On Thu, 2002-10-17 at 23:01, Raghavendra Bhat wrote: > Joe T. posts: > > >> How do I find and/or set my eth0 interface to 100 Mb/s full duplex? > > I use this command to set the speed of my eepro card to 10 MBps full > duplex. `mii-tool --force=10baseT-FD --log eth0', maybe you need to > substitute 100baseT-FD in lieu of 10baseT-FD. You should start this > command via the run-level init scripts, preferably a level of 25 in > the rcS.d symlink dir. >
I have fillowing in the /etc/modutils/3c59x file: post-install 3c59x /sbin/mii-tool --force=100baseTx-FD I bet something similar would work for eepros. Just watchi it if you have more then one ethernet card that need to difference modes. Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]