Bueno os pongo la salida del dmesg: DebianWolve:/etc# dmesg Linux version 2.6.15.2.010206 ([EMAIL PROTECTED]) (gcc versión 3.3.6 (Debian 1:3.3.6-12)) #1 Wed Feb 1 22:03:17 CET 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) Warning only 896MB will be used. Use a HIGHMEM enabled kernel. 896MB LOWMEM available. found SMP MP-table at 000f52f0 On node 0 totalpages: 229376 DMA zone: 4096 pages, LIFO batch:0 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 225280 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:0 DMI 2.3 present. Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 Processor #0 15:4 APIC version 17 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 1 Allocating PCI resources starting at 50000000 (gap: 40000000:90000000) Built 1 zonelists Kernel command line: root=/dev/hda5 ro mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3216.122 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 906056k/917504k available (1061k kernel code, 10884k reserved, 426k data, 200k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 6440.39 BogoMIPS (lpj=12880786) Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000 mtrr: v2.0 (20020519) CPU: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 01 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. ExtINT not setup in hardware but reported by MP table ENABLING IO-APIC IRQs .TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0 checking if image is initramfs... it is Freeing initrd memory: 1019k freed NET: Registered protocol family 16 EISA bus registered PCI: PCI BIOS revision 3.00 entry at 0xfb330, last bus=4 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2 Boot video device is 0000:01:00.0 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus ff [IRQ] PCI: Using IRQ router PIIX/ICH [8086/2640] at 0000:00:1f.0 PCI->APIC IRQ transform: 0000:00:01.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1c.3[D] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18 PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16 PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23 PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19 PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 16 PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 19 PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 21 PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 22 PCI->APIC IRQ transform: 0000:04:07.0[A] -> IRQ 23 PCI: Bridge: 0000:00:01.0 IO window: a000-afff MEM window: f0000000-f1ffffff PREFETCH window: e0000000-efffffff PCI: Bridge: 0000:00:1c.0 IO window: 7000-7fff MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.3 IO window: disabled. MEM window: f4000000-f40fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 8000-9fff MEM window: f2000000-f3ffffff PREFETCH window: 50000000-500fffff PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:1c.0 to 64 PCI: Setting latency timer of device 0000:00:1c.3 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard as /class/input/input0 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 7, 524288 bytes) TCP bind hash table entries: 65536 (order: 6, 262144 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode Freeing unused kernel memory: 200k freed Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... input: PS2++ Logitech MX Mouse as /class/input/input1 hda: Maxtor 6B200M0, ATA DISK drive Probing IDE interface ide1... hdc: SONY DVD RW DW-D22A, ATAPI CD/DVD-ROM drive hdd: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 398297088 sectors (203928 MB) w/8192KiB Cache, CHS=24792/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. NET: Registered protocol family 1 ohci1394: $Rev: 1313 $ Ben Collins <[EMAIL PROTECTED]> ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f3008000-f30087ff] Max Packet=[4096] eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State tg3.c:v3.43b (Oct 24, 2005) PCI: Setting latency timer of device 0000:03:00.0 to 64 eth1: Tigon3 [partno(BCM95751) rev 4001 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:0f:ea:39:94:76 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[000fea56003c2640] Adding 2626588k swap on /dev/hda6. Priority:-1 extents:1 across:2626588k EXT3 FS on hda5, internal journal hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache snd: disagrees about version of symbol struct_module pci_hotplug: PCI Hot Plug PCI Core version: 0.5 usbcore: registered new driver usbfs usbcore: registered new driver hub usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver usbcore: registered new driver usbkbd drivers/usb/input/usbkbd.c: :USB HID Boot Protocol keyboard driver usbcore: registered new driver wacom drivers/usb/input/wacom.c: v1.44:USB Wacom Graphire and Wacom Intuos tablet driver SCSI subsystem initialized Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. NET: Registered protocol family 3 NET: Registered protocol family 6 G4KLX NET/ROM for Linux. Version 0.7 for AX25.037 Linux 2.4 NTFS driver 2.1.25 [Flags: R/O MODULE]. NTFS volume version 3.1. tg3: eth1: Link is up at 100 Mbps, full duplex. tg3: eth1: Flow control is on for TX and on for RX. NET: Registered protocol family 10 ADDRCONF(NETDEV_UP): eth0: link is not ready IPv6 over IPv4 tunneling driver eth1: no IPv6 routers present tg3: eth1: Link is down. eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: network connection down ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present eth0: network connection down ADDRCONF(NETDEV_UP): eth0: link is not ready eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready eth0: no IPv6 routers present
Ahora el fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc defaults 0 0 /dev/hda5 / ext3 defaults,errors=remount-ro 0 1 /dev/hda6 none swap sw 0 0 /dev/hdc /media/cdrom0 iso9660 ro,user,noauto 0 0 /dev/hdd /media/cdrom1 iso9660 ro,user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/hda1 /mnt/windows ntfs umask=0,rw 0 0 /dev/sdb /mnt/pendrive vfat rw,exec,users 0 0 Un lsmod: ebianWolve:/etc# lsmod Module Size Used by vfat 11912 - fat 46468 - reiserfs 208272 - autofs 14216 - ipv6 212512 - nls_cp437 5672 - ntfs 92816 - netrom 39840 - ax25 51744 - usb_storage 55680 - scsi_mod 134984 - wacom 14440 - usbkbd 6664 - usbhid 34848 - usbcore 116068 - atyfb 31876 - cfbcopyarea 3560 - cfbimgblt 2824 - cfbfillrect 3720 - pci_hotplug 9676 - soundcore 8928 - ide_cd 38372 - cdrom 36192 - tg3 89420 - joydev 9216 - sk98lin 148320 - ohci1394 31708 - ieee1394 91732 - unix 24656 - ext3 119184 - jbd 50300 - mbcache 8780 - ide_disk 15848 - ide_generic 1256 - ide_core 115552 - evdev 9088 - El dmesg lo he hecho con el pendrive puesto en un puerto usb.Gracias amigos.espero que al final pueda montar el pendrive.(en windows funciona, asi que no es que el pendrive esté mal)