Buenas, el problema entonces... Podría ser el que te comentaba antes de los dispositivos? o....
Fran. 2020-01-08 23:33 GMT+01:00, Julián Daich <julia...@gmail.com>: > > > El 8/1/20 a las 23:16, Fran Torres escribió: >> Buenas, > >> Otra cosa que se me ocurre... dices que en local funciona. Los >> clientes, están dentro de la misma red LAN entiendo; no? >> > > Hola, > > Sí están todos dentro de una VPN de la que el director es también el > servidor. Los clientes se conectan con el director, eso ya lo verifiqué, > pero se quedan colgados esperando conectarse con las unidades del > almacenamiento. Son dos procesos distintos a uno lo gestiona bacula-sd y > al otro bacula-fd. > > Saludos, > > Julián > >> Fran. >> >> 2020-01-08 22:50 GMT+01:00, Julián Daich <julia...@gmail.com>: >>> >>> >>> El 8/1/20 a las 20:52, Fran Torres escribió: >>>> Buenas, >>>> >>>> a riesgo de meter la pata, pregunto: >>>> en /dev/, tienes los dispositivos que especificas en el fichero conf >>>> del director? >>> >>> Hola Fran, >>> >>> En principio sí >>>> ejemplo: /dev/lto4. >>> >>> Esa unidad está comentada. Viene por defecto en la configuración, pero >>> no la uso. >>> >>>> lo que tienes en /mnt, está montado? >>> >>> Sí, Está montado en el director y funciona para los respaldos locales. >>> >>>> También veo que faltan algunas cosas por configurar, >>> >>> ¿ Por ejemplo que? >>> >>>> tiene pinta de >>>> que muchas cosas tienen la configuración; bien de ejemplo, o bien por >>>> defecto. >>>> >>> >>> Configuré solo lo que uso y entiendo. El resto dejé lo que aparece por >>> defecto¿ recomiendas preparar a partir de un archivo en limpio? >>> >>> Saludos, >>> >>> Juliań >>> >>>> Fran. >>>> >>>> 2020-01-08 20:10 GMT+01:00, Julian Daich <julia...@gmail.com>: >>>>> Hola >>>>> >>>>> Tengo porblemas para hacer que Bacula respalde cleintes remotos. Los >>>>> clientes remotos se conectan al director, pero se quedan colgando >>>>> esperando el almacenamiento. Con el cleinte local no ocurre, solo con >>>>> los remotos. Creo que el problema está en bacula-sd.conf. Pego abajo >>>>> los archivos de configuración. >>>>> >>>>> Saludos, >>>>> >>>>> Julián >>>>> >>>>> En servdidor local >>>>> >>>>> bacula-dir.conf >>>>> >>>>> # >>>>> # Default Bacula Director Configuration file >>>>> # >>>>> # The only thing that MUST be changed is to add one or more >>>>> # file or directory names in the Include directive of the >>>>> # FileSet resource. >>>>> # >>>>> # For Bacula release 9.4.2 (04 February 2019) -- debian buster/sid >>>>> # >>>>> # You might also want to change the default email address >>>>> # from root to your address. See the "mail" and "operator" >>>>> # directives in the Messages resource. >>>>> # >>>>> # Copyright (C) 2000-2017 Kern Sibbald >>>>> # License: BSD 2-Clause; see file LICENSE-FOSS >>>>> # >>>>> >>>>> Director { # define myself >>>>> Name = local-1-dir >>>>> # Name = local-1.us-central1-a.c.lindswp.internal-dir >>>>> DIRport = 9101 # where we listen for UA connections >>>>> QueryFile = "/etc/bacula/scripts/query.sql" >>>>> WorkingDirectory = "/var/lib/bacula" >>>>> PidDirectory = "/run/bacula" >>>>> Maximum Concurrent Jobs = 20 >>>>> Password = "AAOV_D" # Console password >>>>> Messages = Daemon >>>>> DirAddress = 10.8.0.1 >>>>> } >>>>> >>>>> JobDefs { >>>>> Name = "DefaultJob" >>>>> Type = Backup >>>>> Level = Incremental >>>>> Client = local-1-fd >>>>> # Client = local-1.us-central1-a.c.lindswp.internal-fd >>>>> FileSet = "Full Set" >>>>> Schedule = "WeeklyCycle" >>>>> Storage = File1 >>>>> Messages = Standard >>>>> Pool = File >>>>> SpoolAttributes = yes >>>>> Priority = 10 >>>>> Write Bootstrap = "/var/lib/bacula/%c.bsr" >>>>> } >>>>> >>>>> >>>>> # >>>>> # Define the main nightly save backup job >>>>> # By default, this job will back up to disk in >>>>> /nonexistant/path/to/file/archive/dir >>>>> Job { >>>>> Name = "BackupLocalFiles" >>>>> Client = local-1-fd >>>>> # Client = local-1.us-central1-a.c.lindswp.internal2-fd >>>>> JobDefs = "DefaultJob" >>>>> } >>>>> >>>>> Job { >>>>> Name = "BackupKalipso" >>>>> Client = kalipso-fd >>>>> JobDefs = "DefaultJob" >>>>> } >>>>> >>>>> Job { >>>>> Name = "BackupCertBack-1" >>>>> Client = certback-1-fd >>>>> JobDefs = "DefaultJob" >>>>> } >>>>> >>>>> >>>>> #Job { >>>>> # Name = "BackupClient1-to-Tape" >>>>> # JobDefs = "DefaultJob" >>>>> # Storage = LTO-4 >>>>> # Spool Data = yes # Avoid shoe-shine >>>>> # Pool = Default >>>>> #} >>>>> >>>>> #} >>>>> >>>>> # Backup the catalog database (after the nightly save) >>>>> Job { >>>>> Name = "BackupCatalog" >>>>> JobDefs = "DefaultJob" >>>>> Level = Full >>>>> FileSet="Catalog" >>>>> Schedule = "WeeklyCycleAfterBackup" >>>>> # This creates an ASCII copy of the catalog >>>>> # Arguments to make_catalog_backup.pl are: >>>>> # make_catalog_backup.pl <catalog-name> >>>>> RunBeforeJob = "/etc/bacula/scripts/make_catalog_backup.pl >>>>> MyCatalog" >>>>> # This deletes the copy of the catalog >>>>> RunAfterJob = "/etc/bacula/scripts/delete_catalog_backup" >>>>> Write Bootstrap = "/var/lib/bacula/%n.bsr" >>>>> Priority = 11 # run after main backup >>>>> } >>>>> >>>>> # >>>>> # Standard Restore template, to be changed by Console program >>>>> # Only one such job is needed for all Jobs/Clients/Storage ... >>>>> # >>>>> Job { >>>>> Name = "RestoreLocalFiles" >>>>> Type = Restore >>>>> Client=local-1-fd >>>>> # Client=local-1.us-central1-a.c.lindswp.internal-fd >>>>> Storage = File1 >>>>> # The FileSet and Pool directives are not used by Restore Jobs >>>>> # but must not be removed >>>>> FileSet="Full Set" >>>>> Pool = File >>>>> Messages = Standard >>>>> Where = /mnt/storage/bacula/restore >>>>> } >>>>> >>>>> Job { >>>>> Name = "RestoreKalipso" >>>>> Type = Restore >>>>> Client=kalipso-fd >>>>> Storage = File1 >>>>> FileSet="Full Set" >>>>> Pool = File >>>>> Messages = Standard >>>>> Where = /mnt/storage/bacula/restore >>>>> } >>>>> >>>>> Job { >>>>> Name = "RestoreCertBack-1" >>>>> Type = Restore >>>>> Client=certback-1-fd >>>>> Storage = File1 >>>>> FileSet="Full Set" >>>>> Pool = File >>>>> Messages = Standard >>>>> Where = /mnt/storage/bacula/restore >>>>> } >>>>> >>>>> # List of files to be backed up >>>>> FileSet { >>>>> Name = "Full Set" >>>>> Include { >>>>> Options { >>>>> signature = MD5 >>>>> compression = GZIP >>>>> } >>>>> # >>>>> # Put your list of files here, preceded by 'File =', one per line >>>>> # or include an external list with: >>>>> # >>>>> # File = <file-name >>>>> # >>>>> # Note: / backs up everything on the root partition. >>>>> # if you have other partitions such as /usr or /home >>>>> # you will probably want to add them too. >>>>> # >>>>> # By default this is defined to point to the Bacula binary >>>>> # directory to give a reasonable FileSet