Gracias por vuestras respuestas. >Serias tan amables de explicar un poquito mejor a que te estas refiriendo?
Veamos tengo un servidor freeradius y en el fichero eap.conf tengo: ## EAP-TLS tls { private_key_password = XXXXXXX private_key_file = ${raddbdir}/certs/cert-srv.pem certificate_file = ${raddbdir}/certs/cert-srv.pem CA_file = ${raddbdir}/certs/demoCA/cacert.pem dh_file = ${raddbdir}/certs/dh random_file = ${raddbdir}/certs/random fragment_size = 1024 include_length = yes check_cert_cn = %{User-Name} } El siguiente paso sera configurar el cliente linux, ya que los cliente W tengo unos certificado que tengo que instalarlos. > sabeis que driver o aplicaciĆ³n tengo que utilizar para poder instalar la > tarjeta linksys WMP54G en debian sarge al final lo he montado con ndiswrapper: ndiswrapper -l Installed ndis drivers: bcmwl5 driver present, hardware present wlan0 IEEE 802.11g ESSID:off/any Mode:Managed Frequency:2.462 GHz Access Point: 00:00:00:00:00:00 Bit Rate:54 Mb/s Tx-Power:16 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:100/100 Signal level:-10 dBm Noise level:-256 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:113690 Missed beacon:0 iwlist wlan0 scan Cell 01 - Address: 00:14:BF:72:FD:28 ESSID:"wifi" Protocol:IEEE 802.11b Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:0/100 Signal level:-43 dBm Noise level:-256 dBm Encryption key:on Bit Rate:1 Mb/s Bit Rate:2 Mb/s Bit Rate:5.5 Mb/s Bit Rate:11 Mb/s Bit Rate:18 Mb/s Bit Rate:24 Mb/s Bit Rate:36 Mb/s Bit Rate:54 Mb/s Bit Rate:6 Mb/s Bit Rate:9 Mb/s Bit Rate:12 Mb/s Bit Rate:48 Mb/s Extra:bcn_int=100 Extra:atim=0 wpa_ie=dd180050f20101000050f20201000050f20201000050f2010000 En cual fichero tengo que configurar todo esto? Gracias por todo. Un saludo. S.V. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]