Hola Estoy intentando configurar el DRI en Etch (kernel 2.6.18-4, xorg 7.1.0-16) con una tarjeta:
00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) 00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller (rev 04) usando el driver i810. La configuración está bien. No es una presunción: está bien. Incluso (cansado de probar cosas) he arrancado con una Knoppix 5.1, comprobado que glxinfo devuelve un direct rendering: Yes, y usado el xorg.conf que ha generado en mi Etch. El resultado es siempre: [EMAIL PROTECTED]:~$ glxinfo | grep direct ERROR: line 114, Function intelInitDriver, File intel_screen.c libGL error: InitDriver failed libGL error: reverting to (slow) indirect rendering direct rendering: No Pensando en que pueda ser cosa del driver he sustituido los originales en /usr/lib/dri (ambos, i810 e i915) por las últimas snapsots que hay en http://dri.freedesktop.org/snapshots/. El resultado es exactamente el mismo. Repito que arrancando con Knoppix funciona perfectamente. Hay alguien que sepa o pueda imaginar cuál es la causa?. Muchas gracias por adelantado. Las partes relacionadas en el /var/log: (II) I810: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 965G, 965G, 965Q, 946GZ (II) Primary Device is: PCI 00:02:0 (--) Assigning device section with no busID to primary device (WW) I810: No matching Device section for instance (BusID PCI:0:2:1) found (--) Chipset 915GM found [...] (WW) I810(0): Bad V_BIOS checksum (II) I810(0): Primary V_BIOS segment is: 0xc000 (II) I810(0): VESA BIOS detected (II) I810(0): VESA VBE Version 3.0 (II) I810(0): VESA VBE Total Mem: 7872 kB (II) I810(0): VESA VBE OEM: Intel(r)915GM/910ML/915MS Graphics Chip Accelerated VGA BIOS (II) I810(0): VESA VBE OEM Software Rev: 1.0 (II) I810(0): VESA VBE OEM Vendor: Intel Corporation (II) I810(0): VESA VBE OEM Product: Intel(r)915GM/910ML/915MS Graphics Controlle r (II) I810(0): VESA VBE OEM Product Rev: Hardware Version 0.0 (II) I810(0): Integrated Graphics Chipset: Intel(R) 915GM (--) I810(0): Chipset: "915GM" (--) I810(0): Linear framebuffer at 0xC0000000 (--) I810(0): IO registers at addr 0xB0080000 [...] (--) I810(0): Pre-allocated VideoRAM: 7932 kByte (==) I810(0): VideoRAM: 65536 kByte (==) I810(0): video overlay key set to 0x101fe (**) I810(0): page flipping disabled (==) I810(0): Using gamma correction (1.0, 1.0, 1.0) (II) I810(0): BIOS Build: 1222 (==) I810(0): Device Presence: disabled. (==) I810(0): Display Info: enabled. (II) I810(0): Broken BIOSes cause the system to hang here. If you encounter this problem please add Option "DisplayInfo" "FALSE" to the Device section of your XF86Config file. [...] drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: Searching for BusID pci:0000:00:02.0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is 9, (OK) drmOpenByBusid: drmOpenMinor returns 9 drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 (WW) AIGLX: 3D driver claims to not support visual 0x23 (WW) AIGLX: 3D driver claims to not support visual 0x24 (WW) AIGLX: 3D driver claims to not support visual 0x25 (WW) AIGLX: 3D driver claims to not support visual 0x26 (WW) AIGLX: 3D driver claims to not support visual 0x27 (WW) AIGLX: 3D driver claims to not support visual 0x28 (WW) AIGLX: 3D driver claims to not support visual 0x29 (WW) AIGLX: 3D driver claims to not support visual 0x2a (WW) AIGLX: 3D driver claims to not support visual 0x2b (WW) AIGLX: 3D driver claims to not support visual 0x2c (WW) AIGLX: 3D driver claims to not support visual 0x2d (WW) AIGLX: 3D driver claims to not support visual 0x2e (WW) AIGLX: 3D driver claims to not support visual 0x2f (WW) AIGLX: 3D driver claims to not support visual 0x30 (WW) AIGLX: 3D driver claims to not support visual 0x31 (WW) AIGLX: 3D driver claims to not support visual 0x32 (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so (II) GLX: Initialized DRI GL provider for screen 0 -- ~aKira~ dd if=/dev/zero of=/mnt/win_c Geek by nature, Linux by choice... Debian, of course Linux Registered User #373380 http://debianizado.net/
pgp9ihTS52qN4.pgp
Description: PGP signature