Csf firewall
I have installed the CSF Firewall with the webmin. Once I fully installed it, I
applied the changees and restarted the computer and when I opened the webmin,
The following appeared )and this is strange for I am the only one that uses
this computer):
According to the end of your /var/log/messages:
Dec 28 18:16:43 eagle304 kernel: [95809.583160] Firewall: *TCP_IN
Blocked* IN=eth0 OUT= MAC=00:19:99:c3:ef:cf:64:87:88:b3:ae:01:08:00
SRC=69.64.45.188 DST=69.64.39.218 LEN=44 TOS=0x00 PREC=0x00 TTL=55
ID=52976 PROTO=TCP SPT=35398 DPT=2000 WINDOW=32120 RES=0x00 SYN URGP=0
Dec 28 18:16:45 eagle304 kernel: [95811.581887] Firewall: *TCP_IN
Blocked* IN=eth0 OUT= MAC=00:19:99:c3:ef:cf:64:87:88:b3:ae:01:08:00
SRC=69.64.45.188 DST=69.64.39.218 LEN=44 TOS=0x00 PREC=0x00 TTL=55
ID=52976 PROTO=TCP SPT=35398 DPT=2000 WINDOW=32120 RES=0x00 SYN URGP=0
Dec 28 18:20:38 eagle304 kernel: [96045.348102] Firewall: *UDP_IN
Blocked* IN=eth0 OUT= MAC=00:19:99:c3:ef:cf:64:87:88:b3:c1:81:08:00
SRC=176.92.88.94 DST=69.64.39.218 LEN=90 TOS=0x00 PREC=0x00 TTL=110
ID=10164 PROTO=UDP SPT=10423 DPT=50362 LEN=70
Dec 28 18:20:58 eagle304 kernel: [96064.844348] Firewall: *UDP_IN
Blocked* IN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:19:99:a9:33:a4:08:00
SRC=69.64.38.103 DST=255.255.255.255 LEN=95 TOS=0x00 PREC=0x00 TTL=64
ID=0 DF PROTO=UDP SPT=47241 DPT=10412 LEN=75
the server may have been under attack.
After rebooting, the server is at its login prompt again, yet we find
no TCP port responding to cursory port scans.
You can make necessary configuration adjustments by placing the server
into Recovery Mode by navigating to Hardware > Recovery, on your
Power Panel Page, mounting the necessary file systems, and altering the
configuration as needed.
This was the answer given by the server. So I think I need to config sometyhin.
Thanks a lot. I wait for an answer.
