On Thu, Jun 02, 2005 at 11:38:18AM -0500, Greg Gilmour wrote: > On Thu, Jun 02, 2005 at 09:18:50AM -0600, Rob Sims wrote: > > On Wed, Jun 01, 2005 at 04:38:39PM -0500, Greg Gilmour wrote: > > > I currently have an HP Proliant DL360 G3 with two 2.8 GHz Xeon > > > processors, SmartArray 5i, and 1024 MB of memory installed currently. I > > > wanted to install more memory so I purchased and installed 2 GB more to > > > make a grand total of 3 GB of system memory (PC2100 DDR ECC) -- 2x512 MB > > > sticks and 2x1024 MB sticks. > > > > > Upon boot-up the BIOS detects all 3 GB, but once I boot into Linux it > > > only registers as 900264 KB. I've tried checking the BIOS on the server > > > > You need a kernel with high memory support. In the kernel configuration, > > it is: > > Processor type and features > > High Memory Support (4G)
> Hello Rob, > I have tried a kernel rebuild with this option (a snipit of my config is > below): > > CONFIG_MPENTIUM4=y > CONFIG_HIGHMEM4G=y > CONFIG_MTRR=y > CONFIG_SMP=y > CONFIG_MTRR=y > CONFIG_SMP=y > > But, I am still getting the same results. ... > Suggestions would be greatly appreciated. First, don't top post. Second: Look in /var/log/dmesg. On a 2.6.12-rc4, 4G kernel, 1G phys RAM, I have some lines very near the top: 127MB HIGHMEM available. 896MB LOWMEM available. On another box, 2.4.23, 64G kernel, 6G phys: 5248MB HIGHMEM available. 896MB LOWMEM available. -- Rob -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

