On Tue, Oct 15, 2002 at 09:37:05AM -0700, Jon Leonard wrote: > On Mon, Oct 14, 2002 at 10:24:55PM -0400, Neal Lippman wrote: > > I decided to have a go at getting debian installed on my Thinkpad 770ED; > > mostly I was able to get the initial module configuration to work (a few > > glitches, but I can work those out later). However, until I can get > > networking up and running, I cannot continue the install. > > > > I have a Linksys 10/100 PC card (PCMCIA), but I cannot figure out what > > the correct driver is for this. Anyone have any information? > > > > The card is a mode PCMPC100, for what it's worth. > > It matters which version of the PCMPC100, actually. I've had both v2 and v3 > versions of the card, and they use different drivers. Apparently the v1 > used a third driver... IIRC, the v2 used a tulip_cb driver. I don't > remember the driver for the v3; I can look it up when I get home if it > winds up mattering.
v3 uses axnet_cs, I used to have what I presume was a v1 (no version on it), and upon insertion it loaded pcnet_cs. I'm not totally sure if that _is_ the correct driver, as that NIC was nonfunctional (and through its warrantee, I got my v3). -- Seneca [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