to backup to >>>>> # disk storage during initial testing. >>>>> # >>>>> File = /usr/sbin >>>>> File = /home >>>>> File = /etc >>>>> File = /var >>>>> File = /mnt/storage >>>>> } >>>>> >>>>> # >>>>> # If you backup the root directory, the following two excluded >>>>> # files can be useful >>>>> # >>>>> Exclude { >>>>> File = /var/lib/bacula >>>>> File = /nonexistant/path/to/file/archive/dir >>>>> File = /mnt/storage/bacula >>>>> File = /proc >>>>> File = /tmp >>>>> File = /sys >>>>> File = /.journal >>>>> File = /.fsck >>>>> } >>>>> } >>>>> >>>>> # >>>>> # When to do the backups, full backup on first sunday of the month, >>>>> # differential (i.e. incremental since full) every other sunday, >>>>> # and incremental backups other days >>>>> Schedule { >>>>> Name = "WeeklyCycle" >>>>> Run = Full 1st sun at 23:05 >>>>> # Run = Differential 2nd-5th sun at 23:05 >>>>> Run = Incremental mon-sat at 23:05 >>>>> } >>>>> >>>>> # This schedule does the catalog. It starts after the WeeklyCycle >>>>> Schedule { >>>>> Name = "WeeklyCycleAfterBackup" >>>>> Run = Full sun-sat at 23:10 >>>>> } >>>>> >>>>> # This is the backup of the catalog >>>>> FileSet { >>>>> Name = "Catalog" >>>>> Include { >>>>> Options { >>>>> signature = MD5 >>>>> } >>>>> File = "/var/lib/bacula/bacula.sql" >>>>> } >>>>> } >>>>> >>>>> # Client (File Services) to backup >>>>> Client { >>>>> Name = local-1-fd >>>>> # Name = local-1.us-central1-a.c.lindswp.internal-fd >>>>> Address = 10.8.0.1 >>>>> FDPort = 9102 >>>>> Catalog = MyCatalog >>>>> Password = "lYK8" # password for FileDaemon >>>>> File Retention = 60 days # 60 days >>>>> Job Retention = 6 months # six months >>>>> AutoPrune = yes # Prune expired Jobs/Files >>>>> } >>>>> >>>>> # >>>>> # Second Client (File Services) to backup >>>>> # You should change Name, Address, and Password before using >>>>> # >>>>> Client { >>>>> Name = kalipso-fd >>>>> Address = 10.8.0.2 >>>>> FDPort = 9102 >>>>> Catalog = MyCatalog >>>>> Password = "lYK82" # password for FileDaemon 2 >>>>> File Retention = 60 days # 60 days >>>>> Job Retention = 6 months # six months >>>>> AutoPrune = yes # Prune expired Jobs/Files >>>>> } >>>>> >>>>> Client { >>>>> Name = certback-1-fd >>>>> Address = 10.8.0.10 >>>>> FDPort = 9102 >>>>> Catalog = MyCatalog >>>>> Password = "lYK83" # password for FileDae$ >>>>> File Retention = 60 days # 60 days >>>>> Job Retention = 6 months # six months >>>>> AutoPrune = yes # Prune expired Jobs/Files >>>>> } >>>>> >>>>> # Definition of file Virtual Autochanger device >>>>> Autochanger { >>>>> Name = File1 >>>>> # Do not use "localhost" here >>>>> Address = 10.8.0.1 # N.B. Use a fully qualified name >>>>> here >>>>> SDPort = 9103 >>>>> Password = "Y32Xmm" >>>>> Device = FileChgr1 >>>>> Media Type = File1 >>>>> Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same >>>>> time >>>>> Autochanger = File1 # point to ourself >>>>> } >>>>> >>>>> # Definition of a second file Virtual Autochanger device >>>>> # Possibly pointing to a different disk drive >>>>> Autochanger { >>>>> Name = File2 >>>>> # Do not use "localhost" here >>>>> Address = 10.8.0.10 # N.B. Use a fully qualified name >>>>> here >>>>> SDPort = 9103 >>>>> Password = "Y32Xmm" >>>>> Device = FileChgr2 >>>>> Media Type = File2 >>>>> Autochanger = File2 # point to ourself >>>>> Maximum Concurrent Jobs = 10 # run up to 10 jobs a the same >>>>> time >>>>> } >>>>> >>>>> # Definition of LTO-4 tape Autochanger device >>>>> #Autochanger { >>>>> # Name = LTO-4 >>>>> # Do not use "localhost" here >>>>> # Address = localhost # N.B. Use a fully qualified name >>>>> here >>>>> # SDPort = 9103 >>>>> # Password = "Y32Xmm" # password for Storage daemon >>>>> # Device = LTO-4 # must be same as Device in >>>>> Storage >>>>> daemon >>>>> # Media Type = LTO-4 # must be same as MediaType in >>>>> Storage daemon >>>>> # Autochanger = LTO-4 # enable for autochanger device >>>>> # Maximum Concurrent Jobs = 10 >>>>> #} >>>>> >>>>> # Generic catalog service >>>>> Catalog { >>>>> Name = MyCatalog >>>>> dbname = "bacula"; DB Address = "localhost"; DB Port= "3306"; dbuser >>>>> = "bacula"; dbpassword = "t0rn1ll0" >>>>> } >>>>> >>>>> # Reasonable message delivery -- send most everything to email address >>>>> # and to the console >>>>> Messages { >>>>> Name = Standard >>>>> # >>>>> # NOTE! If you send to two email or more email addresses, you will >>>>> need >>>>> # to replace the %r in the from field (-f part) with a single valid >>>>> # email address in both the mailcommand and the operatorcommand. >>>>> # What this does is, it sets the email address that emails would >>>>> display >>>>> # in the FROM field, which is by default the same email as they're >>>>> being >>>>> # sent to. However, if you send email to more than one address, then >>>>> # you'll have to set the FROM address manually, to a single address. >>>>> # for example, a 'no-re...@mydomain.com', is better since that tends >>>>> to >>>>> # tell (most) people that its coming from an automated source. >>>>> >>>>> # >>>>> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" >>>>> -s \"Bacula: %t %e of %c %l\" %r" >>>>> operatorcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) >>>>> \<%r\>\" -s \"Bacula: Intervention needed for %j\" %r" >>>>> mail = root = all, !skipped >>>>> operator = root = mount >>>>> console = all, !skipped, !saved >>>>> # >>>>> # WARNING! the following will create a file that you must cycle from >>>>> # time to time as it will grow indefinitely. However, it will >>>>> # also keep all your messages if they scroll off the console. >>>>> # >>>>> append = "/var/log/bacula/bacula.log" = all, !skipped >>>>> catalog = all >>>>> } >>>>> >>>>> >>>>> # >>>>> # Message delivery for daemon messages (no job). >>>>> Messages { >>>>> Name = Daemon >>>>> mailcommand = "/usr/sbin/bsmtp -h localhost -f \"\(Bacula\) \<%r\>\" >>>>> -s \"Bacula daemon message\" %r" >>>>> mail = root = all, !skipped >>>>> console = all, !skipped, !saved >>>>> append = "/var/log/bacula/bacula.log" = all, !skipped >>>>> } >>>>> >>>>> # Default pool definition >>>>> Pool { >>>>> Name = Default >>>>> Pool Type = Backup >>>>> Label Format = Local- >>>>> Recycle = yes # Bacula can automatically >>>>> recycle >>>>> Volumes >>>>> AutoPrune = yes # Prune expired volumes >>>>> Volume Retention = 365 days # one year >>>>> Maximum Volume Bytes = 50G # Limit Volume size to something >>>>> reasonable >>>>> Maximum Volumes = 100 # Limit number of Volumes in >>>>> Pool >>>>> } >>>>> >>>>> # File Pool definition >>>>> Pool { >>>>> Name = File >>>>> Pool Type = Backup >>>>> Recycle = yes # Bacula can automatically >>>>> recycle >>>>> Volumes >>>>> AutoPrune = yes # Prune expired volumes >>>>> Volume Retention = 365 days # one year >>>>> Maximum