Hola listreros tengo la siguiente situacion: tengo un servidor con cuatro placas de red: eth0 para la red local eth1 conectada a un router adsl 2.5M eth2 conectada a otro router adsl de 2M eth3 conectada a una linea dedicada de 512K
lo que estoy intentando de hacer es balaceo de carga entre los dos adsl. entonces cree el siguiente scripts ########################################### ### SETEO DE VARIABLES ########################################### IF_LAN=eth0 # placa red local IF_ADSL1=eth1 # placa adsl1 IF_ADSL2=eth2 # placa adsl2 IF_INTEGRA=eth3 # placa integra (uso exclusivo para web) IP_LAN=10.1.1.1 # ip de la red local IP_ADSL1=10.0.1.3 # ip de router adsl1 IP_ADSL2=10.0.2.3 # ip de router adsl2 IP_INTEGRA=200.43.126.130 # la direccion ip de eth3 (router) GW_ADSL1=10.0.1.1 # ip del router de adsl1 (gateway) GW_ADSL2=10.0.2.1 # ip del router de adsl2 (gateway) GW_INTEGRA=200.43.126.129 # ip del router de integra (gateway) MASK_LAN=16 MASK_ADSL1=24 MASK_ADSL2=24 MASK_INTEGRA=25 NET_LAN=10.1.0.0/$MASK_LAN # netmask de red local NET_ADSL1=10.0.1.0/$MASK_ADSL1 # netmask de adsl1 NET_ADSL2=10.0.2.0/$MASK_ADSL2 # netmask de adsl2 NET_INTEGRA=200.43.126.128/$MASK_INTEGRA # netmask de integra BRD_ADSL1=10.0.1.255 BRD_ADSL2=10.0.2.255 BRD_INTEGRA=200.43.126.255 ############################################### ### AJUSTES DE PARAMETROS DE RUTEO ############################################### echo 30 > /proc/sys/net/ipv4/route/gc_interval echo 100 > /proc/sys/net/ipv4/route/gc_elasticity echo 100 > /proc/sys/net/ipv4/route/gc_timeout echo 5 > /proc/sys/net/ipv4/route/max_delay echo 4096 > /proc/sys/net/ipv4/route/max_size echo 2048 > /proc/sys/net/ipv4/route/gc_thresh ############################################### #CREA LAS TABLAS EN RT_TABLES ############################################### echo "# reserved values" > /etc/iproute2/rt_tables echo "255 local" >> /etc/iproute2/rt_tables echo "254 main" >> /etc/iproute2/rt_tables echo "253 default" >> /etc/iproute2/rt_tables echo "0 unspec" >> /etc/iproute2/rt_tables echo "#" >> /etc/iproute2/rt_tables echo "# local" >> /etc/iproute2/rt_tables echo "#" >> /etc/iproute2/rt_tables echo "#1 inr.ruhep" >> /etc/iproute2/rt_tables echo "201 T_ADSL1" >> /etc/iproute2/rt_tables echo "202 T_ADSL2" >> /etc/iproute2/rt_tables echo "203 T_INTEGRA" >> /etc/iproute2/rt_tables echo "222 T_BALANCEO" >> /etc/iproute2/rt_tables ####################################################### ################################################# # CONFIGURA LAS PLACAS DE RED ################################################# ip link set $IF_LAN up ip addr add $IP_LAN/$MASK_LAN brd + dev $IF_LAN ip link set $IF_ADSL1 up ip addr flush dev $IF_ADSL1 ip addr add $IP_ADSL1/$MASK_ADSL1 brd $BRD_ADSL1 dev $IF_ADSL1 ip link set $IF_ADSL2 up ip addr flush dev $IF_ADSL2 ip addr add $IP_ADSL2/$MASK_ADSL2 brd $BRD_ADSL2 dev $IF_ADSL2 ip link set $IF_INTEGRA up ip addr flush dev $IF_INTEGRA ip addr add $IP_INTEGRA/$MASK_INTEGRA brd $BRD_INTEGRA dev $IF_INTEGRA ############################################### # BORRA LA RUTA POR DEFAULT DE MAIN ############################################### ip route del default table main ################################# # BORRA TODAS LAS REGLAS ################################ ip rule del from 10.0.1.0/24 lookup