Hi, On Fri, May 06, 2005 at 08:44:29AM +0200, Christian Kasprowicz wrote: > Hi, > > > > I work with a 2.4 kernel. > > The following modules are loaded: > > Module Size Used by Not tainted > > .... > > sg 25180 0 > > loop 8440 0 (unused) > > sr_mod 12632 0 (unused) > > ide-detect 288 0 (unused) > > ide-scsi 9072 0 > > ide-cd 29120 0 > > cdrom 27588 0 [sr_mod ide-cd] > > ide-core 98392 0 [piix ide-detect ide-scsi ide-cd] > > ... > > sd_mod 10380 14 (autoclean) > > aic7xxx 137560 7 (autoclean) > > scsi_mod 54392 5 (autoclean) [sg sr_mod ide-scsi sd_mod > aic7xxx] > > unix 13936 9 (autoclean) > > . and the dmesg output is: > > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 > > .. > > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > > scsi1 : SCSI host adapter emulation for IDE ATAPI devices > > ide2: ports already in use, skipping probe > > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > > ide-cd: ignoring drive hda > > ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio > > .as hda is definetly my cd-writer. >
Looks OK. > > > @Joachim: /proc/scsi contains: > > buero:~# ls -l -r /proc/scsi/ > > insgesamt 0 > > dr-xr-xr-x 2 root root 0 2005-05-06 08:41 sg > > -r--r--r-- 1 root root 0 2005-05-06 08:41 scsi > > dr-xr-xr-x 2 root root 0 2005-05-06 08:41 ide-scsi > > dr-xr-xr-x 2 root root 0 2005-05-06 08:41 aic7xxx less /proc/scsi/scsi ? > > /proc/scsi/sg: > > insgesamt 0 > > -rw-r--r-- 1 root root 0 2005-05-06 08:41 allow_dio > > -r--r--r-- 1 root root 0 2005-05-06 08:41 debug > > -rw-r--r-- 1 root root 0 2005-05-06 08:41 def_reserved_size > > -r--r--r-- 1 root root 0 2005-05-06 08:41 device_hdr > > -r--r--r-- 1 root root 0 2005-05-06 08:41 devices > > -r--r--r-- 1 root root 0 2005-05-06 08:41 device_strs > > -r--r--r-- 1 root root 0 2005-05-06 08:41 host_hdr > > -r--r--r-- 1 root root 0 2005-05-06 08:41 hosts > > -r--r--r-- 1 root root 0 2005-05-06 08:41 host_strs > > -r--r--r-- 1 root root 0 2005-05-06 08:41 version less /proc/scsi/sg/device_strs ? less /proc/scsi/sg/host_strs ? > > > Thanks for your help, > > Chris > Regards -- Joachim Fahnenmüller We are not anticipating any emergencies. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