Volume Bytes = 50G # Limit Volume size to something >>>>> reasonable >>>>> Maximum Volumes = 100 # Limit number of Volumes in >>>>> Pool >>>>> Label Format = "Vol-" # Auto label >>>>> } >>>>> >>>>> >>>>> # Scratch pool definition >>>>> Pool { >>>>> Name = Scratch >>>>> Pool Type = Backup >>>>> } >>>>> >>>>> # >>>>> # Restricted console used by tray-monitor to get the status of the >>>>> director >>>>> # >>>>> Console { >>>>> Name = local-1-mon >>>>> # Name = local-1.us-central1-a.c.lindswp.internal-mon >>>>> Password = "XO-HXl" >>>>> CommandACL = status, .status >>>>> } >>>>> >>>>> ******************************************************************************************** >>>>> bacula-sd.conf >>>>> >>>>> # Default Bacula Storage Daemon Configuration file >>>>> # >>>>> # For Bacula release 9.4.2 (04 February 2019) -- debian buster/sid >>>>> # >>>>> # You may need to change the name of your tape drive >>>>> # on the "Archive Device" directive in the Device >>>>> # resource. If you change the Name and/or the >>>>> # "Media Type" in the Device resource, please ensure >>>>> # that dird.conf has corresponding changes. >>>>> # >>>>> # >>>>> # Copyright (C) 2000-2017 Kern Sibbald >>>>> # License: BSD 2-Clause; see file LICENSE-FOSS >>>>> # >>>>> >>>>> Storage { # definition of myself >>>>> Name = local-1-sd >>>>> # Name = local-1.us-central1-a.c.lindswp.internal-sd >>>>> SDPort = 9103 # Director's port >>>>> Working Directory = "/var/lib/bacula" >>>>> Pid Directory = "/run/bacula" >>>>> Plugin Directory = "/usr/lib/bacula" >>>>> Maximum Concurrent Jobs = 20 >>>>> SDAddress = 10.8.0.1 >>>>> } >>>>> >>>>> # >>>>> # List Directors who are permitted to contact Storage daemon >>>>> # >>>>> Director { >>>>> Name = local-1-dir >>>>> # Name = local-1.us-central1-a.c.lindswp.internal-dir >>>>> Password = "Y32Xmm" >>>>> } >>>>> >>>>> # >>>>> # Restricted Director, used by tray-monitor to get the >>>>> # status of the storage daemon >>>>> # >>>>> Director { >>>>> Name = local-1-mon >>>>> # Name = local-1.us-central1-a.c.lindswp.internal-mon >>>>> Password = "QO7-5i8" >>>>> Monitor = yes >>>>> } >>>>> >>>>> # >>>>> # Note, for a list of additional Device templates please >>>>> # see the directory <bacula-source>/examples/devices >>>>> # Or follow the following link: >>>>> # >>>>> http://www.bacula.org/git/cgit.cgi/bacula/tree/bacula/examples/devices?h=Branch-7.4 >>>>> # >>>>> >>>>> # >>>>> # Devices supported by this Storage daemon >>>>> # To connect, the Director's bacula-dir.conf must have the >>>>> # same Name and MediaType. >>>>> # >>>>> >>>>> # >>>>> # Define a Virtual autochanger >>>>> # >>>>> Autochanger { >>>>> Name = FileChgr1 >>>>> Device = FileChgr1-Dev1 >>>>> # Device = FileChgr1-Dev1, FileChgr1-Dev2 >>>>> Changer Command = "" >>>>> Changer Device = /dev/null >>>>> } >>>>> >>>>> Device { >>>>> Name = FileChgr1-Dev1 >>>>> Media Type = File1 >>>>> Archive Device = /mnt/storage/bacula/backup >>>>> LabelMedia = yes; # lets Bacula label unlabeled >>>>> media >>>>> Random Access = Yes; >>>>> AutomaticMount = yes; # when device opened, read it >>>>> RemovableMedia = no; >>>>> AlwaysOpen = no; >>>>> Maximum Concurrent Jobs = 5 >>>>> } >>>>> >>>>> Device { >>>>> Name = FileChgr1-Dev2 >>>>> Media Type = File1 >>>>> Archive Device = /mnt/storage/bacula/backup >>>>> LabelMedia = yes; # lets Bacula label unlabeled >>>>> media >>>>> Random Access = Yes; >>>>> AutomaticMount = yes; # when device opened, read it >>>>> RemovableMedia = no; >>>>> AlwaysOpen = no; >>>>> Maximum Concurrent Jobs = 5 >>>>> } >>>>> >>>>> # >>>>> # Define a second Virtual autochanger >>>>> # >>>>> Autochanger { >>>>> Name = FileChgr2 >>>>> # Device = FileChgr2-Dev1 >>>>> Device = FileChgr2-Dev1, FileChgr2-Dev2 >>>>> Changer Command = "" >>>>> Changer Device = /dev/null >>>>> } >>>>> >>>>> Device { >>>>> Name = FileChgr2-Dev1 >>>>> Media Type = File2 >>>>> Archive Device = /nonexistant/path/to/file/archive/dir >>>>> LabelMedia = yes; # lets Bacula label unlabeled >>>>> media >>>>> Random Access = Yes; >>>>> AutomaticMount = yes; # when device opened, read it >>>>> RemovableMedia = no; >>>>> AlwaysOpen = no; >>>>> Maximum Concurrent Jobs = 5 >>>>> } >>>>> >>>>> Device { >>>>> Name = FileChgr2-Dev2 >>>>> Media Type = File2 >>>>> Archive Device = /nonexistant/path/to/file/archive/dir >>>>> LabelMedia = yes; # lets Bacula label unlabeled >>>>> media >>>>> Random Access = Yes; >>>>> AutomaticMount = yes; # when device opened, read it >>>>> RemovableMedia = no; >>>>> AlwaysOpen = no; >>>>> Maximum Concurrent Jobs = 5 >>>>> } >>>>> >>>>> >>>>> >>>>> # >>>>> # An autochanger device with two drives >>>>> # >>>>> #Autochanger { >>>>> # Name = Autochanger >>>>> # Device = Drive-1 >>>>> # Device = Drive-2 >>>>> # Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" >>>>> # Changer Device = /dev/sg0 >>>>> #} >>>>> >>>>> #Device { >>>>> # Name = Drive-1 # >>>>> # Drive Index = 0 >>>>> # Media Type = DLT-8000 >>>>> # Archive Device = /dev/nst0 >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes; >>>>> # RemovableMedia = yes; >>>>> # RandomAccess = no; >>>>> # AutoChanger = yes >>>>> # # >>>>> # # New alert command in Bacula 9.0.0 >>>>> # # Note: you must have the sg3_utils (rpms) or the >>>>> # # sg3-utils (deb) installed on your system. >>>>> # # and you must set the correct control device that >>>>> # # corresponds to the Archive Device >>>>> # Control Device = /dev/sg?? # must be SCSI ctl for /dev/nst0 >>>>> # Alert Command = "/etc/bacula/scripts/tapealert %l" >>>>> # >>>>> # # >>>>> # # Enable the Alert command only if you have the mtx package loaded >>>>> # # Note, apparently on some systems, tapeinfo resets the SCSI >>>>> controller >>>>> # # thus if you turn this on, make sure it does not reset your SCSI >>>>> # # controller. I have never had any problems, and smartctl does >>>>> # # not seem to cause such problems. >>>>> # # >>>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>>>> # If you have smartctl, enable this, it has more info than tapeinfo >>>>> # Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> #Device { >>>>> # Name = Drive-2 # >>>>> # Drive Index = 1 >>>>> # Media Type = DLT-8000 >>>>> # Archive Device = /dev/nst1 >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes; >>>>> # RemovableMedia = yes; >>>>> # RandomAccess = no; >>>>> # AutoChanger = yes >>>>> # # Enable the Alert command only if you have the mtx package loaded >>>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>>>> # If you have smartctl, enable this, it has more info than tapeinfo >>>>> # Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> # >>>>> # A Linux or Solaris LTO-2 tape drive >>>>> # >>>>> #Device { >>>>> # Name = LTO-2 >>>>> # Media Type = LTO-2 >>>>> # Archive