Saludos. Primero felicidades a todos por la lista, ayuda a resolver problemas que todos de una o de otra forma hemos tenido, aparte de tenernos informados sobre situaciones que a lo mejor no se nos ha dado pero se nos puede dar.
Mi caso es nuevo, para mi por lo menos, tengo una mini-dv camara panasonic.( off-topic: de disney paris con mi mujer y niƱas, nos lo hemos pasado pipa ). bueno esta camara tiene salida para firewire. y ni corto ni perezoso la he conectado a mi recien instalada debian -sarge con kernel 2.6. Despues de bichear por google, etc... instalo kino y dvgrab para intentar capturar las cintas desde la camara pero nada de nada Situacion: - haciendo un lsmod , dice que tengo cargado raw1394,dv1394, ohci1394, con lo que creo que lo tengo cargado. - de todas formas hago un modprobe de cada uno de ellos por si acaso - en kino dice que ieee no esta cargado , o que no tengo permisos.tengo dos opciones de drivers raw1394 y dev1394 pero no /dev/ no estan ninguno de estos dos dispositivos - para evitar problemas de permisos lo hago todo como root. total he intentado varias cosas pero nada de nada. no se me ocurrre nada mas alguna idea ? Gracias a todos por vuestro tiempo y por vuestro interes. os envio los ficheros lsmod y dmesg para que os hagais una idea de la situacion.
Module Size Used by ipv6 262468 8 parport_pc 36932 0 parport 41544 1 parport_pc pcspkr 3688 0 rtc 12728 0 snd_via82xx 29604 0 snd_ac97_codec 69508 1 snd_via82xx gameport 4736 1 snd_via82xx snd_mpu401_uart 8000 1 snd_via82xx usb_storage 68800 0 pci_hotplug 34352 0 via_agp 9088 1 agpgart 34536 1 via_agp ehci_hcd 31364 0 snd_usb_audio 72608 0 snd_rawmidi 25316 2 snd_mpu401_uart,snd_usb_audio snd_seq_device 8264 1 snd_rawmidi snd_pcm 97480 2 snd_via82xx,snd_usb_audio snd_page_alloc 11720 2 snd_via82xx,snd_pcm snd_timer 25668 1 snd_pcm snd 57380 8 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_usb_audio,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer audio 48064 1 eth1394 21768 0 raw1394 31596 0 dv1394 21452 0 uhci_hcd 32784 0 usbcore 118308 7 usb_storage,ehci_hcd,snd_usb_audio,audio,uhci_hcd via82cxxx_audio 30280 1 uart401 11844 1 via82cxxx_audio sound 83372 2 via82cxxx_audio,uart401 soundcore 10400 6 snd,audio,via82cxxx_audio,sound ac97_codec 18700 1 via82cxxx_audio via_rhine 21640 0 mii 5184 1 via_rhine via_ircc 26448 0 irda 195712 1 via_ircc crc_ccitt 2176 1 irda ohci1394 35588 1 dv1394 tsdev 7360 0 capability 4616 0 commoncap 7296 1 capability sr_mod 17444 0 mousedev 10444 1 sd_mod 21696 0 evdev 9600 0 sbp2 24328 0 scsi_mod 124812 4 usb_storage,sr_mod,sd_mod,sbp2 ieee1394 111352 5 eth1394,raw1394,dv1394,ohci1394,sbp2 psmouse 20232 0 ide_cd 42528 0 cdrom 40284 2 sr_mod,ide_cd ext3 126760 3 jbd 61848 1 ext3 mbcache 9284 1 ext3 ide_generic 1472 0 via82cxxx 13980 1 ide_disk 19264 6 ide_core 138724 5 usb_storage,ide_cd,ide_generic,via82cxxx,ide_disk unix 28660 449 font 8448 0 vesafb 6688 0 cfbcopyarea 3840 1 vesafb cfbimgblt 3072 1 vesafb cfbfillrect 3712 1 vesafb
on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 2-0, 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected. ..TIMER: vector=0x31 pin1=2 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1792.0367 MHz. ..... host bus clock speed is 265.0536 MHz. checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4496k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfaa70, last bus=1 PCI: Using configuration type 1 mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5 ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 6 7 10 11 12) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled. ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fb510 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xb540, dseg 0xf0000 PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 169 ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21 ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 177 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20 ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22 ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 ACPI: PCI Interrupt Link [ALKD] BIOS reported IRQ 0, using IRQ 23 ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00178003 ....... : max redirection entries: 0017 ....... : PRQ implemented: 1 ....... : IO APIC version: 0003 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 31 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 0 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 1 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 D1 11 001 01 1 1 0 1 0 1 1 A9 12 000 00 1 0 0 0 0 0 0 00 13 000 00 1 0 0 0 0 0 0 00 14 001 01 1 1 0 1 0 1 1 B9 15 001 01 1 1 0 1 0 1 1 B1 16 001 01 1 1 0 1 0 1 1 C1 17 001 01 1 1 0 1 0 1 1 C9 Using vector-based indexing IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ209 -> 0:16 IRQ169 -> 0:17 IRQ185 -> 0:20 IRQ177 -> 0:21 IRQ193 -> 0:22 IRQ201 -> 0:23 .................................... done. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 1 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1 PCI: Via IRQ fixup for 0000:00:11.5, from 10 to 1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4496 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 148k freed vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI interrupt 0000:00:11.1[A] -> GSI 20 (level, low) -> IRQ 185 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:DMA, hdd:pio hda: ST380011A, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 1024KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 > p4 hdc: _NEC DVD_RW ND-2510A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Adding 497972k swap on /dev/hda5. Priority:-1 extents:1 Adding 538104k swap on /dev/hda6. Priority:-2 extents:1 EXT3 FS on hda4, internal journal hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 ieee1394: Initialized config rom entry `ip1394' SCSI subsystem initialized sbp2: $Rev: 1219 $ Ben Collins <[EMAIL PROTECTED]> mice: PS/2 mouse device common for all mice Capability LSM initialized ts: Compaq touchscreen protocol output kjournald starting. Commit interval 5 seconds EXT3 FS on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hda2, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]> ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 17 (level, low) -> IRQ 169 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[169] MMIO=[de000000-de0007ff] Max Packet=[2048] irda_init() NET: Registered protocol family 23 via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201 eth0: VIA Rhine II at 0xec00, 00:0d:87:3e:11:56, IRQ 201. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1. Via 686a/8233/8235 audio driver 1.9.1-ac4-2.5 ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193 via82cxxx: Six channel audio available PCI: Setting latency timer of device 0000:00:11.5 to 64 ac97_codec: AC97 codec, id: ALG96 (Unknown) via82cxxx: Codec rate locked at 48Khz via82cxxx: board #1 at 0xE400, IRQ 193 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177 uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:10.0: irq 177, io base 0000d400 uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 177 uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:10.1: irq 177, io base 0000d800 uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 177 uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3) uhci_hcd 0000:00:10.2: irq 177, io base 0000dc00 uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ieee1394: Node added: ID:BUS[0-00:1023] GUID[00804580b148b165] ieee1394: Host added: ID:BUS[0-01:1023] GUID[00000ae6ff097336] ieee1394: raw1394: /dev/raw1394 device initialized usb 1-2: new full speed USB device using address 2 ip1394: $Rev: 1224 $ Ben Collins <[EMAIL PROTECTED]> ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) usbaudio: device 2 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces usbaudio: device 2 interface 2 altsetting 0 FORMAT_TYPE descriptor not found usbaudio: valid input sample rate 8000 usbaudio: valid input sample rate 22050 usbaudio: valid input sample rate 16000 usbaudio: valid input sample rate 11025 usbaudio: device 2 interface 2 altsetting 1: format 0x00000010 sratelo 8000 sratehi 22050 attributes 0x01 usbaudio: registered dsp 14,19 usbaudio: constructing mixer for Terminal 3 type 0x0101 usbaudio: warning: found 1 of 0 logical channels. usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine. usbaudio: registered mixer 14,16 usb_audio_parsecontrol: usb_audio_state at dc8c72a0 usbcore: registered new driver audio drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver usbcore: registered new driver snd-usb-audio usb 3-1: new full speed USB device using address 2 ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 177 ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 0000:00:10.3: irq 177, pci mem dead5000 ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 usb 3-1: device descriptor read/all, error -71 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected usb 1-2: USB disconnect, address 2 usbaudio: unregister dsp 14,19 usbaudio: unregister mixer 14,16 hub 4-0:1.0: over-current change on port 5 hub 4-0:1.0: over-current change on port 6 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected VIA KM400/KM400A chipset agpgart: Maximum main memory to use for agp memory: 409M agpgart: AGP aperture is 128M @ 0xd0000000 usb 1-2: new full speed USB device using address 3 usbaudio: device 3 audiocontrol interface 1 has 1 input and 0 output AudioStreaming interfaces usbaudio: device 3 interface 2 altsetting 0 FORMAT_TYPE descriptor not found usbaudio: valid input sample rate 8000 usbaudio: valid input sample rate 22050 usbaudio: valid input sample rate 16000 usbaudio: valid input sample rate 11025 usbaudio: device 3 interface 2 altsetting 1: format 0x00000010 sratelo 8000 sratehi 22050 attributes 0x01 usbaudio: registered dsp 14,19 usbaudio: constructing mixer for Terminal 3 type 0x0101 usbaudio: warning: found 1 of 0 logical channels. usbaudio: assuming the channel found is the master channel (got a Philips camera?). Should be fine. usbaudio: registered mixer 14,16 usb_audio_parsecontrol: usb_audio_state at dc913420 usb 3-1: new full speed USB device using address 4 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices Vendor: IC Model: USB Storage-CFC Rev: 301b Type: Direct-Access ANSI SCSI revision: 02 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 Vendor: IC Model: USB Storage-SMC Rev: 301b Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdb at scsi0, channel 0, id 0, lun 1 Vendor: IC Model: USB Storage-MMC Rev: 301b Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdc at scsi0, channel 0, id 0, lun 2 Vendor: IC Model: USB Storage-MSC Rev: 301b Type: Direct-Access ANSI SCSI revision: 02 Attached scsi removable disk sdd at scsi0, channel 0, id 0, lun 3 USB Mass Storage device found at 4 usbcore: registered new driver usb-storage USB Mass Storage support registered. Real Time Clock Driver v1.12 input: PC Speaker parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] eth0: Setting full-duplex based on MII #1 link partner capability of 41e1. NET: Registered protocol family 10 Disabled Privacy Extensions on device c02fc1a0(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present