On Thu, Jun 23, 2005 at 12:51:06PM -0400, H. S. wrote: > Apparently, _Chris Bannister_, on 23/06/05 12:30,typed: > > Hi, > > > > Try setting Plug-n-Play to NO/OFF/FALSE in bios > > > > HTH > > > > There are around 3 method to do so (learned while googling for the > problem, maybe somewhere metioned them on this list too, not sure). I > chose an easier one. I just mention the modules of the two NICs in > /etc/modules in the order I want the cards to be numbered. So module for > eth0 goes first and for eth1 goes next. The only problem is that this > method will not work if a NIC card is replaced with another one which > may need a different module. > > ->HS
PnP should be off in the bios. It apparently upsets the order in which they are 'found/initialised'. If that doesn't help, *then* I'd start looking at other solutions. Eg. Re: DHCP problem where ip address is assigned to wrong NIC on reboot by Derrick Hudson on Tue, 21 Jun 2005. -- Chris. ====== -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