Device = /dev/nst0 >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes; >>>>> # RemovableMedia = yes; >>>>> # RandomAccess = no; >>>>> # Maximum File Size = 3GB >>>>> ## Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" >>>>> ## Changer Device = /dev/sg0 >>>>> ## AutoChanger = yes >>>>> # # Enable the Alert command only if you have the mtx package loaded >>>>> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>>>> ## If you have smartctl, enable this, it has more info than tapeinfo >>>>> ## Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> # >>>>> # A Linux or Solaris LTO-3 tape drive >>>>> # >>>>> #Device { >>>>> # Name = LTO-3 >>>>> # Media Type = LTO-3 >>>>> # Archive Device = /dev/nst0 >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes; >>>>> # RemovableMedia = yes; >>>>> # RandomAccess = no; >>>>> # Maximum File Size = 4GB >>>>> # Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" >>>>> # Changer Device = /dev/sg0 >>>>> # AutoChanger = yes >>>>> # # >>>>> # # New alert command in Bacula 9.0.0 >>>>> # # Note: you must have the sg3_utils (rpms) or the >>>>> # # sg3-utils (deb) installed on your system. >>>>> # # and you must set the correct control device that >>>>> # # corresponds to the Archive Device >>>>> # Control Device = /dev/sg?? # must be SCSI ctl for /dev/nst0 >>>>> # Alert Command = "/etc/bacula/scripts/tapealert %l" >>>>> # >>>>> # # Enable the Alert command only if you have the mtx package loaded >>>>> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>>>> ## If you have smartctl, enable this, it has more info than tapeinfo >>>>> ## Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> # >>>>> # A Linux or Solaris LTO-4 tape drive >>>>> # >>>>> #Device { >>>>> # Name = LTO-4 >>>>> # Media Type = LTO-4 >>>>> # Archive Device = /dev/nst0 >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes; >>>>> # RemovableMedia = yes; >>>>> # RandomAccess = no; >>>>> # Maximum File Size = 5GB >>>>> # Changer Command = "/etc/bacula/scripts/mtx-changer %c %o %S %a %d" >>>>> # Changer Device = /dev/sg0 >>>>> # AutoChanger = yes >>>>> # # >>>>> # # New alert command in Bacula 9.0.0 >>>>> # # Note: you must have the sg3_utils (rpms) or the >>>>> # # sg3-utils (deb) installed on your system. >>>>> # # and you must set the correct control device that >>>>> # # corresponds to the Archive Device >>>>> # Control Device = /dev/sg?? # must be SCSI ctl for /dev/nst0 >>>>> # Alert Command = "/etc/bacula/scripts/tapealert %l" >>>>> # >>>>> # # Enable the Alert command only if you have the mtx package loaded >>>>> ## Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>>>> ## If you have smartctl, enable this, it has more info than tapeinfo >>>>> ## Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> # >>>>> # An HP-UX tape drive >>>>> # >>>>> #Device { >>>>> # Name = Drive-1 # >>>>> # Drive Index = 0 >>>>> # Media Type = DLT-8000 >>>>> # Archive Device = /dev/rmt/1mnb >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes; >>>>> # RemovableMedia = yes; >>>>> # RandomAccess = no; >>>>> # AutoChanger = no >>>>> # Two EOF = yes >>>>> # Hardware End of Medium = no >>>>> # Fast Forward Space File = no >>>>> # # >>>>> # # New alert command in Bacula 9.0.0 >>>>> # # Note: you must have the sg3_utils (rpms) or the >>>>> # # sg3-utils (deb) installed on your system. >>>>> # # and you must set the correct