El Thu, 01 Apr 2010 11:17:39 -0400, Leonel Hernández Grandela escribió: > aca muestro lo del wvdial .. > debian:~# wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud > ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud > ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up. ttyS1<*1>: > ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud ttyS1<*1>: ATQ0 > V1 E1 -- failed with 9600 baud, next try: 115200 baud ttyS1<*1>: ATQ0 V1 > E1 -- and failed too at 115200, giving up. Modem Port Scan<*1>: S2 S3 > > > Sorry, no modem was detected! Is it in use by another program? Did you > configure it properly with setserial? > > Please read the FAQ at http://open.nit.ca/wiki/?WvDial > > If you still have problems, send mail to <wvdial-l...@lists.nit.ca>. > debian:~#
Ostras... pues mal asunto. A ver, espera, no vaya a ser que que aún tengas el módem bloqueado por el mgetty. ¿Eliminaste el archivo ".lock" antes de ejecutar el asistente de configuración del wvdial? > o sea no encontro el modem ... > ahora lo coloco el modem en el pc que si trabaja usando el mismo cable > el mismo modem .. alla el wvdial lo detecta de maravillas Espera, espera... ¿Qué has hecho exactamente, cambiar el módem que tenías en el equipo donde no te funciona el mgetty y lo has conectado al equipo donde si te estaba trabajando? Si es así, entonces el módem está bien, puedes descartarlo. Ahora te queda por eliminar el puerto serie y el cable como posible origen del problema. > server:~# wvdialconf /etc/wvdial.conf Editing `/etc/wvdial.conf'. > > Scanning your serial ports for a modem. > > ttyS0<*1>: ATQ0 V1 E1 -- OK > ttyS0<*1>: ATQ0 V1 E1 Z -- OK > ttyS0<*1>: ATQ0 V1 E1 S0=0 -- OK > ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK > ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK ttyS0<*1>: ATQ0 V1 E1 S0=0 &C1 > &D2 +FCLASS=0 -- OK ttyS0<*1>: Modem Identifier: ATI -- 33604 ttyS0<*1>: > Speed 4800: AT -- OK > ttyS0<*1>: Speed 9600: AT -- OK > ttyS0<*1>: Speed 19200: AT -- OK > ttyS0<*1>: Speed 38400: AT -- OK > ttyS0<*1>: Speed 57600: AT -- OK > ttyS0<*1>: Speed 115200: AT -- OK > ttyS0<*1>: Max speed is 115200; that should be safe. ttyS0<*1>: ATQ0 V1 > E1 S0=0 &C1 &D2 +FCLASS=0 -- OK Modem Port Scan<*1>: S2 S3 > > Found a modem on /dev/ttyS0. > Modem configuration written to /etc/wvdial.conf. ttyS0<Info>: Speed > 115200; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0" server:~# > > que pasara :( ... muchas gracias Saludos, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2010.04.01.15.26...@gmail.com