Hi all,
I'm trying to make my "memory stick" (sony) internal reader work on a samsung x10 laptop.
This internal reader is in fact slot 0 of my RICOH yenta pcmcia controller. Right now I have :
$ /etc/init.d/pcmcia start Starting PCMCIA services: using yenta_socket instead of i82365 cardmgr[4713]: watching 2 sockets done.
$ pcic_probe PCI bridge probe: Ricoh RL5C476 found, 2 sockets.
When I insert my card, I get :
$ tail -f /var/log/daemon.log
Jun 29 18:15:23 etamine cardmgr[4793]: unsupported card in socket 0
Jun 29 18:15:23 etamine cardmgr[4793]: product info: "RICOH", "Bay Controller"
$ cardctl ident Socket 0: product info: "RICOH", "Bay Controller" manfid: 0x0000, 0x0000 function: 254 ((null)) Socket 1: no product info available
$ cardctl status Socket 0: 3.3V 16-bit PC Card function 0: [ready] Socket 1: no card
Then I have tried to fool cardmgr, and I added this in /etc/pcmcia/config :
card "Sony Memory Stick" manfid 0x0000, 0x0000 bind "ide-cs"
Then, if I restart cardmgr, I get a little bit further, but not much... :
$ /etc/init.d/pcmcia restart Shutting down PCMCIA services: done. Starting PCMCIA services: using yenta_socket instead of i82365 cardmgr[4952]: watching 2 sockets done.
I insert the card, and :
etamine:/home/franck# tail -f /var/log/daemon.log
Jun 29 18:20:25 etamine cardmgr[4953]: socket 0: Sony Memory Stick
Jun 29 18:20:25 etamine cardmgr[4953]: executing: 'modprobe ide-cs'
Jun 29 18:20:25 etamine cardmgr[4953]: get dev info on socket 0 failed: No such device
This is my first try with pcmcia, and I must admit that after reading the howto and trying my best, I lost... Has anyone a clue on that ?
Thanks in advance,
Franck
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
