"modconf ile modulu kaldiriyorum yine yok kuruyorum
yine yok" diye yazmistim.
ayni karti iki defa gordugunu ben de farkettim
yanliz modconf ile modulu kaldirdigimda eth1 gidiyor ama yine de eth0
calismiyor. sanirim eth0`in calismamasinin sebebi de modulun olmamasi. modulu
tekrar kurdugumda, insmod`un sonucunda olarak kart tekrar eth1 olarak
gorunuyor.
pci slot`unu da degistirdim.
ayrica kart w2k ve w98`te ile problemsiz
calisiyor.
----- Original Message -----
Sent: Thursday, May 22, 2003 4:22
AM
Subject: ag
ifconfig .. eth0 .. gibi seyler yazdigimda
temporarily unavailable diyor
ifconfig .. eth1 .. icin de device busy
diyor
modconf ile modulu kaldiriyorum yine yok kuruyorum yine yok
ilginc bir sey ifconfig dedigimde sade lo geliyor eth0 yok ifconfig eth0
dedigimde dogru ip ile beraber geliyor
bir diger sey route dedigimde ekrana hicbir sey gelmiyor (127.0.0.1 de
yok)
ben nerde hata yapiyorum.
dmesg ciktisi ise soyle
Linux version 2.2.20-idepci ([EMAIL PROTECTED])
(gcc version 2.7.2.3) #1 Sat Apr 20 12:45:19 EST 2002 BIOS-provided
physical RAM map: BIOS-e820: 0009f000 @ 00000000
(usable) BIOS-e820: 0fefc000 @ 00100000 (usable) Detected 602201
kHz processor. Console: colour VGA+ 80x25 Calibrating delay loop...
1202.58 BogoMIPS Memory: 257636k/262128k available (1164k kernel code, 412k
reserved, 2844k data, 72k init) Dentry hash table entries: 32768 (order 6,
256k) Buffer cache hash table entries: 262144 (order 8, 1024k) Page
cache hash table entries: 65536 (order 6, 256k) Intel machine check
architecture supported. Intel machine check reporting enabled on
CPU#0. 256K L2 cache (8 way) CPU: L2 Cache: 256K CPU: Intel Pentium
III (Coppermine) stepping 03 Checking 386/387 coupling... OK, FPU using
exception 16 error reporting. Checking 'hlt' instruction... OK. Checking
for popad bug... OK. POSIX conformance testing by UNIFIX mtrr: v1.35a
(19990819) Richard Gooch ([EMAIL PROTECTED]) PCI: PCI BIOS
revision 2.10 entry at 0xf0890 PCI: Using configuration type 1 PCI:
Probing PCI hardware PCI: Enabling I/O for device 00:50 PCI: Enabling
I/O for device 00:60 PCI: Enabling memory for device 00:60 PCI: 00:20
[1106/0596]: Work around ISA DMA hangs (00) Activating ISA DMA hang
workarounds. Linux NET4.0 for Linux 2.2 Based upon Swansea University
Computer Society NET3.039 NET4: Unix domain sockets 1.0 for Linux
NET4.0. NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP,
TCP TCP: Hash tables configured (ehash 262144 bhash 65536) Starting
kswapd v 1.5 vga16fb: initializing vga16fb: mapped to
0xc00a0000 Console: switching to colour frame buffer device 80x30 fb0:
VGA16 VGA frame buffer device Serial driver version 4.27 with HUB-6
MANY_PORTS MULTIPORT SHARE_IRQ enabled ttyS00 at 0x03f8 (irq = 4) is a
16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A pty: 256 Unix98 ptys
configured RAM disk driver initialized: 16 RAM disks of 4096K
size loop: registered device at major 7 VP_IDE: IDE controller on PCI
bus 00 dev 21 VP_IDE: not 100% native mode: will probe irqs
later ide0: BM-DMA at 0xb800-0xb807, BIOS settings:
hda:DMA, hdb:pio ide1: BM-DMA at 0xb808-0xb80f, BIOS
settings: hdc:pio, hdd:DMA hda: IC35L040AVER07-0, ATA DISK drive hdd:
ASUS CD-S500/A, ATAPI CDROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq
14 ide1 at 0x170-0x177,0x376 on irq 15 hda: IC35L040AVER07-0, 39266MB
w/1916kB Cache, CHS=5005/255/63 hdd: ATAPI 50X CD-ROM drive, 128kB
Cache Uniform CD-ROM driver Revision: 3.11 Floppy drive(s): fd0 is
1.44M FDC 0 is a post-1991 82077 3c59x.c 18Feb01 Donald Becker and
others http://www.scyld.com/network/vortex.html pcnet32.c:
PCI bios is present, checking for devices... rtl8139.c:v1.07 5/6/99 Donald
Becker http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html eth0:
RealTek RTL8139 Fast Ethernet at 0xa800, IRQ 0,
00:90:47:02:cf:af. via-rhine.c:v1.08b-LK1.0.1 12/14/2000 Written by
Donald Becker http://www.scyld.com/network/via-rhine.html Partition
check: hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10
> apm: BIOS version 1.2 Flags 0x0b (Driver version 1.13) apm:
disabled on user request. VFS: Mounted root (ext2 filesystem)
readonly. Freeing unused kernel memory: 72k freed Adding Swap: 666656k
swap-space (priority -1) lp: no devices found lp: no devices
found lp: no devices found lp: no devices found lp: no devices
found lp: no devices found eth1: 8139too Fast Ethernet driver
0.9.18-pre4 Jeff Garzik <[EMAIL PROTECTED]> eth1:
Linux-2.2 bug reports to Jens David <[EMAIL PROTECTED]> eth1:
RealTek RTL8139 Fast Ethernet board found at 0xd0072000, IRQ 0 eth1: Chip
is 'RTL-8139C' - MAC address
'00:90:47:02:cf:af'.
|