control device that >>>>> # # corresponds to the Archive Device >>>>> # Control Device = /dev/sg?? # must be SCSI ctl for /dev/rmt/1mnb >>>>> # Alert Command = "/etc/bacula/scripts/tapealert %l" >>>>> # >>>>> # # >>>>> # # Enable the Alert command only if you have the mtx package loaded >>>>> # Alert Command = "sh -c 'tapeinfo -f %c |grep TapeAlert|cat'" >>>>> # If you have smartctl, enable this, it has more info than tapeinfo >>>>> # Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> # >>>>> # A FreeBSD tape drive >>>>> # >>>>> #Device { >>>>> # Name = DDS-4 >>>>> # Description = "DDS-4 for FreeBSD" >>>>> # Media Type = DDS-4 >>>>> # Archive Device = /dev/nsa1 >>>>> # AutomaticMount = yes; # when device opened, read it >>>>> # AlwaysOpen = yes >>>>> # Offline On Unmount = no >>>>> # Hardware End of Medium = no >>>>> # BSF at EOM = yes >>>>> # Backward Space Record = no >>>>> # Fast Forward Space File = no >>>>> # TWO EOF = yes >>>>> # # >>>>> # # New alert command in Bacula 9.0.0 >>>>> # # Note: you must have the sg3_utils (rpms) or the >>>>> # # sg3-utils (deb) installed on your system. >>>>> # # and you must set the correct control device that >>>>> # # corresponds to the Archive Device >>>>> # Control Device = /dev/sg?? # must be SCSI ctl for /dev/nsa1 >>>>> # Alert Command = "/etc/bacula/scripts/tapealert %l" >>>>> # >>>>> # If you have smartctl, enable this, it has more info than tapeinfo >>>>> # Alert Command = "sh -c 'smartctl -H -l error %c'" >>>>> #} >>>>> >>>>> # >>>>> # Send all messages to the Director, >>>>> # mount messages also are sent to the email address >>>>> # >>>>> Messages { >>>>> Name = Standard >>>>> director = local-1-dir = all >>>>> # director = local-1.us-central1-a.c.lindswp.internal-dir = all >>>>> } >>>>> >>>>> *************************************************************************************************** >>>>> En el cliente >>>>> >>>>> bacula-fd.conf >>>>> >>>>> # >>>>> # Default Bacula File Daemon Configuration file >>>>> # >>>>> # For Bacula release 9.4.2 (04 February 2019) -- debian buster/sid >>>>> # >>>>> # There is not much to change here except perhaps the >>>>> # File daemon Name to >>>>> # >>>>> # >>>>> # Copyright (C) 2000-2015 Kern Sibbald >>>>> # License: BSD 2-Clause; see file LICENSE-FOSS >>>>> # >>>>> >>>>> # >>>>> # List Directors who are permitted to contact this File daemon >>>>> # >>>>> Director { >>>>> Name = local-1-dir >>>>> Password = "lYK83" >>>>> } >>>>> >>>>> # >>>>> # Restricted Director, used by tray-monitor to get the >>>>> # status of the file daemon >>>>> # >>>>> Director { >>>>> Name = local-1-mon >>>>> Password = "QO7-5i8" >>>>> Monitor = yes >>>>> } >>>>> >>>>> # >>>>> # "Global" File daemon configuration specifications >>>>> # >>>>> FileDaemon { # this is me >>>>> Name = certback-1-fd >>>>> FDport = 9102 # where we listen for the director >>>>> WorkingDirectory = /var/lib/bacula >>>>> Pid Directory = /run/bacula >>>>> Maximum Concurrent Jobs = 20 >>>>> Plugin Directory = /usr/lib/bacula >>>>> FDAddress = 10.8.0.10 >>>>> } >>>>> >>>>> # Send all messages except skipped files back to Director >>>>> Messages { >>>>> Name = Standard >>>>> director = local-1-dir = all, !skipped, !restored >>>>> } >>>>> >>>>> -- >>>>> Julian >>>>> >>>>> >>>> >>> >>> -- >>> Julian Daich <julia...@gmail.com> >>> >> > > -- > Julian Daich <julia...@gmail.com> >