Hi, I want to use diald with dsl, but diald cannot connect and report the following error in syslog. I configured diald with the installation script.
Sep 12 15:31:38 matti diald[1450]: Diald initial setup completed. Sep 12 15:31:42 matti diald[1450]: filter accepted rule 27 proto 134624192 len 59 packet 192.168.0.1,32770 => 194.8.194.60,53 Sep 12 15:31:42 matti diald[1450]: Trigger: udp 192.168.0.1/32770 194.8.194.60/53 Sep 12 15:31:42 matti diald[1450]: new state CONNECT action 0x8051200 timeout 90 Sep 12 15:31:42 matti diald[1450]: Calling site 192.168.0.2 Sep 12 15:31:42 matti diald[1450]: No devices free to call out on. Sep 12 15:31:42 matti diald[1450]: Connect script failed. Sep 12 15:31:42 matti diald[1450]: new state CLOSE action 0x8051a2c timeout -1 Sep 12 15:31:42 matti diald[1450]: Delaying 1 seconds before clear to dial. Sep 12 15:31:42 matti diald[1450]: new state RETRY action 0x8051bd8 timeout -1 Sep 12 15:31:43 matti diald[1450]: new state DOWN action 0x8051138 timeout -1 Sep 12 15:31:44 matti diald[1450]: new state CONNECT action 0x8051200 timeout 90 Sep 12 15:31:44 matti diald[1450]: Calling site 192.168.0.2 Sep 12 15:31:44 matti diald[1450]: No devices free to call out on. Sep 12 15:31:44 matti diald[1450]: Connect script failed. Does any one has working configuration files or a hint. I also tried to find out which script diald is running but I cannot find it even with strace not. Kind Regards Martin -- Martin Bruns mailto:[EMAIL PROTECTED] fon: +49 221 2792134 Weinsbergstr. 92 fax: +49 221 2792138 50823 Cologne mob: +49 173 5320086 Germany -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
