On 03.09.2002 12:55 Sheldon E. Auerbach wrote: > At 12:05 PM 9/3/02 -0300, Marcelo Chiapparini <[EMAIL PROTECTED]> wrote: >> Hello, >> >> I am running woody plus xfree86 4.1.0-16 in a pentium pro machine. >> The video card has a s3 virge chipset, so, the xserver-xfree86 runs >> its s3virge drive. I have the following problem: at resolutions of >> 1024x768 or better, each time the screen is updated appear spurious >> horizontal line on it. The problem becomes worse for the high >> resolutions. At resolutions lower than the 1024x768 the problem >> disappears. Does exist a bug in the s3virge drive of xfree86 4.1? >> should I move to xfree86 3.3.6? >> >> Thanks in advance for the help! >> >> Marcelo > > > I suspect that the problem is in the nature of the s3virge card. In > the past I have had a similar problem running Windows with the > vendors own driver. In my case the spurious horizontal lines were > only occational. >
Sheldon, thanks a lot for your email. If you are right, there is nothing I can do, except change the video card. The remarkable thing is that when I was running xfree86 3.3.6, there was no problem with the s3-server... Marcelo -- Marcelo Chiapparini DFT-IF/UERJ [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]