Has levantadoel interfaz wlan0? Debes de ejecutar ifconfig wlan0 up dirección-de-red o si estas conectando a un AP que de servicio por dhcp debes de usar pump o dhcp-client.
El vie, 23-01-2004 a las 10:50, Vicente Lopez escribió: > Hola, tengo el siguiente problema: > > 1 ZoomAir 4105 con adaptador PCI->PCMCIA > 1 Debian Linux en un K6-500 > > Cuando hago un "uname": > > > code: > ______________________________________________________________ > # uname --all > Linux penelope 2.4.18-bf2.4 #1 Son Apr 14 09:53:28 CEST 2002 i586 > unknown > > ______________________________________________________________ > > > Cuando hago un "cardctl": > > > code: > ______________________________________________________________ > # cardctl ident > Socket 0: > product info: "ZoomAir 11Mbps High", "Rate wireless Networking", > "", "" > manfid: 0x0156, 0x0002 > function: 6 (network) > > ______________________________________________________________ > > > mi "iwconfig": > > > code: > ______________________________________________________________ > # iwconfig > lo no wireless extensions. > > eth0 no wireless extensions. > > ______________________________________________________________ > > que ocurre..., no tengo ni idea. > > en "mesage" en "/var/logs/" > code: > ______________________________________________________________ > Dec 22 13:02:30 penelope kernel: Linux PCMCIA Card Services 3.1.33 > Dec 22 13:02:30 penelope kernel: kernel build: 2.4.18-bf2.4 unknown > Dec 22 13:02:30 penelope kernel: options: [pci] [cardbus] [apm] > Dec 22 13:02:30 penelope kernel: Intel ISA/PCI/CardBus PCIC probe: > Dec 22 13:02:30 penelope kernel: PCI: Enabling device 00:09.0 (0000 > -> 0002) > Dec 22 13:02:30 penelope kernel: PCI: Assigned IRQ 5 for device > 00:09.0 > Dec 22 13:02:30 penelope kernel: TI 1410 rev 01 PCI-to-CardBus at > slot 00:09, mem 0x10000000 > Dec 22 13:02:30 penelope kernel: host opts [0]: [serial pci & > irq] [pci irq 5] [lat 168/176] [bus 2/5] > Dec 22 13:02:30 penelope kernel: PCI irq 5 test failed > Dec 22 13:02:30 penelope kernel: ISA irqs (scanned) = none!<6> > *NO* card interrupts, polling interval = 1000 ms > Dec 22 13:02:31 penelope kernel: cs: memory probe > 0xa0000000-0xa0ffffff: clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0100-0x04ff: > excluding 0x290-0x297 0x378-0x37f 0x3c0-0x3df 0x480-0x48f 0x4d0-0x4d7 > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0298-0x0377: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0380-0x03bf: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x03e0-0x047f: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0490-0x04cf: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x04d8-0x04ff: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0800-0x08ff: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0a00-0x0aff: > clean. > Dec 22 13:02:31 penelope kernel: cs: IO port probe 0x0c00-0x0cff: > clean. > Dec 22 13:02:31 penelope kernel: orinoco_cs: RequestIRQ: Resource in > use > > ______________________________________________________________ > > > que quiere decir esto???? > > que puedo hacer. > muchas gracias... > > Vicente Lopez Solis > Instalaciones Solis Muñoz SL > --