262 doublescan -hsync -vsync > (++) S3VIRGE(0): DPI set to (100, 100) > (II) Loading sub module "fb" > (II) LoadModule: "fb" > (II) Loading /usr/X11R6/lib/modules/libfb.a > (II) Module fb: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.0.0 > ABI class: XFree86 ANSI C Emulation, version 0.2 > (II) Loading sub module "xaa" > (II) LoadModule: "xaa" > (II) Loading /usr/X11R6/lib/modules/libxaa.a > (II) Module xaa: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 1.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (II) Loading sub module "ramdac" > (II) LoadModule: "ramdac" > (II) Loading /usr/X11R6/lib/modules/libramdac.a > (II) Module ramdac: vendor="The XFree86 Project" > compiled for 4.3.0.1, module version = 0.1.0 > ABI class: XFree86 Video Driver, version 0.6 > (==) Depth 24 pixmap format is 32 bpp > (II) do I need RAC? No, I don't. > (II) resource ranges after preInit: > [0] 0 0 0xf0000000 - 0xf3ffffff (0x4000000) MS[B] > [1] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B) > [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B) > [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] > [4] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B] > [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] > [6] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O > [7] -1 0 0x000c0000 - 0x000cffff (0x10000) MX[B](B) > [8] -1 0 0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B) > [9] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD) > [10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD) > [11] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD) > [12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] > [13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B] > [14] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B] > [15] -1 0 0x0000b000 - 0x0000b003 (0x4) IX[B] > [16] -1 0 0x0000b400 - 0x0000b403 (0x4) IX[B] > [17] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B] > [18] -1 0 0x0000d000 - 0x0000d01f (0x20) IX[B] > [19] -1 0 0x0000d400 - 0x0000d41f (0x20) IX[B] > [20] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[B] > [21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU) > [22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU) > (==) S3VIRGE(0): Write-combining range (0xf0000000,0x400000) > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (II) S3VIRGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset > is 0x0000 > (**) S3VIRGE(0): Using FB > (II) S3VIRGE(0): Using XFree86 Acceleration Architecture (XAA) > Screen to screen bit blits > Solid filled rectangles > 8x8 mono pattern filled rectangles > CPU to Screen color expansion > Solid Horizontal and Vertical Lines > Image Writes > Offscreen Pixmaps > Setting up tile and stipple cache: > 16 128x128 slots > 4 256x256 slots > (==) S3VIRGE(0): Backing store disabled > (==) S3VIRGE(0): Silken mouse enabled > (**) Option "dpms" > (**) S3VIRGE(0): DPMS enabled > (==) RandR enabled > (II) Initializing built-in extension MIT-SHM > (II) Initializing built-in extension XInputExtension > (II) Initializing built-in extension XTEST > (II) Initializing built-in extension XKEYBOARD > (II) Initializing built-in extension LBX > (II) Initializing built-in extension XC-APPGROUP > (II) Initializing built-in extension SECURITY > (II) Initializing built-in extension XINERAMA > (II) Initializing built-in extension XFree86-Bigfont > (II) Initializing built-in extension RENDER > (II) Initializing built-in extension RANDR > (II) Keyboard "Generic Keyboard" handled by legacy driver > (**) Option "Protocol" "ImPS/2" > (**) Configured Mouse: Protocol: "ImPS/2" > (**) Configured Mouse: Core Pointer > (**) Option "Device" "/dev/input/mice" > (**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50 > (==) Configured Mouse: Buttons: 3 > (II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE) > (II) Configured Mouse: ps2EnableDataReporting: succeeded > Warning: font renderer for ".pcf" already registered at priority 0 > Warning: font renderer for ".pcf.Z" already registered at priority 0 > Warning: font renderer for ".pcf.gz" already registered at priority 0 > Warning: font renderer for ".snf" already registered at priority 0 > Warning: font renderer for ".snf.Z" already registered at priority 0 > Warning: font renderer for ".snf.gz" already registered at priority 0 > Warning: font renderer for ".bdf" already registered at priority 0 > Warning: font renderer for ".bdf.Z" already registered at priority 0 > Warning: font renderer for ".bdf.gz" already registered at priority 0 > Warning: font renderer for ".pmf" already registered at priority 0 > > ################################################################ > ################################################################ > #########Aqui termina o meu /var/log/XFree86.0.log############## > ################################################################ > ################################################################ > > ################################################################ > ################################################################ > #########Aqui inicia o meu XF86Config-4######################### > ################################################################ > ################################################################ > > # XF86Config-4 (XFree86 X Window System server configuration file) > # > # This file was generated by dexconf, the Debian X Configuration tool, using > # values from the debconf database. > # > # Edit this file with caution, and see the XF86Config-4 manual page. > # (Type "man XF86Config-4" at the shell prompt.) > # > # This file is automatically updated on xserver-xfree86 package upgrades > *only* > # if it has not been modified since the last upgrade of the xserver-xfree86 > # package. > # > # If you have edited this file but would like it to be automatically updated > # again, run the following commands as root: > # > # cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom > # md5sum /etc/X11/XF86Config-4 > /var/lib/xfree86/XF86Config-4.md5sum > # dpkg-reconfigure xserver-xfree86 > Section "Files" > FontPath "unix/:7100" # local font server > # if the local font server has problems, we can fall back on these > FontPath "/usr/lib/X11/fonts/misc" > FontPath "/usr/lib/X11/fonts/cyrillic" > FontPath "/usr/lib/X11/fonts/100dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/75dpi/:unscaled" > FontPath "/usr/lib/X11/fonts/Type1" > FontPath "/usr/lib/X11/fonts/CID" > FontPath "/usr/lib/X11/fonts/Speedo" > FontPath "/usr/lib/X11/fonts/100dpi" > FontPath "/usr/lib/X11/fonts/75dpi" > EndSection > Section "Module" > Load "GLcore" > Load "bitmap" > Load "dbe" > Load "ddc" > Load "dri" > Load "extmod" > Load "freetype" > Load "glx" > Load "int10" > Load "record" > Load "speedo" > Load "type1" > Load "vbe" > EndSection > Section "InputDevice" > Identifier "Generic Keyboard" > Driver "keyboard" > Option "CoreKeyboard" > Option "XkbRules" "xfree86" > Option "XkbModel" "pc104" > Option "XkbLayout" "us_intl" > EndSection > Section "InputDevice" > Identifier "Configured Mouse" > Driver "mouse" > Option "CorePointer" > Option "Device" "/dev/input/mice" > Option "Protocol" "ImPS/2" > EndSection > Section "Device" > Identifier "S3 Inc. 86c988 [ViRGE/VX]" > Driver "s3virge" > EndSection > Section "Monitor" > Identifier "Generic Monitor" > HorizSync 30-60 > VertRefresh 50-75 > Option "DPMS" > EndSection > Section "Screen" > Identifier "Default Screen" > Device "S3 Inc. 86c988 [ViRGE/VX]" > Monitor "Generic Monitor" > DefaultDepth 24 > SubSection "Display" > Depth 1 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 4 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 8 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 15 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 16 > Modes "1024x768" "800x600" "640x480" > EndSubSection > SubSection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > EndSubSection > EndSection > Section "ServerLayout" > Identifier "Default Layout" > Screen "Default Screen" > InputDevice "Generic Keyboard" > InputDevice "Configured Mouse" > EndSection > Section "DRI" > Mode 0666 > EndSection > > ################################################################ > ################################################################ > #########Aqui termina o meu XF86Config-4######################## > ################################################################ > ################################################################ > > > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >