I gave up on trying to get the SIIG compactflash card reader (USB)
(model us2256 or maybe model 02-0739A ) to work. My buddy
has this reader and he got his to work using knoppix version
from spring or summer of 2003. It automounted the flash
card as an icon on the desktop I think.
I installed a SOYO bayone (TM) avi6.1 and it read the
compact flash cards ok using the instructions you guys gave me.
Thanks,
J
--- On Thu 08/05, J F < [EMAIL PROTECTED] > wrote:
From: J F [mailto: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Date: Thu, 5 Aug 2004 00:10:12 -0400 (EDT)
Subject: Re: Getting photos from USB compactFlash into linux
<br>At the end of this transcript I found dmesg error:<br>usb 3-2: new full speed USB
device using address 20<br>usb 3-2: device not accepting address 20, error
-71<br><br>I am using hotplug package not usbmgr package.<br>I have read somewhere
that the USB device not accepting new address <br> means that the host-controller
doesn't get an interrupt, and that this <br> often is because of ACPI. <br>Still not
working. Will try some more tomorrow.<br><br><br>[EMAIL PROTECTED]:# fdisk -l
/dev/sda<br>[EMAIL PROTECTED]:# fdisk -l /dev/sd*<br>[EMAIL PROTECTED]:# mount -t
vfat /dev/sda1 /usb<br>mount: /dev/sda1 is not a valid block device<br>[EMAIL
PROTECTED]:/home/jfields# mount -t vfat /dev/sda /usb<br>mount: /dev/sda is not a
valid block device<br>[EMAIL PROTECTED]:/home/jfields# ls -l /usb<br>total 0<br>[EMAIL
PROTECTED]:/home/jfields# mount -t vfat /dev/sda2 /usb<br>mount: /dev/sda2 is not a
valid block device<br>[EMAIL PROTECTED]:/home/jfields# mount -t vfat /dev/sda3
/usb<br>mount: /dev/sda3 is not a valid
block device<br>[EMAIL PROTECTED]:/home/jfields# mount -t vfat /dev/sda4
/usb<br>mount: /dev/sda4 is not a valid block device<br>[EMAIL
PROTECTED]:/home/jfields# mount -t vfat /dev/sda5 /usb<br>mount: /dev/sda5 is not a
valid block device<br>[EMAIL PROTECTED]:/home/jfields# mount -t vfat /dev/sda6
/usb<br>mount: /dev/sda6 is not a valid block device<br>[EMAIL
PROTECTED]:/home/jfields# mount -t vfat /dev/sda7 /usb<br>mount: /dev/sda7 is not a
valid block device<br>[EMAIL PROTECTED]:/home/jfields# mount -t vfat /dev/sda8
/usb<br>mount: /dev/sda8 is not a valid block device<br>[EMAIL
PROTECTED]:/home/jfields# fdisk /dev/sda<br><br>Unable to open /dev/sda<br>[EMAIL
PROTECTED]:/home/jfields# fdisk /dev/sdb<br><br>Unable to open /dev/sdb<br>[EMAIL
PROTECTED]:/home/jfields# fdisk /dev/sdc<br><br>Unable to open /dev/sdc<br>[EMAIL
PROTECTED]:/home/jfields# ls -l /dev/sd*<br>brw-rw---- 1 root disk 8, 0 Apr 14
2001 /dev/sda<br>...<br><br>[EMAIL PROTECTED]:~# dmesg<br>Linux version 2.6.7-1-k7
([EMAIL PROTECTED]) (gcc
version 3.3.4 (Debian 1:3.3.4-2)) #1 Thu Jul 8 06:45:35 EDT 2004<br>BIOS-provided
physical RAM map:<br> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)<br>
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)<br> BIOS-e820:
00000000000f0000 - 0000000000100000 (reserved)<br> BIOS-e820: 0000000000100000 -
000000001fff0000 (usable)<br> BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI
data)<br> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)<br> BIOS-e820:
00000000fec00000 - 00000000fec01000 (reserved)<br> BIOS-e820: 00000000fee00000 -
00000000fee01000 (reserved)<br> BIOS-e820: 00000000ffee0000 - 00000000fff00000
(reserved)<br> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)<br>0MB
HIGHMEM available.<br>511MB LOWMEM available.<br>On node 0 totalpages: 131056<br> DMA
zone: 4096 pages, LIFO batch:1<br> Normal zone: 126960 pages, LIFO batch:16<br>
HighMem zone: 0 pages, LIFO batch:1<br>DMI 2.3 present.<br>ACPI: RSDP (v000 AMI
) @ 0x000fa2c0<br>ACPI: RSDT (v001 AMIINT SiS735XX 0x00001000
MSFT 0x0100000b) @ 0x1fff0000<br>ACPI: FADT (v001 AMIINT SiS735XX 0x00001000 MSFT
0x0100000b) @ 0x1fff0030<br>ACPI: DSDT (v001 SiS 735 0x00000100 MSFT
0x0100000d) @ 0x00000000<br>ACPI: PM-Timer IO Port: 0x808<br>Built 1
zonelists<br>Kernel command line: BOOT_IMAGE=Linux ro root=301<br>Local APIC disabled
by BIOS -- reenabling.<br>Found and enabled local APIC!<br>Initializing CPU#0<br>PID
hash table entries: 2048 (order 11: 16384 bytes)<br>Detected 1659.452 MHz
processor.<br>Using pmtmr for high-res timesource<br>Console: colour VGA+
80x25<br>Memory: 512440k/524224k available (1500k kernel code, 11020k reserved, 668k
data, 148k init, 0k highmem)<br>Checking if this processor honours the WP bit even in
supervisor mode... Ok.<br>Calibrating delay loop... 3301.37 BogoMIPS<br>Security
Scaffold v1.0.0 initialized<br>Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)<br>Inode-ca
che hash table entries: 32768 (order: 5, 131072 bytes)<br>Mount-cache hash table
entries: 512 (order: 0, 4096 bytes)<br>CPU: After gene
ric identify, caps: 0383fbff c1c3fbff 00000000 00000000<br>CPU: After vendor
identify, caps: 0383fbff c1c3fbff 00000000 00000000<br>CPU: L1 I Cache: 64K (64
bytes/line), D cache 64K (64 bytes/line)<br>CPU: L2 Cache: 256K (64
bytes/line)<br>CPU: After all inits, caps: 0383fbff c1c3fbff 00000000
00000020<br>Intel machine check architecture supported.<br>Intel machine check
reporting enabled on CPU#0.<br>CPU: AMD Athlon(tm) XP 2000+ stepping 00<br>Enabling
fast FPU save and restore... done.<br>Enabling unmasked SIMD FPU exception support...
done.<br>Checking 'hlt' instruction... OK.<br>enabled ExtINT on CPU#0<br>ESR value
before enabling vector: 00000000<br>ESR value after enabling vector: 00000000<br>Using
local APIC timer interrupts.<br>calibrating APIC timer ...<br>..... CPU clock speed is
1659.0406 MHz.<br>..... host bus clock speed is 265.0504 MHz.<br>checking if image is
initramfs...it isn't (ungzip failed); looks like an initrd<br>Freeing initrd memory:
4288k fre
ed<br>NET: Registered protocol family 16<br>PCI: PCI BIOS revision 2.10 entry at
0xfdb01, last bus=1<br>PCI: Using configuration type 1<br>mtrr: v2.0
(20020519)<br>ACPI: Subsystem revision 20040326<br>ACPI: IRQ9 SCI: Edge set to Level
Trigger.<br>ACPI: Interpreter enabled<br>ACPI: Using PIC for interrupt
routing<br>ACPI: PCI Root Bridge [PCI0] (00:00)<br>PCI: Probing PCI hardware (bus
00)<br>Uncovering SIS18 that hid as a SIS503 (compatible=1)<br>Enabling SiS 96x
SMBus.<br>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]<br>ACPI: Power Resource
[URP1] (off)<br>ACPI: Power Resource [URP2] (off)<br>ACPI: Power Resource [FDDP]
(off)<br>ACPI: Power Resource [LPTP] (off)<br>ACPI: PCI Interrupt Link [LNKA] (IRQs
*11)<br>ACPI: PCI Interrupt Link [LNKB] (IRQs *11)<br>ACPI: PCI Interrupt Link [LNKC]
(IRQs 3 4 5 7 *10 12 14 15)<br>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 12 14
15)<br>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 12 14 15) *0,
disabled.<br>ACPI: PCI Inte
rrupt Link [LNKF] (IRQs 3 4 5 7 10 12 14 15) *0, disabled.<br>ACPI: PCI Interrupt
Link [LNKG] (IRQs 3 4 5 7 *10 12 14 15)<br>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4
*5 7 10 12 14 15)<br>Linux Plug and Play Support v0.97 (c) Adam Belay<br>PnPBIOS:
Scanning system for PnP BIOS support...<br>PnPBIOS: Found PnP BIOS installation
structure at 0xc00f72a0<br>PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x5d47, dseg
0xf0000<br>spurious 8259A interrupt: IRQ7.<br>PnPBIOS: 14 nodes reported by PnP BIOS;
14 recorded by driver<br>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11<br>ACPI:
PCI Interrupt Link [LNKD] enabled at IRQ 10<br>ACPI: PCI Interrupt Link [LNKH] enabled
at IRQ 5<br>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10<br>ACPI: PCI Interrupt
Link [LNKG] enabled at IRQ 10<br>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ
11<br>PCI: Using ACPI for IRQ routing<br>VFS: Disk quotas dquot_6.5.1<br>Dquot-cache
hash table entries: 1024 (order 0, 4096 bytes)<br>devfs: 2004-01-31
Richard Gooch ([EMAIL PROTECTED])<br>devfs: boot_options: 0x0<br>Initializing
Cryptographic API<br>isapnp: Scanning for PnP cards...<br>isapnp: No Plug & Play
device found<br>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing
enabled<br>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A<br>ttyS1 at I/O 0x2f8 (irq = 3) is
a 16550A<br>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize<br>serio: i8042 AUX port at 0x60,0x64 irq 12<br>serio: i8042 KBD port at
0x60,0x64 irq 1<br>input: AT Translated Set 2 keyboard on isa0060/serio0<br>NET:
Registered protocol family 2<br>IP: routing cache hash table of 4096 buckets,
32Kbytes<br>TCP: Hash tables configured (established 32768 bind 65536)<br>NET:
Registered protocol family 8<br>NET: Registered protocol family 20<br>ACPI: (supports
S0 S1 S4 S5)<br>RAMDISK: cramfs filesystem found at block 0<br>RAMDISK: Loading 4288
blocks [1 disk] into ram disk... done.<br>VFS: Mounted root (cramfs filesystem)
readonly.<br>F
reeing unused kernel memory: 148k freed<br>vesafb: probe of vesafb0 failed with error
-6<br>NET: Registered protocol family 1<br>SCSI subsy
stem initialized<br>libata version 1.02 loaded.<br>Uniform Multi-Platform E-IDE
driver Revision: 7.00alpha2<br>ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx<br>SIS5513: IDE controller at PCI slot
0000:00:02.5<br>SIS5513: chipset revision 208<br>SIS5513: not 100% native mode: will
probe irqs later<br>SIS5513: SiS735 ATA 100 (2nd gen) controller<br> ide0: BM-DMA
at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA<br> ide1: BM-DMA at
0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA<br>hda: ST380021A, ATA DISK
drive<br>Using anticipatory io scheduler<br>ide0 at 0x1f0-0x1f7,0x3f6 on irq
14<br>hdc: CD-ROM 45X/A, ATAPI CD/DVD-ROM drive<br>ide1 at 0x170-0x177,0x376 on irq
15<br>hda: max request size: 128KiB<br>hda: 156301488 sectors (80026 MB) w/2048KiB
Cache, CHS=65535/16/63, UDMA(100)<br> /dev/ide/host0/bus0/target0/lun0: p1 p2
p3<br>kjournald starting. Commit interval 5 seconds<br>EXT3-fs: mounted filesystem
with ordered data mode.<br>Adding 49801
40k swap on /dev/hda2. Priority:-1 extents:1<br>EXT3 FS on hda1, internal
journal<br>Real Time Clock Driver v1.12<br>warning: process `update' used the obsolete
bdflush system call<br>Fix your initscripts?<br>apm: BIOS version 1.2 Flags 0x03
(Driver version 1.16ac)<br>apm: overridden by ACPI.<br>sis900.c: v1.08.07
11/02/2003<br>eth0: Realtek RTL8201 PHY transceiver found at address 1.<br>eth0: Using
transceiver found at address 1 as default<br>eth0: SiS 900 PCI Fast Ethernet at
0xd000, IRQ 10, 00:0a:e6:8a:53:b2.<br>Intel 810 + AC97 Audio, version 1.01, 07:03:46
Jul 8 2004<br>i810: SiS 7012 found at IO 0xd400 and 0xdc00, MEM 0x0000 and 0x0000,
IRQ 10<br>i810_audio: Audio Controller supports 2 channels.<br>i810_audio: Defaulting
to base 2 channel mode.<br>i810_audio: Resetting connection 0<br>ac97_codec: AC97
codec, id: CMI65 (CMedia)<br>AC97 codec does not have proper volume
support.<br>i810_audio: only 48Khz playback available.<br>i810_audio: AC'97 codec 0
Unable to map s
urround DAC's (or DAC's not present), total channels = 2<br>Linux agpgart interface
v0.100 (c) Dave Jones<br>NET: Registered protocol family 17<br>usbcore: registered new
driver usbfs<br>usbcore: registered new driver hub<br>Initializing USB Mass Storage
driver...<br>usbcore: registered new driver usb-storage<br>USB Mass Storage support
registered.<br>Capability LSM initialized<br>device-mapper: 4.1.0-ioctl (2003-12-10)
initialised: [EMAIL PROTECTED]<br>md: md driver 0.90.0 MAX_MD_DEVS=256,
MD_SB_DISKS=27<br>eth0: Media Link On 10mbps half-duplex<br>eth0: Media Link On 10mbps
half-duplex<br>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)<br>apm:
overridden by ACPI.<br>NET: Registered protocol family 10<br>Disabled Privacy
Extensions on device c02f17c0(lo)<br>IPv6 over IPv4 tunneling driver<br>agpgart:
Detected SiS 735 chipset<br>agpgart: Maximum main memory to use for agp memory:
439M<br>agpgart: AGP aperture is 64M @ 0xd0000000<br>cpci_hotplug: CompactPCI Hot Plug
Core version: 0.2<br>pci_hotplug: PCI Hot Plug PCI Core version: 0.5<br>pciehp: PCI
Express Hot Plug Controller Driver version: 0.4<br>shpchp: shpc_init : shpc_cap_offset
== 0<br>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4<br>ohci_hcd: 2004
Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)<br>ohci_hcd: block sizes: ed
64 td 64<br>ohci_hcd 0000:00:02.2: Silicon Integrated Systems [SiS] USB 1.0
Controller<br>ohci_hcd 0000:00:02.2: irq 10, pci mem e083b000<br>ohci_hcd
0000:00:02.2: new USB bus registered, assigned bus number 1<br>hub 1-0:1.0: USB hub
found<br>hub 1-0:1.0: 3 ports detected<br>ohci_hcd 0000:00:02.3: Silicon Integrated
Systems [SiS] USB 1.0 Controller (#2)<br>ohci_hcd 0000:00:02.3: irq 5, pci mem
e085b000<br>ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number
2<br>hub 2-0:1.0: USB hub found<br>hub 2-0:1.0: 3 ports detected<br>USB Universal Host
Controller Interface driver v2.2<br>uhci_hcd 0000:00:13.0: VIA Technologies, Inc.
VT82xxxxx UHCI USB 1.1 Controller<br>uhci_hcd 0000:00:13.0: irq 11, io base
0000c800<br>uhci_hcd 0000:00:13.0: new USB bus registered, ass
igned bus number 3<br>hub 3-0:1.0: USB hub found<br>hub 3-0:1.0: 2 ports
detected<br>uhci_hcd 0000:00:13.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2)<br>uhci_hcd 0000:00:13.1: irq 11, io base 0000cc00<br>uhci_hcd
0000:00:13.1: new USB bus registered, assigned bus number 4<br>hub 4-0:1.0: USB hub
found<br>hub 4-0:1.0: 2 ports detected<br>ehci_hcd 0000:00:13.2: VIA Technologies,
Inc. USB 2.0<br>ehci_hcd 0000:00:13.2: irq 10, pci mem e0ca1f00<br>ehci_hcd
0000:00:13.2: new USB bus registered, assigned bus number 5<br>ehci_hcd 0000:00:13.2:
USB 2.0 enabled, EHCI 0.95, driver 2004-May-10<br>hub 5-0:1.0: USB hub found<br>hub
5-0:1.0: 4 ports detected<br>eth0: no IPv6 routers present<br>parport: PnPBIOS parport
detected.<br>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]<br>lp0: using
parport0 (interrupt-driven).<br>apm: BIOS version 1.2 Flags 0x03 (Driver version
1.16ac)<br>apm: overridden by ACPI.<br>apm: BIOS version 1.2 Flags 0x03 (Driver
version 1.16ac)<
br>apm: overridden by ACPI.<br>input: ImPS/2 Generic Wheel Mouse on
isa0060/serio1<br>mice: PS/2 mouse device common for all mice<br>ts: Compaq
touchscreen protocol output<br>usb 3-2: new full speed USB device using address
2<br>usb 3-2: device not accepting address 2, error -71<br>usb 3-2: new full speed USB
device using address 3<br>usb 3-2: device not accepting address 3, error -71<br>usb
