Hi all, I'm having some issues with ttyS0 (COM1) on my mail server. I'm trying to get it to work with NUT, but I cannot communicate through the serial port.
I managed to locate and download a DOS 6.22 floppy and an app called Modem Dr, which I used (with my old serial modem) to verify my serial port physically works outside of Debian. I am currently running a custom kernel which is pretty standard except for MPPE and lm-sensors patches. Kernel 2.4.27. I have tried using Minicom to send the "Q1" command to the UPS to get its status, but it doesn't respond at all, so I really doubt this is NUT causing my problems. I have also tried installing the stock 2.4.27 i686 kernel and purging and reinstalling setserial to no avail. ttyS0 state: starserver:/etc/nut# cat /proc/tty/driver/serial serinfo:1.0 driver:5.05c revision:2001-07-08 0: uart:16550A port:3F8 irq:4 baud:2400 tx:20 rx:0 RTS|DTR|DSR If there's any further info I need to provide, then just let me know and I'll get what I can. Pete -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]