Daniel Garcia wrote:
Buenos días,
Estoy utilizando la debian testing y he descargado el driver para
touchpad synaptics. He seguido las instrucciones del README.Debian y he
puesto Load synaptics y:
Section "InputDevice"
Driver "synaptics"
Option "SendCoreEvents" "true"
Identifier "Synaptics Touchpad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "AccelFactor" "0.0010"
Option "SHMConfig" "on"
EndSection
El touchpad funciona así como el ratón USB que tengo a mayores, pero no
funciona como en Windows, con la aceleración y tampoco funciona que le
de un golpe y sea como si hubiera dado un click. He probado varios
AccelFactor y sigue practicamente igual.
Alguna idea?
cuando hago synclient -l obtengo:
Parameter settings:
LeftEdge = 1900
RightEdge = 5400
TopEdge = 1900
BottomEdge = 4000
FingerLow = 25
FingerHigh = 30
MaxTapTime = 180
MaxTapMove = 220
MaxDoubleTapTime = 180
ClickTime = 100
FastTaps = 0
EmulateMidButtonTime = 75
VertScrollDelta = 100
HorizScrollDelta = 100
MinSpeed = 0.09
MaxSpeed = 0.18
AccelFactor = 0.0015
EdgeMotionMinZ = 30
EdgeMotionMaxZ = 160
EdgeMotionMinSpeed = 1
EdgeMotionMaxSpeed = 400
EdgeMotionUseAlways = 0
UpDownScrolling = 1
LeftRightScrolling = 1
UpDownRepeat = 1
LeftRightRepeat = 1
ScrollButtonRepeat = 100
TouchpadOff = 0
GuestMouseOff = 0
LockedDrags = 0
RTCornerButton = 2
RBCornerButton = 3
LTCornerButton = 0
LBCornerButton = 0
TapButton1 = 1
TapButton2 = 2
TapButton3 = 3
CircularScrolling = 0
CircScrollDelta = 0.1
CircScrollTrigger = 0
CircularPad = 0
PalmDetect = 1
PalmMinWidth = 10
PalmMinZ = 200
CoastingSpeed = 0
Muchas gracias
Daniel
Yo lo eche a andar con las instrucciones de esta página de bulma, a lo
mejor te valen:
http://bulma.net/body.phtml?nIdNoticia=1823
Un saludo.
Marcos Delgado.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]