2012/12/5 ciracusa <cirac...@gmail.com>: > Camaleón wrote: >> >> El Tue, 04 Dec 2012 11:23:13 -0200, ciracusa escribió: >> >> (...) >> >> >>> >>> Será que falta montar un "bride" entre el VETH del contenedor y la IP >>> del host anfitrión? >>> >> >> >> Pues mira que no he usado nunca el OpenVZ ese pero de tanto leerlo por >> aquí ya me está picando la curiosidad :-) >> >> A ver, el VirtualBox tendrías que definir la interfaz en modo puente, >> efectivamente, y en OpenVZ... pues vamos a leer: >> >> http://wiki.openvz.org/Virtual_Ethernet_device >> >> "(...) When veth is bridged to a CT0 network interface (e.g., eth0), the >> container can act as an independent host on the network. The container's >> user can set up all of the networking himself, including IPs, gateways, >> etc." >> >> Pues parece que sí. >> >> Saludos, >> >> > > > Camaleon, estoy siguiendo el tuto que me decías hasta que llego a este > punto: > > "Independent Virtual Ethernet communication through the bridge > > Bridging a CT interface to a CT0 interface is the magic that allows the CT > to be an independent host on the network with its own IP address, gateway, > etc. CT0 does not need any configuration for forwarding packets to the CT or > performing proxy arp for the CT or event the routing. > > To manually configure a bridge and add devices to it, perform steps 1 - 4 > from Simple configuration chapter for several containers and/or veth devices > using FE:FF:FF:FF:FF:FF as a CT0 veth side MAC address and then follow these > steps." > > Ahora bien luego indica: > > [host-node]# brctl addbr vzbr0 > > Y luego: > > [host-node]# brctl addif vzbr0 veth101.0 > > Aquí es donde no comprendo "veth101.0" > > Esto es una interface creada en el CT0 (host-node) o en el CT101? > > Bueno, espero haber sido claro :/ > > MUchas Gracias. > > Saludos. > > > > -- > To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact > listmas...@lists.debian.org > Archive: http://lists.debian.org/50bf3b7a.5070...@gmail.com >
Ciracusa no creas quese desvirtua el hilo es untema importante que le puede pasar a cualquiera en openvz podes crear una archivo de ejecucion en el inicio asi /etc/vz/conf/$id.mount y relacionado con un script /etc/vz/conf/$id.sh -- MrIX Linux user number 412793. http://counter.li.org/ las grandes obras, las sueñan los santos locos, las realizan los luchadores natos, las aprovechan los felices cuerdo, y las critican los inútiles crónicos, -- To UNSUBSCRIBE, email to debian-user-spanish-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/calvb54avplygy1bxnxy2mqrx-q8vaqrv7ws97isvzlleh1c...@mail.gmail.com