hello, simple firewall problem:
1 external nic (eth0) 1 internal nic (eth1) i do not need to do any snat or masquerading, i am just looking to forward the traffic from the internal to the external. so far: # echo 1 > /proc/sys/net/ipv4/ip_forward # iptables -L -v Chain INPUT (policy ACCEPT 133 packets, 13277 bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 90 packets, 10840 bytes) pkts bytes target prot opt in out source destination # route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.115.24 * 255.255.255.248 U 0 0 0 eth1 localnet * 255.255.255.248 U 0 0 0 eth0 default public-address 0.0.0.0 UG 0 0 0 eth0 i have a client that is configured (via next hop routing) to have its traffic sent to the internal interface on the firewall box. tcpdump shows traffic getting to the internal interface, but not the external. any thoughts? thanks, matt zagrabelny -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]