T_ADSL1 ## regla particular de red ip rule del from 10.0.2.0/24 lookup T_ADSL2 ## regla particular de red2 ip rule del prio 222 ## regla virtual de balanceo ip rule del prio 50 ## regla main ip rule del from 200.43.126.130 lookup T_INTEGRA ip rule del from 200.43.126.130 lookup T_INTEGRA ip rule del from 200.43.126.130 lookup T_INTEGRA ########################################### ### BORRAR TABLAS DE RUTEO ########################################### ip route flush cache ip route flush default ip route flush 201 # tabla ADSL1 ip route flush 202 # tabla ADSL2 ip route flush 203 # tabla INTEGRA ip route flush 222 # tabla balanceo ########################################### ### CREACION DE RUTAS DE LA RED LOCAL ########################################### route add 127.0.0.1 lo route add $IP_LAN $IF_LAN ########################################### ### CREAR RUTAS EN LA TABLA MAIN ########################################### ip route add $NET_LAN dev $IF_LAN src $IP_LAN ip route add $NET_ADSL1 dev $IF_ADSL1 src $IP_ADSL1 ip route add $NET_ADSL2 dev $IF_ADSL2 src $IP_ADSL2 ip route add $NET_INTEGRA dev $IF_INTEGRA src $IP_INTEGRA ########################################### ### CREAR TABLAS DE LAS SALIDAS A INTERNET ########################################### ip route add $NET_ADSL1 dev $IF_ADSL1 src $IP_ADSL1 table T_ADSL1 ip route add default via $GW_ADSL1 dev $IF_ADSL1 src $IP_ADSL1 proto static table T_ADSL1 ip route append prohibit default table T_ADSL1 metric 1 proto static ip route add $NET_ADSL2 dev $IF_ADSL2 src $IP_ADSL2 table T_ADSL2 ip route add default via $GW_ADSL2 dev $IF_ADSL2 src $IP_ADSL2 proto static table T_ADSL2 ip route append prohibit default table T_ADSL2 metric 1 proto static ip route add $NET_INTEGRA dev $IF_INTEGRA src $IP_INTEGRA table T_INTEGRA ip route add default via $GW_INTEGRA table T_INTEGRA ######################################################## ### ENCAMINAMOS LOS PAQUETES - CREACION DE LAS REGLAS ######################################################## ip rule add prio 50 table main ip rule add prio 201 from $NET_ADSL1 table T_ADSL1 ip rule add prio 202 from $NET_ADSL2 table T_ADSL2 ip rule add prio 222 table T_BALANCEO ip rule add from $IP_INTEGRA table T_INTEGRA ########################################### ### CREAR BALANCEO DE CARGA ENTRE ADSL1 Y 2 ########################################### ip route add default table T_BALANCEO proto static \ nexthop via $GW_ADSL1 dev $IF_ADSL1 \ nexthop via $GW_ADSL2 dev $IF_ADSL2 ############################################## el balanceo no funciona del todo bien cada tanto (unos minutos) pareceria como si se cayera la conexion y despues de un minuto todo vuelve a funcionar. estuve buscando en gooogle pero no encontre nada al respecto. otro de los problemas que tengo con el balanceo es que cuando uno de los enlaces adsl se desconecta automaticamente el servidor deja de reenviar los paquetes a internet, como si los dos enlaces estarian caidos, es decir que el balanceo no tiene tolerancia a fallos. alguien me podria decir a que se puede deber este problema. ya hace bastante que ando con este problema y la verdad que lei todos los tutoriales que encontre y no logro encontrar la solucion. help!!!!!!!!!!!!!!!!!!!!! --- Saludos, Cristian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]