On Fri, 24 Dec 2004, Eric Gaumer wrote: > ]$ cat /proc/bus/usb/devices > > should show what's on the usb bus and what drivers are attached to each > device. Post that info and it may help turn up a solution.
/proc/bus/usb is an empty directory. On Fri, 24 Dec 2004, H. S. wrote: > What does /var/log/syslog report when you plug in the USB hard disk > (right after when you plug in the USB disk). It doesn't report anything new. > If there is nothing, then you may need to load prpoper USB modules. Any suggestions on what to load? I have usbcore, usbkbd, usb-storage, scsi_mod, and sd_mod loaded. I've included output from lsmod at the end of this message. > If I were you, I would prefer writing a udev rule (I can help with that > if you wish) and make a mount point something like /media/usb-hd so that > whenever I plug in the hd it gets automatically mounted at /media/usb-hd. What is udev? A link to docs would be fine. I'd welcome any help getting this working. :-) On Fri, 24 Dec 2004, Ron Johnson wrote: > Maybe ehci_hcd isn't loaded? It wasn't loaded. I added it but nothing has changed. > What chipset are you using? Intel 815EP chipset, I believe. I have an ASUS CUSL2-C motherboard but I'm having problems finding the specs on the Asus web site. How can I find this info in /proc? In 2.4 there was /proc/pci but that is missing in 2.6. I found /proc/bus/pci but it has different information. -- Matt Perry | matt at primefactor dot com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]