Hola a todos,
compile el kernel 2.6.36-1 para Debian Lenny en un portátil Dell (no
recuerdo ahora el modelo), no me funciona el sniffer, me aparece este
error:
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
insmod rt3593sta.ko
insmod: error inserting 'rt3593sta.ko': -1 Invalid module format
[ 313.466309] rt3593sta: no symbol version for module_layout
[ 338.731164] rt3593sta: no symbol version for module_layout
[ 379.988236] b44 ssb0:0: eth0: Link is up at 100 Mbps, full duplex
[ 379.988241] b44 ssb0:0: eth0: Flow control is off for TX and off for RX
[ 379.988513] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 390.760086] eth0: no IPv6 routers present
[ 437.463198] rt3593sta: no symbol version for module_layout
Con el kernel que viene por defecto con la Debian Lenny si me
funciona, estos son los pasos que realizo:
debian:/home/sergio# ifconfig eth0 192.168.250.5
debian:/home/sergio# cd Desktop
debian:/home/sergio/Desktop# cd Sigma_Sniffer-11n-Linux_v4_2_0
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0# cd
Ralink-Debian-Driver/
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver#
cd RT3800STA/
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
cp -r RT2860STA /etc/Wireless
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
insmod rt3593sta.ko
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
ifconfig ra0 up
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
ra0 Ralink STA ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.437 GHz Bit Rate=1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise level:-93 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
iwconfig ra0 mode monitor
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
/etc/rc.local start
Starting Sigma Sniffer Service
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA#
ps
PID TTY TIME CMD
3667 pts/1 00:00:00 bash
3743 pts/1 00:00:00 ps
debian:/home/sergio/Desktop/Sigma_Sniffer-11n-Linux_v4_2_0/Ralink-Debian-Driver/RT3800STA
Alguna sugerencia?
Gracias, un saludo.
--
To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/ca+ylrtcarb7fkl1ijrpmcjkpjxtnsbs998ckscp1hmfqknq...@mail.gmail.com
