Vereis, tengo una placa base con 10 puertos (8 traseros y 2 delanteros) Usb 2.0 pero se reconocen solo 4.
Si cargo el modulo ohci, salen 10 puertos 1.1 y con el ehci solo 4 (2.0).
como puedo hacer para poner los 10 a 2.0?. En teoria todos son 2.0 (proteste en la tienda donde la compré, cargaron el otro SO, y efectivamente todos funcionaban a la vez)
pego el lspci:
[EMAIL PROTECTED]:/usr/src/linux$ lspci |grep USB
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 005a (rev a2)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 005b (rev a3)
pego tambien la salida de dmesg:
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:02.0: PCI device 10de:005a (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 21, pci mem 0xf4003000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected usb 1-3: new full speed USB device using ohci_hcd and address 2 Initializing USB Mass Storage driver... ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:02.1: PCI device 10de:005b (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 20, pci mem 0xf4005000 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 usb 1-3: string descriptor 0 read error: -110 usb 1-3: string descriptor 0 read error: -110 usb 1-3: string descriptor 0 read error: -110 scsi8 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 1-3: USB disconnect, address 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 4 ports detected usb 2-3: new high speed USB device using ehci_hcd and address 2
-- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]