-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Tuesday 01 October 2002 00:08, Sergio Mendoza wrote: > Hi, > > Have two i386 computers running Debian. Computer A has two network > cards: eth0 (XXX.XXX.X.X) and eth1 (192.168.0.1). > eth0 is connected to the internet and eth1 is supposed to connect to > an internal network (192.168.0.0). The netmask for both is > 255.255.255.0. eth0 works absolutely perfect! > > > Now, I have a laptop (computer B) with a pcmcia card eth0 > (192.168.0.2) with netmask 255.255.255.0. > > Computer A is connected to computer B and ... nothing! I can't > get the connection! Basically, the internal network is not working! > What's going on?
Now, it has already be mentioned that you'll need a crossover cable or connect the computers via a hub. A hub or switch would be especially nice at least to try if you get a connection, blinking lights are a wonderful thing. Are both cards reporting link and activity if you, say, send pings between the machines? Two more things from my personal anecdote chest, both about strange and more or less rare error conditions: If comp. A's card is 10/100 and the PCMCIA card is 10Mbit only, try to throttle the A card down to 10MBit. This should not be an issue, but has caused me problems on older hardware that apparently couldn't auto-sync. Try using an unshielded cable to hook up B. Each and every PCMCIA card that I tried refused to work with shielded cables (with shielded plugs, you recognize those by the metal tongs on the side of the plug). Unshielded cables (plasic-only plugs) worked perfectly. - -- Embedded Linux -- True multitasking! TWO TOASTS AT THE SAME TIME! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.0.7 (GNU/Linux) iD8DBQE9mNz4eOF0+zcVdv8RAvYAAJ9UkNCoCXSGlMkK82dfXNBwk3l/+QCfX9dk /RFfPcmAmpSOfXHXS56oNDE= =yXT9 -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]