Hello Syed Huq (<[EMAIL PROTECTED]>) wrote:
>> Ditch that kernel and install another one, either kernel-image-2.2.20 >> or kernel-image-2.4.18-1-386|686|k6|k7|586. If you use 2.4.18, don't >> forget to configure lilo to use the initrd needed to boot that >> kernel. After booting with the new kernel, try again. >> > > I tried 'ditching' that kernel by upgrading to Sarge. It was a > nightmare and had to switch > back to Woody. So no solutions there. > > IF(not a possibility), I had kernel 2.4.18: > > 1) How to configure lilo > 2) Try again...try what ? > > I am still hoping someone can provide a step-by-step instructions. First, install the kernel: apt-get install kernel-image-2.4.18-1-386 Next, configure lilo. Edit the "Linux" section in /etc/lilo.conf, and add a line initrd=/initrd.img And remove the comment character before #prompt to make sure lilo will ask you which kernel to boot. Run lilo: /sbin/lilo Reboot, and select "Linux". Linux.old will boot the old kernel. best regards Andreas Janssen -- Andreas Janssen <[EMAIL PROTECTED]> PGP-Key-ID: 0xDC801674 ICQ #17079270 Registered Linux User #267976 http://www.andreas-janssen.de/debian-tipps-sarge.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]