El Viernes, 9 de Junio de 2006 13:10, ChEnChO escribió: > 2006/6/10, Enrique Jiménez Campos <[EMAIL PROTECTED]>: > > Estoy bastante molesto al no poder usar la potencia de mi portatil al > > 100%, resulta que tengo la tarjeta grafica integrada en placa ( Intel > > 82852/855GM Integrated Graphics 64 mb ), me he bajado los siguientes > > script y los he ejecutado: > > > > - common-20060309-linux.i386 > > - i915-20060313-linux.i386 > > > > Estos son los driver que "en teoria" son los que debo ejecutar(segun un > > howto en google). > > una vez hecho esto cargo los modulos con : > > > > modprobe i915 drm > > > > reinicio kdm y nada el glxgears va muy lento, creo que es por usar xorg > > xq sin embargo con knoppix y xfree me reconocia la aceleracion > > automaticamente, > > knoppix y xfree != debian y xorg 7.0 > > > Aqui les pongo la salida de lspci, lsmod y el fichero xorg.conf: > > > > $ lspci > > > > > > 0000:00:02.0 VGA compatible controller: Intel Corp. 82852/855GM > > Integrated Graphics Device (rev 02) > > > > > > $ lsmod > > > > Module Size Used by > > ipv6 229504 8 > > pcmcia 35580 2 > > nls_iso8859_1 4160 1 > > nls_cp437 5824 1 > > vfat 11936 1 > > fat 47516 1 vfat > > dm_mod 49204 0 > > i915 18368 0 > > drm 67576 1 i915 > > acerhk 25960 0 > > sr_mod 16100 0 > > sbp2 19876 0 > > scsi_mod 124236 2 sr_mod,sbp2 > > ide_generic 1344 0 [permanent] > > shpchp 39904 0 > > pci_hotplug 25020 1 shpchp > > joydev 9088 0 > > ipw2200 102284 0 > > i2c_i801 8172 0 > > snd_intel8x0m 15852 0 > > snd_pcm_oss 44224 0 > > snd_mixer_oss 15904 1 snd_pcm_oss > > snd_intel8x0 30172 3 > > snd_ac97_codec 83264 2 snd_intel8x0m,snd_intel8x0 > > snd_ac97_bus 2304 1 snd_ac97_codec > > ieee80211 28360 1 ipw2200 > > ieee80211_crypt 5952 1 ieee80211 > > i2c_core 19840 1 i2c_i801 > > intel_agp 21084 1 > > agpgart 29864 3 drm,intel_agp > > snd_pcm 77060 5 > > snd_intel8x0m,snd_pcm_oss,snd_intel8x0,snd_ac97_codec > > snd_timer 21636 2 snd_pcm > > snd 48384 11 > > snd_intel8x0m,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_p > >cm,snd_timer eth1394 19044 0 > > yenta_socket 23916 2 > > rsrc_nonstatic 12096 1 yenta_socket > > pcmcia_core 38228 3 pcmcia,yenta_socket,rsrc_nonstatic > > evdev 8992 0 > > mousedev 10880 1 > > tsdev 7456 0 > > firmware_class 9824 2 pcmcia,ipw2200 > > soundcore 9216 1 snd > > psmouse 34664 0 > > wbsd 16936 0 > > mmc_core 22944 1 wbsd > > rtc 12532 0 > > snd_page_alloc 10024 3 snd_intel8x0m,snd_intel8x0,snd_pcm > > serio_raw 6916 0 > > parport_pc 32336 0 > > parport 33192 1 parport_pc > > ext3 121192 1 > > jbd 51412 1 ext3 > > mbcache 8292 1 ext3 > > usbhid 33088 0 > > ide_cd 35936 0 > > cdrom 32336 2 sr_mod,ide_cd > > ide_disk 14816 4 > > ehci_hcd 28168 0 > > uhci_hcd 28048 0 > > piix 9444 0 [permanent] > > generic 4388 0 [permanent] > > ide_core 113868 5 ide_generic,ide_cd,ide_disk,piix,generic > > usbcore 113664 4 usbhid,ehci_hcd,uhci_hcd > > b44 23244 0 > > ohci1394 30416 0 > > ieee1394 87256 3 sbp2,eth1394,ohci1394 > > mii 5280 1 b44 > > thermal 13320 0 > > processor 25640 1 thermal > > fan 4676 0 > > > > > > --- Xorg.conf --- > > > > > > /etc/X11/xorg.conf (xorg X Window System server configuration file) > > # > > # This file was generated by dexconf, the Debian X Configuration tool, > > using # values from the debconf database. > > # > > # Edit this file with caution, and see the /etc/X11/xorg.conf manual > > page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) > > # > > # This file is automatically updated on xserver-xorg package upgrades > > *only* # if it has not been modified since the last upgrade of the > > xserver-xorg # package. > > # > > # If you have edited this file but would like it