3-2: new full speed USB device using address 4<br>usb 3-2: device not accepting
address 4, error -71<br>NET: Registered protocol family 4<br>NET: Registered protocol
family 3<br>NET: Registered protocol family 5<br>usb 3-2: new full speed USB device
using address 5<br>usb 3-2: device not accepting address 5, error -71<br>usb 3-2: new
full speed USB device using address 6<br>usb 3-2: device not accepting address 6,
error -71<br>usb 3-2: new full speed USB device using address 7<br>usb 3-2: device not
accepting address 7, error -71<br>usb 3-2: new full speed USB device using address
8<br>u
sb 3-2: device not accepting address 8, error -71<br>usb 3-2: new full speed USB
device using address 9<br>usb 3-2: device not accepting address 9, error -71<br>usb
3-2: new full speed USB device using address 10<br>usb 3-2: device not accepting
address 10, error -71<br>usb 3-2: new full speed USB device using address 11<br>usb
3-2: device not accepting address 11, error -71<br>usb 3-2: new full speed USB device
using address 12<br>usb 3-2: device not accepting address 12, error -71<br>usb 3-2:
new full speed USB device using address 13<br>usb 3-2: device not accepting address
13, error -71<br>usb 3-2: new full speed USB device using address 14<br>usb 3-2:
device not accepting address 14, error -71<br>usb 3-2: new full speed USB device using
address 15<br>usb 3-2: device not accepting address 15, error -71<br>usb 3-2: new full
speed USB device using address 16<br>usb 3-2: device not accepting address 16, error
-71<br>usb 3-2: new full speed USB device using address 17<br>usb
3-2: device not accepting address 17, error -71<br>usb 3-2: new full speed USB
device using address 18<br>usb 3-2: device not accepting address 18, error -71<br>hub
3-0:1.0: connect-debounce failed, port 2 disabled<br>usb 3-2: new full speed USB
device using address 19<br>usb 3-2: device not accepting address 19, error -71<br>usb
3-2: new full speed USB device using address 20<br>usb 3-2: device not accepting
address 20, error -71<br>[EMAIL PROTECTED]:~#<br><br><br><br><br><br> --- On Tue
08/03, Andrew Perrin < [EMAIL PROTECTED] > wrote:<br>From: Andrew Perrin [mailto:
[EMAIL PROTECTED]<br>To: [EMAIL PROTECTED]<br> Cc: [EMAIL PROTECTED], [EMAIL
PROTECTED]<br>Date: Tue, 3 Aug 2004 08:45:00 -0400 (EDT)<br>Subject: Re: Getting
photos from USB compactFlash into linux<br><br>On Tue, 3 Aug 2004, J F wrote:<br><br>>
[EMAIL PROTECTED]:/etc# mount -t vfat /dev/sda1 /usb<br>> mount: /dev/sda1 is not a
valid block device<br>> [EMAIL PROTECTED]:/etc# mount -t vf
at /dev/sda2 /usb<br>> mount: /dev/sda2 is not a valid block device<br>> [EMAIL
PROTECTED]:/etc# ls -ld /usb<br>> drwxr-xr-x 2 root root 4096 J
ul 28 19:47 /usb<br>> [EMAIL PROTECTED]:/etc# mount -t vfat /dev/sda /usb<br>> mount:
/dev/sda is not a valid block device<br><br>Are you sure it's attached to sda?
Try:<br><br>fdisk -l /dev/sda<br>fdisk -l /dev/sdb<br>fdisk -l /dev/sdc<br>fdisk -l
/dev/sdd<br><br>etc. to figure out which has a
filesystem.<br><br>ap<br><br><br><br>----------------------------------------------------------------------<br>Andrew
J Perrin - http://www.unc.edu/~aperrin<br>Assistant Professor of Sociology, U of
North Carolina, Chapel Hill<br>[EMAIL PROTECTED] * andrew_perrin (at)
unc.edu<br><br><br><br><br><br>_______________________________________________<br>Join
Excite! - http://www.excite.com<br>The most personalized portal on the
Web!<br><br><br>-- <br>To UNSUBSCRIBE, email to [EMAIL PROTECTED] <br>with a subject
of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]<br><br>
_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
