Salve povo. Estou com o Debian Etch e Kernel 2.4.31, que compilei na mão. Meus discos estão dispostos da seguinte forma:
Primary Master (hda): SAMSUNG SP4002H 40GiB UDMA 2 Secondary Master (hdb): Maxtor 2B020H1 20GiB UDMA 2 Primary Slave (hdc): QUANTUM FIREBALLlct20 30GiB UDMA 2 Secondary Slave (hdd): hdd: HL-DT-ST DVDRAM GSA-4163B UDMA 2 Durante o boot (e as vezes quando o computador está em funcionamento) eu recebo a seguinte mensagem: hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdc: DMA disabled Quando deu essa mensagem da primeira vez, eu mudei o UDMA do hdc, que estava com 5, para 2. Achei que iria funcionar, mas continuou dando esse erro. Achei que poderia ser o flat cable, bem, troquei-o, mas não resolveu. Tudo funciona normalmente, o computador não trava, só que as vezes esse erro ocorre. Consigo gravar CDs e DVDs normalmente, sem nenhm problema. Qual será a razão desse erro? Será que o meu Quantum foi pro saco? Será o flat cable? Alguém já teve algum erro parecido? Agradeço qualquer colaboração e desde já me desculpo por ser OFF-TOPIC. Abraços, Gustavo PS. Segue o meu dmesg: Linux version 2.4.31 ([EMAIL PROTECTED]) (gcc version 3.3.5 (Debian 1:3.3.5-13)) #5 Mon Jul 18 20:19:33 BRT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 0000000017ffc000 (usable) BIOS-e820: 0000000017ffc000 - 0000000017fff000 (ACPI data) BIOS-e820: 0000000017fff000 - 0000000018000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 383MB LOWMEM available. On node 0 totalpages: 98300 zone(0): 4096 pages. zone(1): 94204 pages. zone(2): 0 pages. ACPI: RSDP (v000 ASUS ) @ 0x000f6810 ACPI: RSDT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc000 ACPI: FADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc100 ACPI: BOOT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc040 ACPI: MADT (v001 ASUS P4S333 0x42302e31 MSFT 0x31313031) @ 0x17ffc080 ACPI: DSDT (v001 ASUS P4S333 0x00001000 MSFT 0x0100000b) @ 0x00000000 Kernel command line: auto BOOT_IMAGE=Linux2431 ro root=301 hdd=ide-scsi ide_setup: hdd=ide-scsi Initializing CPU#0 Detected 1715.282 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 3420.97 BogoMIPS Memory: 385888k/393200k available (1708k kernel code, 6924k reserved, 598k data, 96k init, 0k highmem) Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) Inode cache hash table entries: 32768 (order: 6, 262144 bytes) Mount cache hash table entries: 512 (order: 0, 4096 bytes) Buffer cache hash table entries: 32768 (order: 5, 131072 bytes) Page-cache hash table entries: 131072 (order: 7, 524288 bytes) CPU: Trace cache: 12K uops, L1 D cache: 8K CPU: L2 cache: 256K Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: After generic, caps: 3febfbff 00000000 00000000 00000000 CPU: Common caps: 3febfbff 00000000 00000000 00000000 CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz stepping 02 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ACPI: IRQ9 SCI: Level Trigger. POSIX conformance testing by UNIFIX ACPI: Subsystem revision 20040326 PCI: PCI BIOS revision 2.10 entry at 0xf1580, last bus=1 PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: System [ACPI] (supports S0 S1 S4 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *9 ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] PCI: Probing PCI hardware ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11 ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 PCI: Using ACPI for IRQ routing isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Journalled Block Device driver loaded devfs: v1.12c (20020818) Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x1 ACPI: Power Button (FF) [PWRF] ACPI: Processor [CPU0] (supports C1) pty: 256 Unix98 ptys configured Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI ISAPNP enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pd: pd version 1.05, major 45, cluster 64, nice 0 kmod: failed to exec /sbin/modprobe -s -k paride_protocol, errno = 2 pda: Autoprobe failed pd: no valid drive found pcd: pcd version 1.07, major 46, nice 0 kmod: failed to exec /sbin/modprobe -s -k paride_protocol, errno = 2 pcd0: Autoprobe failed pcd: No CD-ROM drive found pf: pf version 1.04, major 47, cluster 64, nice 0 kmod: failed to exec /sbin/modprobe -s -k paride_protocol, errno = 2 pf0: Autoprobe failed pf: No ATAPI disk detected pt: pt version 1.04, major 96 kmod: failed to exec /sbin/modprobe -s -k paride_protocol, errno = 2 pt0: Autoprobe failed pt: No ATAPI tape drive detected pg: pg version 1.02, major 97 kmod: failed to exec /sbin/modprobe -s -k paride_protocol, errno = 2 pg0: Autoprobe failed pg: No ATAPI device detected Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 loop: loaded (max 8 devices) Linux agpgart interface v0.99 (c) Jeff Hartmann agpgart: Maximum main memory to use for agp memory: 321M agpgart: unsupported bridge agpgart: no supported devices found. Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 00:02.5 SIS5513: chipset revision 208 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 961 MuTIOL IDE UDMA100 controller ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SP4002H, ATA DISK drive hdb: Maxtor 2B020H1, ATA DISK drive blk: queue c038e320, I/O limit 4095Mb (mask 0xffffffff) blk: queue c038e45c, I/O limit 4095Mb (mask 0xffffffff) hdc: QUANTUM FIREBALLlct20 30, ATA DISK drive hdd: HL-DT-ST DVDRAM GSA-4163B, ATAPI CD/DVD-ROM drive blk: queue c038e774, I/O limit 4095Mb (mask 0xffffffff) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: attached ide-disk driver. hda: host protected area => 1 hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=4870/255/63, UDMA(33) hdb: attached ide-disk driver. hdb: host protected area => 1 hdb: 40020624 sectors (20491 MB) w/2048KiB Cache, CHS=2491/255/63, UDMA(33) hdc: attached ide-disk driver. hdc: host protected area => 1 hdc: 58633344 sectors (30020 MB) w/418KiB Cache, CHS=58168/16/63, UDMA(100) Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 /dev/ide/host0/bus0/target1/lun0: p1 p2 /dev/ide/host0/bus1/target0/lun0: [PTBL] [3649/255/63] p1 p2 SCSI subsystem driver Revision: 1.00 i2c-core.o: i2c core module version 2.9.1 (20050412) i2c-dev.o: i2c /dev entries driver module version 2.9.1 (20050412) i2c-proc.o version 2.9.1 (20050412) usb.c: registered new driver hub Initializing USB Mass Storage driver... usb.c: registered new driver usb-storage USB Mass Storage support registered. Linux video capture interface: v1.00 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4 acpiphp_glue: can't get bus number, assuming 0 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Mounted devfs on /dev Freeing unused kernel memory: 96k freed Adding Swap: 538168k swap-space (priority -1) Adding Swap: 473908k swap-space (priority -2) Adding Swap: 498004k swap-space (priority -3) EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,2), internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,1), internal journal EXT3-fs: mounted filesystem with ordered data mode. 8139too Fast Ethernet driver 0.9.26 eth0: RealTek RTL8139 at 0xd88ea000, 00:e0:7d:de:ab:6c, IRQ 10 eth0: Identified 8139 chip type 'RTL-8100B/8139D' hdd: attached ide-scsi driver. scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: DVDRAM GSA-4163B Rev: A103 Type: CD-ROM ANSI SCSI revision: 02 Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Creative EMU10K1 PCI Audio Driver, version 0.20, 20:26:15 Jul 18 2005 emu10k1: EMU10K1 rev 10 model 0x8022 found, IO at 0xa000-0xa01f, IRQ 5 ac97_codec: AC97 Audio codec, id: CRY20 (Cirrus Logic CS4297A rev B) usb-ohci.c: USB OHCI at membase 0xd890c000, IRQ 11 usb-ohci.c: usb-00:02.2, Silicon Integrated Systems [SiS] USB 1.0 Controller usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 3 ports detected usb-ohci.c: USB OHCI at membase 0xd890e000, IRQ 10 usb-ohci.c: usb-00:02.3, Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 3 ports detected rivatv: Video4Linux driver for NVIDIA cards rivatv: Version 0.8.5 rivatv: MMX processor extension enabled rivatv: nVidia card found - rivatv0 rivatv: It is impossible to identify your board uniquely, sorry rivatv: PCI identifiers: 10DE 0110 0000 0000 rivatv: Attempting to load most common decoder (SAA7108E) rivatv: PCI nVidia NV10 card detected (GeForce2 MX [0x110], 64MB @ 0xF0000000) rivatv: I2C adapter driver for NVIDIA cards i2c-dev.o: Registered 'NVIDIA display adapter bus 1' as minor 0 i2c-dev.o: Registered 'NVIDIA display adapter bus 0' as minor 1 rivatv: procfs file registered for rivatv0 rivatv: allocated YUV capture buffer (812 kb) rivatv: AGPGART: chipset not supported rivatv: AGP: disabled rivatv: Hash table layout: 4kB (9 bits) @ 0xE7710000 rivatv: No additional driver detected rivatv: PFIFO and PGRAPH disabled, enabling... rivatv: Setting up instance RAM for DMA rivatv: DMA transfers disabled rivatv: PMEDIA, PVIDEO and PFB disabled, enabling... rivatv: successfully requested IRQ 11 rivatv: Video4Linux device driver registered gameport0: Emu10k1 Gameport at 0x9800 size 8 speed 1011 kHz eth0: link up, 10Mbps, half-duplex, lpa 0x0000 i2c-sis645.o version 2.9.1 (20050412) i2c-sis645: Attempting to enable SiS645 SMBus device i2c-sis645: Found SiS south bridge in compatability mode(?) ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 PCI device 1039:0016: SiS645 SMBus base address: 0xe600 i2c-dev.o: Registered 'SiS645 SMBus adapter at 0xe600' as minor 2 i2c-isa.o version 2.9.1 (20050412) i2c-dev.o: Registered 'ISA main adapter' as minor 3 asb100.o version 2.9.1 (20050412) eeprom.o version 2.9.1 (20050412) i2c-core.o: warning: client_register seems to have failed for client 50 at adapter NVIDIA display adapter bus 0 sis5595.o version 2.9.1 (20050412) sis5595.o: Error: Looked for SIS5595 but found unsupported device 0645 hdc: DMA disabled hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error } hdc: dma_intr: error=0x84 { DriveStatusError BadCRC } ide1: reset: success hdc: DMA disabled