to be automatically > > updated # again, run the following command: > > # sudo dpkg-reconfigure -phigh xserver-xorg > > > > Section "Files" > > FontPath "/usr/share/fonts/X11/misc" > > FontPath "/usr/X11R6/lib/X11/fonts/misc" > > FontPath "/usr/share/fonts/X11/cyrillic" > > FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" > > FontPath "/usr/share/fonts/X11/100dpi/:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" > > FontPath "/usr/share/fonts/X11/75dpi/:unscaled" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" > > FontPath "/usr/share/fonts/X11/Type1" > > FontPath "/usr/X11R6/lib/X11/fonts/Type1" > > FontPath "/usr/share/fonts/X11/100dpi" > > FontPath "/usr/X11R6/lib/X11/fonts/100dpi" > > FontPath "/usr/share/fonts/X11/75dpi" > > FontPath "/usr/X11R6/lib/X11/fonts/75dpi" > > # path to defoma fonts > > FontPath > > "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection > > > > ection "Module" > > Load "bitmap" > > Load "ddc" > > Load "dri" > > Load "extmod" > > Load "freetype" > > Load "glx" > > Load "int10" > > Load "type1" > > Load "vbe" > > ## YEAHHHH > > Load "dbe" > > Load "record" > > Load "xtrap" > > Load "type1" > > Load "speedo" > > ## /yeahhhh > > EndSection > > > > Section "InputDevice" > > Identifier "Generic Keyboard" > > Driver "kbd" > > Option "CoreKeyboard" > > Option "XkbRules" "xorg" > > Option "XkbModel" "pc105" > > Option "XkbLayout" "es" > > EndSection > > > > Section "InputDevice" > > Identifier "Configured Mouse" > > Driver "mouse" > > Option "CorePointer" > > Option "Device" "/dev/input/mice" > > Option "Protocol" "ExplorerPS/2" > > Option "Emulate3Buttons" "true" > > EndSection > > > > Section "Device" > > Identifier "Intel Corporation 82852/855GM Integrated > > Graphics Device" > > Driver "i810" > > #yeah > > Option "NoAccel" "false" > > Option "DRI" "false" > > y si lo pones a true? > > > BusID "PCI:0:2:0" > > VideoRam 64000 > > ChipSet "915GM" > > Card "i810 915GM" > > EndSection > > > > Section "Monitor" > > Identifier "Monitor genérico" > > Option "DPMS" > > HorizSync 28-51 > > VertRefresh 43-60 > > EndSection > > > > Section "Screen" > > Identifier "Default Screen" > > Device "Intel Corporation 82852/855GM Integrated > > Graphics Device" > > Monitor "Monitor genérico" > > DefaultDepth 24 > > SubSection "Display" > > Depth 1 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > SubSection "Display" > > Depth 4 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > SubSection "Display" > > Depth 8 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > SubSection "Display" > > Depth 15 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > SubSection "Display" > > Depth 16 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > SubSection "Display" > > Depth 24 > > Modes "1024x768" "800x600" "640x480" > > EndSubSection > > EndSection > > Section "ServerLayout" > > Identifier "Default Layout" > > Screen "Default Screen" > > InputDevice "Generic Keyboard" > > InputDevice "Configured Mouse" > > EndSection > > > > Section "DRI" > > Group 0 > > Mode 0666 > > EndSection > > > > Section "Extensions" > > Option "Composite" "Enable" > > Option "RENDER" "Enable" > > Endsection > > > > Section "ServerLayout" > > Identifier "Default Layout" > > Screen "Default Screen" > > InputDevice "Generic Keyboard" > > InputDevice "Configured Mouse" > > EndSection > > > > > > > > > > helpppppp :P > > de todas maneras, xorg 7.0 se lleva fatal con el DRI y la aceleración. Sería mucho más útil si nos incluyeras la salida del glxinfo.
Yo he tenido que pasarme a las Mesa 6.5.1 + kernel 2.6.17-rcX para poder utilizar la aceleración gráfica con Xorg, pero es por mi tarjeta gráfica, una r300.