On Wed, 02 Aug 2006 20:51:43 -0300 Angel Claudio Alvarez <[EMAIL PROTECTED]> wrote:
> El mié, 02-08-2006 a las 19:52 -0300, rancho escribió: > > Antes que nada hola a todos. > > después me abruma otro problema. > > > > he estado "jugando" con un pequeño servidor web de pruevas. > > Mientras toqueteaba el sysvconfig active algunos scripts para > > que se activen, (pero ya no recuerdo cuales, eran tantos). > > > > > > lo mas grave ya lo solucione, por que cuando prendía la maquina, > > después de activar el cron se me moría el disco, pero el problema era al > > halt. > > > > Les cuento lo que me aqueja haber si alguien me puede ayudar. > > > > Hasta acá. anécdotas. > > > > el caso es que: > > > > características técnicas: > > PII 128 ram > > eth1, eth0 -> ppp0, > > adsl 1Mega, IP dinámica (zoneedit) actualizada con ddclient > > brinda servicios de servidor web(dos dominios-vhost), ftp, gateway de 1 > > hostmas > > > > error(es): > > - ping del cliente al dominio o ip brindada por el isp > > > > [EMAIL PROTECTED]:~$ ping www.midominio.com.ar > > PING www.midominio.com.ar (190.48.232.139): 56 data bytes > > ping: sendto: Invalid argument > > ping: wrote www.midominio.com.ar 64 chars, ret=-1 > > ping: sendto: Invalid argument > > ping: wrote www.midominio.com.ar 64 chars, ret=-1 > > ping: sendto: Invalid argument > > ping: wrote www.midominio.com.ar 64 chars, ret=-1 > > > > --- www.midominio.com.ar ping statistics --- > > 3 packets transmitted, 0 packets received, 100% packet loss > > > > y por supuesto con los navegadores web a los dominios > > recibo un gigantesco 404 > > ping desde el cliente a la ip local del servidor sin problemas. > > > > Saludos Cordiales. > > Andrés. > > Revisa la configuracion de la red *.-salida de route: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 200.51.241.227 * 255.255.255.255 UH 0 0 0 ppp0 localnet * 255.255.255.0 U 0 0 0 eth1 default 200.51.241.227 0.0.0.0 UG 0 0 0 ppp0 *.-ifconfig: eth0 Link encap:Ethernet HWaddr 00:E0:7D:AF:00:5F inet6 addr: fe80::2e0:7dff:feaf:5f/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:481056 errors:0 dropped:0 overruns:0 frame:0 TX packets:466686 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:264880485 (252.6 MiB) TX bytes:279787997 (266.8 MiB) Interrupt:11 Base address:0x1000 eth1 Link encap:Ethernet HWaddr 00:01:02:71:FD:E4 inet addr:192.168.1.10 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::201:2ff:fe71:fde4/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:388286 errors:0 dropped:0 overruns:0 frame:0 TX packets:407676 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:272525041 (259.9 MiB) TX bytes:270036335 (257.5 MiB) Interrupt:9 Base address:0x1400 ppp0 Link encap:Point-to-Point Protocol inet addr:190.48.232.139 P-t-P:200.51.241.227 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 RX packets:400425 errors:0 dropped:0 overruns:0 frame:0 TX packets:385367 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:249259023 (237.7 MiB) TX bytes:265733853 (253.4 MiB) *.-el interfaces auto lo eth0 eth1 iface lo inet loopback iface eth0 inet dhcp hostname ranchox iface eth1 inet static address 192.168.1.10 netmask 255.255.255.0 broadcast 192.168.1.255 ### END OF DEBCONF AREA. PLACE YOUR EDITS BELOW; THEY WILL BE PRESERVED. auto dsl-provider iface dsl-provider inet ppp provider dsl-provider # please do not modify the following line pre-up /sbin/ifconfig eth0 up # line maintained by pppoeconf *.-salida del /etc/init.d/networck interfaces # /etc/init.d/networking restart Setting up IP spoofing protection: rp_filter. Reconfiguring network interfaces...ifup: interface lo already configured Internet Software Consortium DHCP Client 2.0pl5 Copyright 1995, 1996, 1997, 1998, 1999 The Internet Software Consortium. All rights reserved. Please contribute if you find this software useful. For info, please visit http://www.isc.org/dhcp-contrib.html sit0: unknown hardware address type 776 sit0: unknown hardware address type 776 Listening on LPF/eth0/00:e0:7d:af:00:5f Sending on LPF/eth0/00:e0:7d:af:00:5f Sending on Socket/fallback/fallback-net DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 No DHCPOFFERS received. No working leases in persistent database. Exiting. Failed to bring up eth0. Plugin rp-pppoe.so loaded. done. .-.-.- me extraña estas ultimas lineas *.-## iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere DROP tcp -- anywhere anywhere tcp dpt:smtp Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination creo que esta todo bien configurado y supongo que no me olvido de poner nada más. Saludos Cordiales. Andrés -- ______________________________________________ LLama Gratis a cualquier PC del Mundo. Llamadas a fijos y móviles desde 1 céntimo por minuto. http://es.voice.yahoo.com